I need to upgrade 2 x 73 GB disk and replace with 2 x 146 GB disk in sun v240.
These disks contain boot and swap files
These are mirrored disks with RAID 1
I am trining to create the correct procedure.
So far the procedure I have is as follows:
# metastat
State: Okay
... (5 Replies)
Hi friends,....
am sindhiya,
i have joined as AIX level 1 support.
help me to identify the failed pv in vg which has some 4 physical volumes? (2 Replies)
I found out that the raid 1 was degraded:
# cat /proc/mdstat
Personalities :
md3 : active raid1 sda5 sdb5
1822445428 blocks super 1.0
md2 : active raid1 sda3(F) sdb3
1073741688 blocks super 1.0
md1 : active raid1 sda2 sdb2
524276 blocks super 1.0
md0 : active raid1 sda1... (0 Replies)
I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can... (5 Replies)
Hi All,
I have a pretty demanding requirement for an SFTP script I have been trying to put together.
I have nearly 100 files (all with the names staring with T_PROD) generated in my local server daily. I need to transfer each of these files to a remote server via SFTP (that's a client... (6 Replies)
Dear All ,
We need to do patching on one Solaris Server , where we have raid 0 configured.
What is the process to patch a Server if RAID 0 (Concat/Stripe) is there.
Below is the sample output.
# metadb
flags first blk block count
a m pc luo 16 ... (1 Reply)
Hi Guys,
I have performed OBP & ALOM upgrade on V240 system. One of my system, running Solaris 10, having issue to identify flash rom during ALOM 1.6.10 version upgrade (OBP upgraded to latest one).
May I know what the reason of this error and how can I fix it so I can upgrade ALOM using... (0 Replies)