12-09-2011
If they're using different gateways, internet traffic should just go where it's proper destination is. (Unless you're using a proxy, which would mess up its ability to tell which connection outgoing traffic belongs to.) The switch shouldn't care.
If both routers are serving DHCP, they'll of course interfere with each other when plugged into the same switch. Only one of them should be allowed to serve DHCP, probably your 'client' connection, configure your server statically.
Local traffic would be trickier. They'll be running on the same wire, so they could talk directly if they tried, but not being on the same subnet means they'll just forward it to their gateway instead, which won't work. The switch, which doesn't care at all about IP addresses, won't notice or care.
You could make it all one big happy 255.255.0.0 subnet, which would allow 192.0.0 and 192.0.10 to communicate without routing. Or you could give your clients static routes to talk to the other subnet. Or your server could be given 192.0.0 and 192.0.10 addresses on the same card so your clients don't have to talk to a "foreign" subnet.
Last edited by Corona688; 12-09-2011 at 12:13 PM..
8 More Discussions You Might Find Interesting
1. Linux
how can i see active network connections (1 Reply)
Discussion started by: youmna
1 Replies
2. IP Networking
Hello,
I have a centralized syslog server, and am wondering if there is a way to log all network connections to it (Primarily incoming, such as FTP, httpd, SSH, etc). Essentially what I would like is to get the information seen in netstat or lsof logged line by line, realtime. Is there a... (3 Replies)
Discussion started by: abstrcrndm
3 Replies
3. Linux
Hi,
I have a question on web servers and network switches.
Why a network switch should support certificate management, that means generating public and private keys... installing a certificate etcetra.
Regards
Chaitanya. :b: (4 Replies)
Discussion started by: chaitus.28
4 Replies
4. IP Networking
I rotate between a static lan, dhcp lan, and various wireless networks daily. Is there a way to set preferred network connections? I use some static ip's daily, some static ip's like once a month, and almost never use the dhcp lan. The same I do with my various wireless networks. Some I use daily... (0 Replies)
Discussion started by: cokedude
0 Replies
5. Shell Programming and Scripting
Could you help me writing a script showing which network connections are currently active?
Means output should be something like:
"eth0, wlan1, wlan3"
Problem:
The output is supposed to happen on a 16x2 LCD Display.
Currently I am doing a "Ifconfig" as output, but its too fast for the... (2 Replies)
Discussion started by: lordofazeroth
2 Replies
6. UNIX for Advanced & Expert Users
I have a static IP 47.21.154.146 and two computers which I wish to talk to each other. The two IPs are 198.168.1.5 and 198.168.1.6.
How do I do it. For example ls from one computer to the other.
TIA (8 Replies)
Discussion started by: Meow613
8 Replies
7. Red Hat
i have been learning linux from some time for linux plus exam and learned SSH protocol and have practised to connect to remote computer within Lan network and able to sucesssfully connect it .
using
ssh username@hostname
But i wish to ask how do i use same ssh protocol to connect to other ... (6 Replies)
Discussion started by: lobsang
6 Replies
8. Solaris
hello, I have a problem when configuring the network at the LDOM level, on a SPARC-Enterprise-T5120 machine
The network goes through VLAN 503 (level, network tagget)
And I need to give network to the guest domain: madarrwebsol10
I hope someone can bring some light ....
Excuse my English ...
... (4 Replies)
Discussion started by: Wittman
4 Replies
LEARN ABOUT DEBIAN
airport2-ipinspector
AIRPORT2-IPINSPECTOR(1) General Commands Manual AIRPORT2-IPINSPECTOR(1)
NAME
airport2-ipinspector - WAN monitoring utility for the Apple AirPort Extreme Base Station ("Snow")
SYNOPSIS
airport2-ipinspector
DESCRIPTION
airport2-ipinspector monitors the WAN interface of the base station and sends an email notification whenever the external (WAN) IP address
of the base station changes.
OPTIONS
airport2-ipinspector accepts no command-line options. airport2-ipinspector is a wrapper script around the IPInspector.jar jar file located
in /usr/share/java/airport-utils.
You can set the JAVACMD environment variable to use a specific JVM instead of the one chosen by the wrapper script. Set the DEBUG environ-
ment variable to 1 to get the debug output from the wrapper script.
ENVIRONMENT VARIABLES
DEBUG Set this variable to 1 to get the debug output from the wrapper script.
JAVACMD
The full path to the Java Virtual Machine to use. By default, the wrapper uses JAVACMD; if it is not set, it looks for
JAVA_BINDIR/java, then for JAVA_HOME/bin/java before looking for a java executable in the PATH. In the latter case, the JVM used can
be configured using the Debian alternatives system (see update-alternatives(8)).
JAVA_HOME
The full path where your JDK/JRE is installed.
JAVA_BINDIR
The full path to the directory where the java executable is located.
JAVA_ARGS
Extra command-line arguments to be passed to the Java Virtual Machine.
AUTHOR
airport2-ipinspector was written by Jon Sevy <jsevy@cs.drexel.edu>.
This manual page was written by Julien BLACHE <jblache@debian.org>, for the Debian project (but may be used by others).
May 20, 2006 AIRPORT2-IPINSPECTOR(1)