11-29-2011
I don't fully understand your situation.
Are you saying you can ping the default gateway from within the zone, but not from the global zone?
Have you configured your zone to use ip-type=shared (default) or ip-type=exclusive
If your zone is configured as ip-type=shared it will use the global zone's default gateway etc. You cannot change any IP settings within the zone itself.
On the other hand, if you have configured your zone as ip-type=exclusive it should be a simple case of added your default gateway to the /etc/defaultrouter file within the zone.
This User Gave Thanks to soliberus For This Post:
9 More Discussions You Might Find Interesting
1. Solaris
Hi All ,
I try to install some packages in my global zone...
On the execution of the installion of the script it quits by saying the error
"Non global zone check failed"
Kindly help me in this regard
Thanks in advance,
jeganr (7 Replies)
Discussion started by: jegaraman
7 Replies
2. Solaris
Hi Gurus
I am not able to ping the local zone from global zone
when i am trying to ping i am getting below
ICMP Host Unreachable from gateway zone ( 192.268.35.210)
for icmp from zone ( 192.168.35.210) to sun1 ( 192.168.35.210)
However i can ping local zone from global
please... (12 Replies)
Discussion started by: kumarmani
12 Replies
3. Solaris
Hi All
There is one folder in global zone I just want to share the same folder innon global zone. How can i do it?
pls send me script for this. (2 Replies)
Discussion started by: vijaysachin
2 Replies
4. Solaris
Hi,
We have had a hard drive failure on one of our sandbox OpenSolaris system. We had 2 solaris zones configured at /tank/zones/teamcity and /tank/zones/jira for respective products.
The zpool (tank) was mirrored (2 drives). I'd like to mount the non-faulty drive in the global zone and... (4 Replies)
Discussion started by: sophie.cowell
4 Replies
5. Solaris
can some one help me out as it is showing 2 different time zones in global zone and nonglobal zone .In global zone it is showing in GMT while in nonglobal zone i it showing as PDT.
System in running with solaris 10 (3 Replies)
Discussion started by: ravijanjanam12
3 Replies
6. Solaris
So this is Solaris 11.1. I have a Global zone that has several non-global zones running in it. I want to change the capped-memory.physical resources setting in ALL the zone configs of the running zones.
if I were to do this manually here's what I would do:
zonecfg -z zone1
select... (2 Replies)
Discussion started by: os2mac
2 Replies
7. Solaris
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Discussion started by: Shirishlnx
0 Replies
8. Solaris
Hi,
First post.
I have a script that I am having a little trouble with and I hope someone can help.
I will post the code for your input, but I want to read the lines of a file and use this as input to a command in a while loop...
#!/bin/sh
#
#
### Variables
MSG=/tmp/tmptest.txt... (7 Replies)
Discussion started by: dakelly
7 Replies
9. Solaris
Hi, hoping someone can help, its been a while since I used Solaris.
After creating a NGZ (non global zone), the NGZ can access the GZ (Global Zone) and the GZ can access the NGZ (using ssh, zlogin)
However, the NGZ cannot access any other netwqork devices, it can't even see the default router
... (2 Replies)
Discussion started by: GazinLincoln
2 Replies
LEARN ABOUT OPENSOLARIS
net_zoneidtonetid
net_zoneidtonetid(9F) Kernel Functions for Drivers net_zoneidtonetid(9F)
NAME
net_zoneidtonetid - map a zoneid_t struture identifier to a netid_t structure
SYNOPSIS
#include <sys/neti.h>
netid_t net_zoneidtonetid(const zoneid_t zone);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI).
PARAMETERS
zone valid zoneid_t structure that refers to a running zone.
DESCRIPTION
The net_zoneidtonetid() function maps the given zoneid_t structure (used to represent a zone that is currently running) into a netid_t
structure that is associated with the IP instance supporting network functions for that zone.
RETURN VALUES
The net_zoneidtonetid() function returns -1 if no mapping took place. Otherwise, it returns the netid_t structure currently used by the
zoneid_t structure. For zones that are using a shared IP instance, the netid_t structure for the instance owned by the global zone is
returned.
CONTEXT
The net_zoneidtonetid() function may be called from user, kernel, or interrupt context.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Committed |
+-----------------------------+-----------------------------+
SEE ALSO
net_netidtozonid(9F), attributes(5)
SunOS 5.11 1 May 2008 net_zoneidtonetid(9F)