blocking traffic to destination network by port Post: 302580380

10 More Discussions You Might Find Interesting

1. Cybersecurity

RedHat9:How to find what is blocking the port 1526/tcp

I'm trying to configure IDS9.40 on Ret Hat 9. The server has opened the port 1526/tcp nmap (nmap -sT -O linux) reports correctly that the port is open. However, portqry (portqry.exe -n 192.168.0.101 -e 1526 -p TCP) reports that the port is closed for connection: TCP port 1526 (turbo...

2. Infrastructure Monitoring

Network Traffic

Hi all, Got a strange one here, well not so much strange, different :-) I need to work out if a server is particulary chatty, whether its talking / communicating heavily to a particular server, as Im planning to physically move the server to a different server, over a link. Hence the...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. IP Networking

iptables DNAT of outgoing destination port, unexpected behavior

Not sure if this should be here or in the security section. I am developing software that dynamically manipulates netfilter/iptables rules (through system() calls of the command strings, I'm not trying to hack the netfilter code). Basically, UDP messages that are sent by an application on, say,...

5. AIX

Blocking/starting a Port in AIX 6.1

Hello Team, We are having weblogic which running on AIX 6.1 Lpar machine. We not enabled any firewall(IPSEC) in AIX level. Our weblogic is running on cluster.Whenever we stop/restart the cluster we would like to stop/start the port(by using command) which used by the weblogic. Please...

6. IP Networking

Question about blocking incomming traffic

Hello, Like many others, I have continued to get attempts to connect to my local net router from the Asia Pacific Network Information Centre and from RIPE Network Coordination Centre, Amsterdam. I would say that 90% of attempted connections come from these two locations. The originating IP...

7. Infrastructure Monitoring

How do I know what traffic is in network port?

If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ? ps. because I always found the network is very slow , so I would like what the network port is doing . Thanks Login ID ust3 is currently in read-only mode for multiple infractions. Creating...

8. AIX

How to re-route traffic from one port to another?

Hi Friends, How to do port forwarding in AIX? We would like to re route traffic from port A to port B on AIX LPAR. for example: my application is using 8080 port on LPAR and would like to use the 8081 instead of 8080. By default application was configured with 8080. But instead of changing...

9. IP Networking

I would like to monitor network traffic for a computer on my network

My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I...

10. Shell Programming and Scripting

Unable to open firewall port for external traffic.

Below is what i did to open the firewall port on # sudo firewall-cmd --zone=public --add-port=27012/tcp --permanent Warning: ALREADY_ENABLED: 27012:tcp success # sudo firewall-cmd --reload success # firewall-cmd --list-all public target: default icmp-block-inversion: no ...

LEARN ABOUT SUSE

drop_database

DROP 
DATABASE(7)						   SQL Commands 						  DROP DATABASE(7)

NAME

       DROP DATABASE - remove a database

SYNOPSIS

       DROP DATABASE [ IF EXISTS ] name

DESCRIPTION

       DROP  DATABASE drops a database. It removes the catalog entries for the database and deletes the directory containing the data. It can only
       be executed by the database owner.  Also, it cannot be executed while you or anyone else are connected to the target database. (Connect	to
       postgres or any other database to issue this command.)

       DROP DATABASE cannot be undone. Use it with care!

PARAMETERS

       IF EXISTS
	      Do not throw an error if the database does not exist. A notice is issued in this case.

       name   The name of the database to remove.

NOTES

       DROP DATABASE cannot be executed inside a transaction block.

       This  command  cannot  be  executed  while  connected  to  the target database. Thus, it might be more convenient to use the program dropdb
       [dropdb(1)] instead, which is a wrapper around this command.

COMPATIBILITY

       There is no DROP DATABASE statement in the SQL standard.

SEE ALSO

       CREATE DATABASE [create_database(7)]

SQL - Language Statements					    2010-05-14							  DROP DATABASE(7)

10 More Discussions You Might Find Interesting

1. Cybersecurity

RedHat9:How to find what is blocking the port 1526/tcp

Discussion started by: Juhasz Lajos

2. Infrastructure Monitoring

Network Traffic

Discussion started by: sbk1972

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Discussion started by: bobby320

4. IP Networking

iptables DNAT of outgoing destination port, unexpected behavior

Discussion started by: cjh19460