Solaris 10 11/06 release you can do host based masking using fp.conf (/kernel/drv/fp.conf). Assuming you are using solaris provided leadville drivers.
Quote:
pwwn-lun-blacklist
Allows you to specify target port WWNs and LUN numbers you do not want configured. LUN numbers are interpreted as decimals. White spaces and commas (',') can be used in the list of LUN numbers.
Hi everyone,
I wonder if I can canvas any opinions or thoughts (good or bad) on SAN attaching a SUN V880/490 to an EMC Clarion SAN?
At the moment the 880 is using 12 internal FC-AL disks as a db server and seems to be doing a pretty good job. It is not I/O, CPU or Memory constrained and the... (2 Replies)
Hi, This is my first post and I hope I can present my questions the right way. I am going to be asked to create logical volumes for a Hitachi SAN device on a New HP 11 server. Currently, They are running their data on a EMC (prod server). They are looking to convert the data and filesystems over to... (3 Replies)
Hi,
I'd like to share this...
I see all the luns on my aix when I do lspv, 10 of them, configured by the san contractor. I defined the first sanvg no problem, the second one no problem, but the third got problem and so on. It's random after the second, I think. The error is 0516-024 mkvg:... (5 Replies)
salut admin,
Normalement mon serveur doit voir un de mes LDEV à partir de deux chemins sur le SAN et ainsi lui attribuer seulement deux Target LUNs. Or il lui en a attribué 8!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Très bizzare!
Auriez vous une idée.
Merci pour votre aide appréciée (2 Replies)
Hi
I would like to remove SAN luns from system and do not want them even after system reboot,
format
Searching for disks...done
df -kh
I know last 4 partitions are from SAN but there could be more.
Can someone please help me correct steps to remove SAN Luns.
vxdisk list
... (2 Replies)
Is it possible to use zvol from SAN LUN to install LDOM OS ? I 'm using following VDS from my service domain
VDS
NAME LDOM VOLUME DEVICE
primary-vds0 primary iso sol-10-u6-ga1-sparc-dvd.iso
cdrom ... (16 Replies)
Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage.
DS5020 mentions Enhanced Remote Mirror to multi-LUN applications
I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Hello everyone.
I've been asked to check if something is wrong with the storage setup on these two SunOS 5.10 machines, which are being used as database servers with Oracle RAC configuration. Seems to be that the DB guy is complaining, telling that they are nearly out of space, which sounds... (4 Replies)
hi! i got a rhel 6.3 host that already have an xfs filesystem mounted from a SAN (let's call it SAN-1) whose size is 9TB.
i will be receiving another SAN (let's call it SAN-2) storage of 15TB size. this new addition is physically on another SAN storage. SAN-1 is on a Pillar storage while the new... (6 Replies)
Discussion started by: rino19ny
6 Replies
LEARN ABOUT SUNOS
hpfc
hpfc(7D) Devices hpfc(7D)NAME
hpfc - Agilent fibre channel host bus adapter
SYNOPSIS
PCI pci103c
DESCRIPTION
The hpfc fibre channel host bus adapter is a SCSA compliant nexus driver that supports all Agilent fibre channel host bus adapters, includ-
ing the HHBA5100x, HHBA5101x, and HHBA5121x models. Agilent host bus adapters support the fibre channel protocol on private fibre channel
arbitrated loops and fabrics. The driver supports up to ten host bus adapters, with a maximum of 125 fibre channel devices on each host bus
adapter. The hpfc driver supports a maximum of 256 LUNs per target.
The hpfc driver does not support the BIOS Int 13 feature, which enables the booting of an operating system. As a result, you should not
install an operating system on devices attached to the hpfc driver.
CONFIGURATION
The hpfc driver attempts to configure itself using the information in the /kernel/drv/hpfc.conf configuration file.
By default, the driver supports only LUN 0 for each target device. To add multiple LUN support, modify the /kernel/drv/sd.conf file.
Before upgrading the hpfc driver, backup the sd.conf file to save customized LUN settings and then use pkgrm(1M) to remove the old version
of the driver.
The host bus adapter port is initialized to FL_Port when connected to a fabric switch. To change it to F_Port, add the init_as_nport=1
entry to the hpfc.conf file and reboot the system.
To conserve system resources, at least one disk drive must be attached to the hpfc driver. If no devices are attached, the driver will not
load.
FILES
/kernel/drv/hpfc 32-bit ELF kernel module
/kernel/drv/sparcv9/hpfc 64-bit ELF kernel module
/kernel/drv/hpfc.conf Driver configuration file
/kernel/drv/sd.conf SCSI disk configuration file
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86, SPARC |
+-----------------------------+-----------------------------+
SEE ALSO luxadm(1M), pkgrm(1M), prtconf(1M), driver.conf(4), attributes(5), ses(7D), ssd(7D)
ANSI X3.272-1996, Fibre Channel Arbitrated Loop (FC-AL),
ANSI X3.269-1996, Fibre Channel Protocol for SCSI (FCP),
ANSI X3.270-1996, SCSI-3 Architecture Model (SAM),
Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)
SunOS 5.10 10 Oct 2000 hpfc(7D)