Hello, all. My english is not good.
I have a problem installing FreeBsd.
I have not CD-Roms, so i use program FlashBoot for convert iso-image to USB Device.
After, I was beginning to install FreeBsd (Sorry my english)
When it's time to choose an installation media, i select 9 USB: http://www.freebsd.org/doc/handbook/install/media.png
however a message tells me:
My next step was to Re-scan devices: http://www.freebsd.org/doc/en_US.ISO...ll/options.png
I use space bar to select this option, but nothing happened.
After that I try again to choose the installation media:
Help me.
Hello,i have laserjet 1000 usb printer on fbsd 4.7
when i connect it to usb, usbdev tells me it is working, on port ulpt0 (whatever). When i send some data to port it doesn't tell me any error, printcap is modifyed according manual,
and
lpr -Plj /etc/rc.conf gives me following error
/kernel:... (1 Reply)
AM TRYING TO CONNECT A USB EXTERNAL DRIVE FOR BACKUP,THE USB SLOT IS AVAILABLE,BUT I DONT KNOW IF IT IS READY WHEN I CONNECT IT,AND WHAT COMMANDS DO I NEED.
tHANKS (10 Replies)
I inserted a 8GB usb stick in a number of machine with FreeBSD 7.1, but the medium was not detected:
$ dmesg | grep MB
usable memory = 4263022592 (4065 MB)
avail memory = 4082540544 (3893 MB)
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ad0: 238475MB <WDC WD2500BEVT-00ZCT0... (6 Replies)
I have a number of questions regarding using usb sticks on xfce and freebsd.
1- Does the thunar volume manager (xfce plugin) actually provide a means to automount usb sticks? I have set all possible options in the volume manager, but have not had any automount yet.
2- Is there any utility on... (0 Replies)
When mounting a USB stick or pen drive on a FreeBSD machine I always issue the following command:
mount -t msdosfs /dev/da0s1 /mnt
Something I have always wondered is what the option msdosfs stands for and more importantly, why it is necessary. (7 Replies)
In linux system when a pnp usb device is plugged in then how does the system gets a notification of it?
I mean to say in linux usb system there is usb host controller above which is host controller driver above which is usb core.
So does the host controller/usb core keeps on polling the usb bus... (1 Reply)
Hello. I'm going to make freebsd live usb based on FreeBSD-8.3-RELEASE-i386-livefs.iso. The iso is 257 Megabytes, but after i copy its content to usb drive its volume increases to 971 Megabytes. I tried different methods of copying (tar,cp,cpio) but with the same result. Could anyone help? (0 Replies)
Hi,
i am developing an application on an ARM 7 architatcure with a small Linux.
i want to run tar on a usb device (~10 Mb) but it runs realy slow. the command only takes 1% of cpu usage.
is there a way to improve the tar command or is the USB-Connection the bottleneck here? (4 Replies)
Discussion started by: louisk
4 Replies
LEARN ABOUT DEBIAN
mic-livecd-iso-to-disk
MIC-LIVECD-ISO-TO-DISK(1) General Commands Manual MIC-LIVECD-ISO-TO-DISK(1)NAME
mic-livecd-iso-to-disk - Convert a livecd image to a live USB image then write to a USB disk or partition
SYNOPSIS
mic-livecd-iso-to-disk [--reset-mbr] [--noverify] [--overlay-size-mb <size>] [--home-size-mb <size>] [--unencrypted-home] <isopath>
[usbstick device]
<isopath> is your livecd image path name, [usbstick device] is optional, if not provided, it will detect automatically and ask you to
select.
DESCRIPTION
mic-livecd-iso-to-disk can convert a livecd image to a live USB image and write it to a USB disk or partition, it is different from mic-
image-writer which is just a safer dd with progress bar.
mic-livecd-iso-to-disk can detect all the removable USB disks and let you select one of them, if you didn't insert any USB disk, it will
ask you to insert until a USB disk is available, it can decide if your USB disk need to be formated and if your USB disk has an appropriate
partition for this livecd image, all the operations are interactive and have warnings f they will damage your old data on your USB disk.
mic-image-manager has a GUI tool for it.
OPTIONS --reset-mbr Set MBR on your USB disk
--noverify Don't verify your livecd image
--overlay-size-mb Specify overlay size, the default size is 64 MB
--home-size-mb Specify home size, the default is 0
EXAMPLES
Write a Molib live image to your USB disk:
mic-livecd-iso-to-disk your-2.1-final.img
EXIT STATUS
mic-livecd-iso-to-disk returns a zero exist status if it succeeds, otherwise return non-zero and print error message.
AUTHOR
Yi Yang, Anas Nashif, Jianfeng Ding
SEE ALSO mic-image-creator(1), mic-convertor(1), mic-chroot(1), mic-image-writer(1), mic-image-manager(1)perl v5.12.3 2011-05-31 MIC-LIVECD-ISO-TO-DISK(1)