Hi,
After a reboot, One of My Proliant Machine DL380 could not load the O/S.
Raid 1+0 was configured.
Some Gathered Facts:
During Boot from System Rescue, the following message appears
"You don't have any linux partitions.Press return to get a shell. The system will reboot... (1 Reply)
Hi,
Could somebody sent me sample output of below commands on
1) Debian linux and 2) RHEL3 and 3) any RHEL version less than 3,
a) uname -a
b) cat /etc/issue
c) cat /etc/redhat-release or other equivalent file
Thanks in advance
- Krishna (0 Replies)
I have a RHEL 5.2 server that I need to connect a new HP Laserjet p2035n networked printer. I can not install the latest version of 'hplip' since it generates an error (missing lib....) Does anyone know where I can find a PPD file for CUPS?
Or can anyone tell how to remove the double blank... (1 Reply)
Hi Everyone,
I have a machine where RHEL(Red Hat Enterprise Linux) is installed and few of our products are saved on the same.
Our products work only on sparc 6 + and i want to basically asve the products on the machine which has RHEL installed on it and mount the drive on the sun server and... (2 Replies)
I have a Red Hat Enterprise 4.6 virtual server built on 1 virtual disk running Oracle Applications on VMware ESX 3.5; the performance of the virtual server is not good because of IO bottlenecks. The ESX server is reporting minimal load, it's the virtual server which is struggling with disk IO... (2 Replies)
Hi,
I modified file /etc/pam.d/system-auth, to include "dcredit=-1 lcredit=-1 ucredit=-1"
Now no one can login in. I still have an open session...but I cant even su to another account.
I restored the file to the original, but still, no one can login in!
Any help very appreciated!
... (2 Replies)
Hi all,
Im studying rhcsa as of now, so yum installation and dependencies are messing me to not workit out.
i have dual os, win 7 & rhel 6.
i have tried this installation of vsftpd package with rhel 6 dvd in VM rhel 6 in win 7 as well as host rhel 6.still the same issue.
below error... (6 Replies)
Hello all, I am having a bit of an issue on my Spacewalk installation. Some amplifying information is that it is Spacewalk 2.3 installed on a RHEL 6 machine and I am attempting to install/update a RHEL 5 channel/repository. I am fairly new to Spacewalk so I am still learning but this is what I... (3 Replies)
I know this question might have been asked a lot but couldn't find anything that worked. From a windows machine 'A' I can only SSH into Linux server 'B' from where I can SSH into another Linux server 'C'. I need to be able to run GUI interfaces on server C which run on my Windows machine. I... (3 Replies)
Hi
We have RHEL 6.7 on an HP physical server and want to install RHEL 7 (not upgrade) on top of it by means of virtualization. Is it possible to install/configure RHEV/KVM virtualization on base RHEL 6.7 OS instance and then install RHEL 7 as a VM guest on it? If yes, could you please guide me... (1 Reply)
Discussion started by: magnus29
1 Replies
LEARN ABOUT OSF1
syslog.conf
syslog.conf(4) Kernel Interfaces Manual syslog.conf(4)NAME
syslog.conf - syslogd configuration file
SYNOPSIS
facility.severity destination Where: Is part of the system generating the message, specified in /usr/include/sys/syslog_pri.h.
See also the syslogd(8) reference page. The severity level, which can be emerg, alert, crit, err, warning, notice, info, or debug. See
/usr/include/sys/syslog_pri.h.
The syslogd daemon logs all messages of the specified severity level plus all messages of greater severity. For example, if you
specify level err, all messages of levels err, crit, alert, and emerg or panic are logged. A local file pathname to a log file, a
host name for remote logging or a list of users. In the latter case the users will receive messages when they are logged in. An
asterisk (*) causes a message to be sent to all users who are currently logged in.
DESCRIPTION
The /etc/syslog.conf file is a system file that enables you to configure or filter events that are to be logged by syslogd. You can specify
more than one facility and its severity level by separating them with semicolons.
You can specify more than one facility logs to the same file by separating the facilities with commas, as shown in the EXAMPLES section.
The syslogd daemon ignores blank lines and lines that begin with an octothorpe (#). You can specify # as the first character in a line to
include comments in the file or to disable an entry. The facility and severity level are separated from the destination by one or more tab
characters.
If you want the syslogd daemon to use a configuration file other than the default, you must specify the file name with the following com-
mand: # syslogd -f config_file
Daily Log Files
You can specify in the /etc/syslog.conf file that the syslogd daemon create daily log files. To create daily log files, use the following
syntax to specify the path name of the message destination: /var/adm/syslog.dated/ { file} The file variable specifies the name of the log
file, for example, mail.log or kern.log. If you specify a /var/adm/syslog.dated/file path name destination, each day the syslogd daemon
creates a sub-directory under the /var/adm/syslog.dated directory and a log file in the sub-directory, using the following syntax:
/var/adm/syslog.dated/ date / file Where: The date variable specifies the day, month, and time that the log file was created. The file
variable specifies the name of the log file you previously specified in the /etc/syslog.conf file. The syslogd daemon automatically cre-
ates a new date directory every 24 hours and also when you boot the system. The current directory is a link to the latest date directory.
To get the latest logs, you only need to reference the /var/adm/syslog.dated/current directory.
EXAMPLES
The following is a sample /etc/syslog.conf file: # # syslogd config file # # facilities: kern user mail daemon auth syslog lpr binary #
priorities: emerg alert crit err warning notice info debug # kern.debug /var/adm/syslog.dated/kern.log user.debug /var/adm/sys-
log.dated/user.log daemon.debug /var/adm/syslog.dated/daemon.log auth.crit;syslog.debug /var/adm/syslog.dated/syslog.log mail,lpr.debug
/var/adm/syslog.dated/misc.log msgbuf.err /var/adm/crash.dated/msgbuf.savecore kern.debug /var/adm/messages kern.debug /dev/console *.emerg
*
FILES
/etc/syslog.conf
/etc/syslog.auth - Authorization file for remote logging.
/usr/include/sys/syslog_pri.h - Common components of a syslog event log record.
RELATED INFORMATION
Commands: /usr/sbin/syslogd(8), /usr/sbin/binlogd(8)
System Administration delim off
syslog.conf(4)