I am trying to block ALL traffic except when from ports 9100,22,23 to destination network 192.0.0.0 (my WAN): 2 networks 192.0.3.0 with static route to 192.0.0.0
Shouldn't this work?:
I tried it but it blocked everything on my router and cut off internet access.
Should I but the "DROP" line before the "ACCEPT" lines?
I'm trying to configure IDS9.40 on Ret Hat 9.
The server has opened the port 1526/tcp
nmap (nmap -sT -O linux) reports correctly that the port is open.
However, portqry (portqry.exe -n 192.168.0.101 -e 1526 -p TCP) reports that the port is closed for connection:
TCP port 1526 (turbo... (0 Replies)
Hi all,
Got a strange one here, well not so much strange, different :-)
I need to work out if a server is particulary chatty, whether its talking / communicating heavily to a particular server, as Im planning to physically move the server to a different server, over a link. Hence the... (6 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Not sure if this should be here or in the security section.
I am developing software that dynamically manipulates netfilter/iptables rules (through system() calls of the command strings, I'm not trying to hack the netfilter code). Basically, UDP messages that are sent by an application on, say,... (0 Replies)
Hello Team,
We are having weblogic which running on AIX 6.1 Lpar machine. We not enabled any firewall(IPSEC) in AIX level.
Our weblogic is running on cluster.Whenever we stop/restart the cluster we would like to stop/start the port(by using command) which used by the weblogic. Please... (2 Replies)
Hello,
Like many others, I have continued to get attempts to connect to my local net router from the Asia Pacific Network Information Centre and from RIPE Network Coordination Centre, Amsterdam. I would say that 90% of attempted connections come from these two locations. The originating IP... (5 Replies)
If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ?
ps. because I always found the network is very slow , so I would like what the network port is doing .
Thanks
Login ID ust3 is currently in read-only mode for multiple infractions. Creating... (0 Replies)
Hi Friends,
How to do port forwarding in AIX? We would like to re route traffic from port A to port B on AIX LPAR.
for example: my application is using 8080 port on LPAR and would like to use the 8081 instead of 8080. By default application was configured with 8080. But instead of changing... (2 Replies)
My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I... (15 Replies)
Below is what i did to open the firewall port on
# sudo firewall-cmd --zone=public --add-port=27012/tcp --permanent
Warning: ALREADY_ENABLED: 27012:tcp
success
# sudo firewall-cmd --reload
success
# firewall-cmd --list-all
public
target: default
icmp-block-inversion: no
... (10 Replies)
Discussion started by: mohtashims
10 Replies
LEARN ABOUT DEBIAN
shorewall-exclusion
SHOREWALL-EXCLUSION(5) [FIXME: manual] SHOREWALL-EXCLUSION(5)NAME
exclusion - Exclude a set of hosts from a definition in a shorewall configuration file.
SYNOPSIS
!address-or-range[,address-or-range]...
!zone-name[,zone-name]...
DESCRIPTION
The first form of exclusion is used when you wish to exclude one or more addresses from a definition. An exclaimation point is followed by
a comma-separated list of addresses. The addresses may be single host addresses (e.g., 192.168.1.4) or they may be network addresses in
CIDR format (e.g., 192.168.1.0/24). If your kernel and iptables include iprange support, you may also specify ranges of ip addresses of the
form lowaddress-highaddress
No embedded whitespace is allowed.
Exclusion can appear after a list of addresses and/or address ranges. In that case, the final list of address is formed by taking the first
list and then removing the addresses defined in the exclusion.
Beginning in Shorewall 4.4.13, the second form of exclusion is allowed after all and any in the SOURCE and DEST columns of
/etc/shorewall/rules. It allows you to omit arbitrary zones from the list generated by those key words.
Warning
If you omit a sub-zone and there is an explicit or explicit CONTINUE policy, a connection to/from that zone can still be matched by the
rule generated for a parent zone.
For example:
/etc/shorewall/zones:
#ZONE TYPE
z1 ip
z2:z1 ip
...
/etc/shorewall/policy:
#SOURCE DEST POLICY
z1 net CONTINUE
z2 net REJECT
/etc/shorewall/rules:
#ACTION SOURCE DEST PROTO DEST
# PORT(S)
ACCEPT all!z2 net tcp 22
In this case, SSH connections from z2 to net will be accepted by the generated z1 to net ACCEPT rule.
In most contexts, ipset names can be used as an address-or-range. Beginning with Shorewall 4.4.14, ipset lists enclosed in +[...] may also
be included (see shorewall-ipsets[1] (5)). The semantics of these lists when used in an exclusion are as follows:
o !+[set1,set2,...setN] produces a packet match if the packet does not match at least one of the sets. In other words, it is like NOT
match set1 OR NOT match set2 ... OR NOT match setN.
o +[!set1,!set2,...!setN] produces a packet match if the packet does not match any of the sets. In other words, it is like NOT match set1
AND NOT match set2 ... AND NOT match setN.
EXAMPLES
Example 1 - All IPv4 addresses except 192.168.3.4
!192.168.3.4
Example 2 - All IPv4 addresses except the network 192.168.1.0/24 and the host 10.2.3.4
!192.168.1.0/24,10.1.3.4
Example 3 - All IPv4 addresses except the range 192.168.1.3-192.168.1.12 and the network 10.0.0.0/8
!192.168.1.3-192.168.1.12,10.0.0.0/8
Example 4 - The network 192.168.1.0/24 except hosts 192.168.1.3 and 192.168.1.9
192.168.1.0/24!192.168.1.3,192.168.1.9
Example 5 - All parent zones except loc
any!loc
FILES
/etc/shorewall/hosts
/etc/shorewall/masq
/etc/shorewall/rules
/etc/shorewall/tcrules
SEE ALSO shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5), shorewall-rtrules(5), shorewall-routestopped(5), shorewall-rules(5),
shorewall.conf(5), shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5),
shorewall-tunnels(5), shorewall-zones(5)NOTES
1. shorewall-ipsets
http://www.shorewall.net/manpages/shorewall-ipsets.html
[FIXME: source] 06/28/2012 SHOREWALL-EXCLUSION(5)