Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Ethtool script not running on boot.
Operating Systems Linux Red Hat Ethtool script not running on boot. Post 302566732 by torley on Friday 21st of October 2011 11:11:00 AM
Old 10-21-2011
No new firmware available so probably no fix for the underlying incompatibility but I'll give Intel's proprietary drivers a try as they may include a configuration utility - this is how I solved the problem on my Windows 7 install.

Probably won't have a chance to do this until quite a bit later today.

---------- Post updated at 04:11 PM ---------- Previous update was at 08:19 AM ----------

Can't compile the intel e100 driver - it keeps failing and advising that it can't install on kernel's older than 2.4 when I'm using 2.6.40. Removed the coding from the Makefile that stops it proceeding but I have no faith in the installed result as there was a long list of errors following make install.

Driver in use is intel's e1000e.

To be honest I'm about ready to give up on this and just purchase a new NIC, it's been an ongoing problem for some time.
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Running a program on boot!

Hi there! I tried to search for something like this here but couldn't find anything. I need to run a specific program when linux starts up. I need to run it after the rp-pppoe has started because this prog needs internet connection. I start the program by entering ./dynix start (its in my home... (4 Replies)
Discussion started by: D-Lexy
4 Replies

2. Filesystems, Disks and Memory

Compile a code for running on boot

How can I compile a code that can be runned on boot:?? (2 Replies)
Discussion started by: d4n1l0d
2 Replies

3. Ubuntu

system not booting after running local boot scripts

I have two systems in my computer . I update the ubuntu system these days and always interrupt it and exit the system . now the system cannot boot after Running local boot scripts(/etc/rc.local), it just stops there. i have to terminate the gnome display manager. what can i do with it ? thank... (0 Replies)
Discussion started by: tcb3210
0 Replies

4. Solaris

Running from Shell Vs running from RC script

Hi, i have a script which need to do behave differently when run as a startup process from init.d/ rc2.d script and when run manually from shell. How do i distinguish whether my script is run by init process or by shell?? Will the command /proc/$$/psinfo | grep "myscript" work well???... (2 Replies)
Discussion started by: vickylife
2 Replies

5. Shell Programming and Scripting

ethtool : command not found

Hi, I am uising Suse linux on my system and i tried : man ethtool and i got the manual for ethtool but when i tried to use the command as: ethtool -a eth0 it says Command not found. also, i tried rpm -qa|grep ethtool i got: ethtool-3-15.2 so,it means my system has ethtool server or... (4 Replies)
Discussion started by: salil2012
4 Replies

6. Programming

ethtool problem

Hi, I'm using ethtool to change network settings: Just for the experiment, i want to change speed to 10, instead of 100, I type: ethtool -s eth0 speed 10 duplex full autoneg off and to view settings i type: ethtool eth0, and get this: Settings for eth0: Supported ports: ... (4 Replies)
Discussion started by: alex889
4 Replies

7. UNIX for Dummies Questions & Answers

check service is running at boot

dears am having solaris 10, and i would like to know if the NTP service is running when the OS staritng?on the other hand how can i make it start at the boot up?note the ntp is managed by the SMF in solaris 10. thanks a lot (2 Replies)
Discussion started by: thehero
2 Replies

8. Shell Programming and Scripting

Script will keep checking running status of another script and also restart called script at night

I am using blow script :-- #!/bin/bash FIND=$(ps -elf | grep "snmp_trap.sh" | grep -v grep) #check snmp_trap.sh is running or not if then # echo "process found" exit 0; else echo "process not found" exec /home/Ketan_r /snmp_trap.sh 2>&1 & disown -h ... (1 Reply)
Discussion started by: ketanraut
1 Replies

9. Red Hat

Can't boot RHEL7.2 due to "Start Job is Running"

Dear community, as already done tons of times, I prepare the RedHat installation on VMWare, then clone it with clonezilla, and finally restore it on final server. Due to different hrdware, I have to boot from rhel-server-7.4-x86_64-boot.iso cd and rewrite the initramfs that contains the hardware... (3 Replies)
Discussion started by: Lord Spectre
3 Replies

10. UNIX for Beginners Questions & Answers

Ethtool command not working

Hi All, I am trying to find my NIC card speed in centos 5. But i am unable to get the info using ethtool command. # ethtool eth0 Settings for eth0: Link detected: yes and even tried to look for the file # cd /sys/class/net/eth0/speed files which is also not available.... (8 Replies)
Discussion started by: sravani25
8 Replies

LEARN ABOUT PLAN9

ixgb

IXGB(4) 						   BSD Kernel Interfaces Manual 						   IXGB(4)

NAME

     ixgb -- Intel(R) PRO/10GbE Ethernet driver for the FreeBSD operating system

SYNOPSIS

     To compile this driver into the kernel, place the following line in your kernel configuration file:

	   device ixgb

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   if_ixgb_load="YES"

DESCRIPTION

     The ixgb driver provides support for PCI Gigabit Ethernet adapters based on the Intel 82597EX Ethernet controller chips.  The driver supports
     Transmit/Receive checksum offload and Jumbo Frames.

     For questions related to hardware requirements, refer to the documentation supplied with your Intel PRO/10GbE adapter.  All hardware require-
     ments listed apply to use with FreeBSD.

     Support for Jumbo Frames is provided via the interface MTU setting.  Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility
     configures the adapter to receive and transmit Jumbo Frames.  The maximum MTU size for Jumbo Frames is 16114.

     This driver version supports VLANs.  For information on enabling VLANs, see ifconfig(8).

HARDWARE

     The ixgb driver supports the following cards:

     o	 Intel PRO/10GbE LR Server Adapter
     o	 Intel PRO/10GbE SR Server Adapter

DIAGNOSTICS

     ixgb%d: Unable to allocate bus resource: memory  A fatal initialization error has occurred.

     ixgb%d: Unable to allocate bus resource: interrupt  A fatal initialization error has occurred.

     ixgb%d: watchdog timeout -- resetting  The device has stopped responding to the network, or there is a problem with the network connection
     (cable).

SUPPORT

     For general information and support, go to the Intel support website at: http://support.intel.com.

     If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information
     related to the issue to <freebsdnic@mailbox.intel.com>.

SEE ALSO

     arp(4), em(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8)

HISTORY

     The ixgb device driver first appeared in FreeBSD 4.11 and FreeBSD 5.3.

AUTHORS

     The ixgb driver was written by Intel Corporation <freebsdnic@mailbox.intel.com>.

BSD
								  August 18, 2006							       BSD
All times are GMT -4. The time now is 07:24 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy