Who in the 64 ubuntu adopted cisco vpn client on the wireless network
I downloaded the cisco vpn client for linux but run vpn_install make file when an error in cisco with the help of the document read in half a day, nor do I know this vpn client in the 64 systems in use.
Who can help me, a... (1 Reply)
Hello,
Does anyone know where I can find configuration information on setting up
a dial in VPN on Cicso IOS for a bunch of servers.
Could not seem to find anything in search engines.
Thanks (0 Replies)
Hi all, This will save me a tremendous amount of time if i can get this script working. I have alot of sites i need to connect to using cisco vpn and then ssh onto servers to retrieve some info. Its all repetitative and it needs scripted.
what i have done so far is put this into a script.
... (0 Replies)
Anyone had installed Cisco AnyConnect VPN client on RedHat5.3 EL or CentOS 5.3?
I tried on CentOS 5.3 but always getting host unreachable error. Same for windows xp works fine.
The error log reports:
Sep 1 19:14:03 localhost vpnagent: Function: tableCallbackHandler File: RouteMgr.cpp Line:... (3 Replies)
Hi all,
I am trying to configure and connect Cisco VPN on Ubuntu 10.04.
I've imported .pcf file. The new vpn conn appears in the VPN Connections option. Now when I select it, it doesn't connect. Nothing happens.
I am not able to connect to VPN at all. I tried using kvpnc as well but it... (10 Replies)
Hi Gurus of UNIX, I have a problem when I try to install a software VPN Cisco in Laptop (HP530).
I do the following procedures:
Part 2 - VPN Client Compilation
We will now set up the vpn client. As there is no official Cisco VPN Client for OpenSolaris X86 available, we will use vpnc.... (1 Reply)
I have a Cisco 1841 router configured as Easy VPN Server. Here is the configuration of the router:
Cisco# Cisco#show running-config Building configuration... Current configura - Pastebin.com
I have a Centos 5.7 server with installed Cisco VPN client for Linux. The client successfully... (0 Replies)
Hi,I want connect my ASA 5510 firewall to a 3750 switch with RIP routing. Unfortunately,I am having issues passing the VPN subnet through rip to the 3750.I don't understand how the routing table is populated on the ASA. Any suggestions? (0 Replies)
Discussion started by: Ayaerlee
0 Replies
LEARN ABOUT DEBIAN
shorewall-rtrules
SHOREWALL-RTRULES(5) [FIXME: manual] SHOREWALL-RTRULES(5)NAME
rtrules - Shorewall Routing Rules file
SYNOPSIS
/etc/shorewall/rtrules
DESCRIPTION
Entries in this file cause traffic to be routed to one of the providers listed in shorewall-providers[1](5).
The columns in the file are as follows.
SOURCE (Optional) - {-|[&]interface|address|interface:address}
An ip address (network or host) that matches the source IP address in a packet. May also be specified as an interface name optionally
followed by ":" and an address. If the device lo is specified, the packet must originate from the firewall itself.
Beginning with Shorewall 4.5.0, you may specify &interface in this column to indicate that the source is the primary IP address of the
named interface.
DEST (Optional) - {-|address}
An ip address (network or host) that matches the destination IP address in a packet.
If you choose to omit either SOURCE or DEST, place "-" in that column. Note that you may not omit both SOURCE and DEST.
PROVIDER - {provider-name|provider-number|main}
The provider to route the traffic through. May be expressed either as the provider name or the provider number. May also be main or 254
for the main routing table. This can be used in combination with VPN tunnels, see example 2 below.
PRIORITY - priority
The rule's numeric priority which determines the order in which the rules are processed. Rules with equal priority are applied in the
order in which they appear in the file.
1000-1999
Before Shorewall-generated 'MARK' rules
11000-11999
After 'MARK' rules but before Shorewall-generated rules for ISP interfaces.
26000-26999
After ISP interface rules but before 'default' rule.
MARK - {-|mark[/mask]}
Optional -- added in Shorewall 4.4.25. For this rule to be applied to a packet, the packet's mark value must match the mark when
logically anded with the mask. If a mask is not supplied, Shorewall supplies a suitable provider mask.
EXAMPLES
Example 1:
You want all traffic coming in on eth1 to be routed to the ISP1 provider.
#SOURCE DEST PROVIDER PRIORITY MASK
eth1 - ISP1 1000
Example 2:
You use OpenVPN (routed setup /tunX) in combination with multiple providers. In this case you have to set up a rule to ensure that the
OpenVPN traffic is routed back through the tunX interface(s) rather than through any of the providers. 10.8.0.0/24 is the subnet chosen
in your OpenVPN configuration (server 10.8.0.0 255.255.255.0).
#SOURCE DEST PROVIDER PRIORITY MASK
- 10.8.0.0/24 main 1000
FILES
/etc/shorewall/rtrules
SEE ALSO
http://shorewall.net/MultiISP.html
http://shorewall.net/configuration_file_basics.htm#Pairs
shorewall(8), shorewall-accounting(5), shorewall-actions(5), shorewall-blacklist(5), shorewall-hosts(5), shorewall_interfaces(5),
shorewall-ipsets(5), shorewall-maclist(5), shorewall-masq(5), shorewall-nat(5), shorewall-netmap(5), shorewall-params(5),
shorewall-policy(5), shorewall-providers(5), shorewall-proxyarp(5), shorewall-routestopped(5), shorewall-rules(5), shorewall.conf(5),
shorewall-secmarks(5), shorewall-tcclasses(5), shorewall-tcdevices(5), shorewall-tcrules(5), shorewall-tos(5), shorewall-tunnels(5),
shorewall-zones(5)NOTES
1. shorewall-providers
http://www.shorewall.net/manpages/shorewall-providers.html
[FIXME: source] 06/28/2012 SHOREWALL-RTRULES(5)