How do I check my system to see if the graphics are using hardware 3d suport or not. I have a TNT2 on RH 7.1 kernel 2.4.9-?(can't remember off top of my head)I'm running all the latest updates from RH. Also I now have a dvd drive and I am trying to find a player that will play all movies and not... (1 Reply)
Hello again,
I would like to know if the following commands:
diag, errpt, lscfg, lspv, lsvg, lsps, lslv for AIX and
prtdiag, psrinfo, sysdef for SUN are native to these systems or if they are in fact scripts that are added after the unix installation.
Thank you in advance.
Have a nice day (4 Replies)
HI ALL,
I am new tp HPUX and i am looking for command that will retive me the following information on HPUX:
Chassis Name & Serial Number:
Monitor
Name
BIOS
Name
EthernetPort
Name
IPEndpoint
Name
PointingDevice
Name
Keyboard
NetworkPrinter
Name
LocalPrinter (5 Replies)
Hello all,
i've written a small piece of code that will read commands from standard input and executes the commands.
Its working fine and is execting the commands well. Accepting arguments too. e.g
#mkdir <name of the directory>
The problem is that its not letting me change the directory i.e... (4 Replies)
I want to log into a remote server transfer over a new config and then backup the existing config, replace with the new config.
I am not sure if I can do this with BASH scripting.
I have set up password less login by adding my public key to authorized_keys file, it works.
I am a little... (1 Reply)
Hi all
Got another strange one. If I try to enquire about the hardware, the command hangs implying Ive got a hardware issue. So, if I execute :-
iostat -en
sysdef - ( stops at the devices part )
format
cfgadm -al
Anything that searches the devices, then the command hangs.
... (4 Replies)
Can someone help me with what I am guessing is a simple job for an AIX admin. However I am 100% HP-UX and not touched AIX before the start of this week.
I am trying to connect an IBM Blade (JS22) to our HP Enterprise Tape Library. I have done all the SAN zoning and this appears to be happy... (5 Replies)
Hi all,
I'm new in this forum.
I'm looking for the difference between the HACMP commands with the prefix "cl" and "cli".
The first type are under /usr/es/sbin/cluster/sbin directory and the second are under /usr/es/sbin/cluster/cspoc directory.
I know that the first are called HACMP for AIX... (0 Replies)
Hi folk,
I have this hardware faunty message, but dont know which hardware is this ? can you guide me ?
--------------- ------------------------------------ -------------- ---------
TIME EVENT-ID MSG-ID SEVERITY
---------------... (9 Replies)
Discussion started by: dehetoxic
9 Replies
LEARN ABOUT SUSE
ifservices
IFSERVICES(5) Network configuration IFSERVICES(5)NAME
ifservices-* - control network services with ifup/down
SYNOPSIS
/etc/sysconfig/network/ifservices-<configuration_name>/
DESCRIPTION
The directory /etc/sysconfig/network/ifservices-<configuration_name>/ is read by the script /etc/sysconfig/network/scripts/ifup-services
which starts and stops system services when an interface is set up/down. ifup-services is used by /sbin/ifup, which is the command line
user interface for setting up network interfaces.
This is useful if you don't have a permanent network connection. If you sometimes boot without network and plug in the network cable later
you can add links to system services in this directory. These services will then be started with ifup and stopped with ifdown.
The configuration name used for ifservices-* should match exactly the configuration name of the ifcfg-* file for the interface.
For the usage with NetworkManager (where you don't necessarily need a ifcfg-* file) you can also use /etc/sysconfig/network/ifser-
vices-<interface>-<essid>/ (for wlan interfaces) or if that does not exist /etc/sysconfig/network/ifservices-<interface>/. As a final
fallback /etc/sysconfig/network/ifservices/ is checked as well. If NetworkManager is active services will be stopped after the interface is
down.
The links in this directory are equal to the links in the runlevel directories /etc/init.d/rc*.d/ They have to point to service start
scripts which are usually in /etc/init.d/. Links starting with 'S' are start links, which are called in alphabetical order after ifup has
set up the interface. Links starting with 'K' are kill links which are called before ifdown takes down the interface. See also section
Sequencing Directories in boot (7).
EXAMPLE
In this example we use an interface with MAC address 00:de:ad:be:af:00. This interface is not always physically connected. As soon as you
plug in the cable ypbind and autofs should be started. When you pull the cable they should be stopped. This can be reached with:
in file /etc/sysconfig/network/ifcfg-eth-id-00:de:ad:be:af:00
...
STARTMODE=ifplugd
...
in dir /etc/sysconfig/network/ifservices-eth-id-00:de:ad:be:af:00/
S10portmap -> /etc/init.d/portmap
S20ypbind -> /etc/init.d/ypbind
S30autofs -> /etc/init.d/autofs
S20autofs -> /etc/init.d/autofs
K30ypbind -> /etc/init.d/ypbind
Now you have to disable the start of this services at boot time
chkconfig ypbind off
chkconfig autofs off
Notes:
You may call scripts/create-ifservices-directory [<interface_name>] to create a directory with the links from this example. This will cre-
ate the directory ifservices-<interface_name> or if no interface name was given ifservices-template.
Maybe you have to add also variable IFPLUGD_PRIORITY. For details about startmode ifplugd read ifup (8).
The service portmap had to be added because ypbind needs it. This service is still started at boot time because it does not need an active
network connection. But ypbind may now be started earlier as usual. Therefore we make sure that portmap is started before. Starting an
already running service again does not affect the service.
SEE ALSO ifup(8), ifcfg(5).
AUTHOR
Christian Zoz <zoz@suse.de>
sysconfig February 2005 IFSERVICES(5)