I want FileB to be growing after each iteration.
After 1 iteration, here is FileB:
Second iteration, i cut column 2 from the newly made fileA into FileB:
And after the third iteration, fileA is again regenerated, i cut column two from it, append to FileB:
etc. etc. My problem is that If i paste the columns, i have to give the file a new name. But I want FileB to maintain the same name, essentially to keep appending and appending to FileB.
Hi,
Can anyone plz share their experience with -
Building shell script to append the file with date in following format-
Filename_MMDDYYYY.txt
Thanks in advance (2 Replies)
Hi Guru's,
I need to create 3 files with the contents "ABC" using single command.
Iam using:
echo "ABC" > file1.txt file2.txt file3.txt
the above command is not working. pls help me...
With Regards / Ganapati (4 Replies)
Hi,
I have already read a lot of posts on sending attachments in unix...but none of them were of help for my problem...so here goes..
i wanna attach a text file and send to a mail id..used the following code :
uuencode "$File1" "$File1" ;|mail -s "$Mail_sub" abc@abc.com
it works... (2 Replies)
HI guys,
I have created a script to read 1 column in a csv file and then place it in text file.
However, when i checked out the text file, it is not in a column format...
Example:
CSV file contains
name,age
aa,11
bb,22
cc,33
After using awk to get first column
TXT file... (1 Reply)
Hi expersts,
in my directory i have *.txt and *.TXT and *.TXT.log, *.txt.log
I want list only .txt and .TXT files in one command...
how to ??
//purple (1 Reply)
I want to add/append the info in the following format to my.txt file.
20130702|abcd20130702.txt FN|SN|DOB
I tried the below script but it throws me some exceptions.
<#!/bin/sh
dt = date '+%y%m%d'members;
echo $dt+|+members+$dt;
/usr/bin/awk -f
BEGIN { FS="|"; OFS="|"; } { print... (6 Replies)
so...
Lets assume I have a text file.
The text file contains multiple "#" symbols.
I want to replace all thos "#"s with a STRING using DOS/Batch
I want to add a certain TEXT to the end of each line.
How can I do this WITHOUT aid of sed, grep or anything linux related ? (1 Reply)
Dear all,
I have a huge txt file (DATA.txt) with the following content . From this txt file, I want the following output using some shell script.
Any help is greatly appreciated.
Greetings,
emily
DATA.txt (snippet of the huge text file)
407202849... (2 Replies)
Hi dears
i have text file like this:
INPUT.txt
001_1_173 j nuh ]az
001_1_174 j ]esma. nuh ]/.xori
.
.
. and have another text
like this
TABLE.txt
j j
nuh word1... (6 Replies)
Hello everyone,
Since my python knowledge is limimted, I've challenged myself to learn as much as possible to help me with my carrere. I'm currently trying to convert a shell script to python, just to give myself a task. There is one section of the script that I'm having issues converting and... (2 Replies)
Discussion started by: da1
2 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)