Sponsored Content
Top Forums UNIX for Advanced & Expert Users Identify failed disk in Linux RAID Post 302569823 by Loic Domaigne on Tuesday 1st of November 2011 04:28:31 PM
Old 11-01-2011
Gidday,

just for the record - The procedure to find the physical faulty disk worked. Only step 4. was not correct

Quote:
4. Rebuild the mirror with the new disk
The rebuild has been triggered simply with:
Code:
# mdadm --manage /dev/md1 /dev/sdd5

(disk /dev/sdd had failed, and partition 5 was part of the md1 array)

HTH,
Loïc
 

9 More Discussions You Might Find Interesting

1. Solaris

Upgrade disk in RAID 1

I need to upgrade 2 x 73 GB disk and replace with 2 x 146 GB disk in sun v240. These disks contain boot and swap files These are mirrored disks with RAID 1 I am trining to create the correct procedure. So far the procedure I have is as follows: # metastat State: Okay ... (5 Replies)
Discussion started by: photon
5 Replies

2. AIX

to identify failed pv

Hi friends,.... am sindhiya, i have joined as AIX level 1 support. help me to identify the failed pv in vg which has some 4 physical volumes? (2 Replies)
Discussion started by: sindhiya
2 Replies

3. AIX

how to identify the raid type on aix

hi how to identify the raid type on aix? thx (1 Reply)
Discussion started by: melanie_pfefer
1 Replies

4. Linux

how to identify the raid type on Linux?

Hi any idea on why I am getting this? /sbin/mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. thanks. (2 Replies)
Discussion started by: melanie_pfefer
2 Replies

5. Filesystems, Disks and Memory

Failed raid 1 partition cannot re-add

I found out that the raid 1 was degraded: # cat /proc/mdstat Personalities : md3 : active raid1 sda5 sdb5 1822445428 blocks super 1.0 md2 : active raid1 sda3(F) sdb3 1073741688 blocks super 1.0 md1 : active raid1 sda2 sdb2 524276 blocks super 1.0 md0 : active raid1 sda1... (0 Replies)
Discussion started by: ZaNaToS
0 Replies

6. AIX

RAID 10 Failed Drive Swap

I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can... (5 Replies)
Discussion started by: mpeter05
5 Replies

7. Shell Programming and Scripting

Identify failed file transfers during SFTP

Hi All, I have a pretty demanding requirement for an SFTP script I have been trying to put together. I have nearly 100 files (all with the names staring with T_PROD) generated in my local server daily. I need to transfer each of these files to a remote server via SFTP (that's a client... (6 Replies)
Discussion started by: Aviktheory11
6 Replies

8. Solaris

Patching on Raid 0 Disk

Dear All , We need to do patching on one Solaris Server , where we have raid 0 configured. What is the process to patch a Server if RAID 0 (Concat/Stripe) is there. Below is the sample output. # metadb flags first blk block count a m pc luo 16 ... (1 Reply)
Discussion started by: jegaraman
1 Replies

9. Solaris

Failed to identify flash rom on Sunfire V240 running Solaris 10

Hi Guys, I have performed OBP & ALOM upgrade on V240 system. One of my system, running Solaris 10, having issue to identify flash rom during ALOM 1.6.10 version upgrade (OBP upgraded to latest one). May I know what the reason of this error and how can I fix it so I can upgrade ALOM using... (0 Replies)
Discussion started by: myrpthidesis
0 Replies
All times are GMT -4. The time now is 11:55 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy