I just tried the diag boot with RSC card removed, output ends at;
Does the fact that I see output fine up to that point confirm the serial cable setup I'm using is OK? It's a 25-pin to RJ45 adapter, then to USB on my laptop. I'll pursue the null modem cable suggestion.
I'm stuck - when I boot the machine and hit 5 on the keyboard, all I get is an SP login. Can someone give me some tips on how to get to the install via the serial port? (2 Replies)
I have a HP Visualize C200 running hpux that I am trying to boot into using a null modem through com1 from my Sun Ultra 10. I get all the way to the login prompt and then it becomes innactive and wont let me access the machine anymore. Any ideas? (2 Replies)
Hi
I have a stupid problem with ultra 5 console connection.
I can't connect to serial port with my laptop.
I made these configurations from ok prompt:
OK setenv input-device ttya
OK setenv output-device ttya
OK setenv auto-boot? false
I tried to connect to machine with cisco rollover... (5 Replies)
I'm trying to use an old Commodore 128D as a terminal to access OS X's shell via a serial port. I've used 'screen' and 'zterm' to ensure the two machines are successfully interfaced.
Instructions for opening up the serial console on other Unix-y operating systems don't work with OS X Leopard. ... (3 Replies)
Hello Folks,
I am having trouble to login to rsc or serial console of V890.
The rsc2.2.3 has been configured with required parameters, resetrs and even rebooted. When serial port is connected to laptop, The hyper terminal does not get the console or POSt messages when the server is rebooting... (8 Replies)
Hi. I am very very new to Solaris. I found an abandoned Sun Blade 150. I created a 3-wire null modem cable, connected it to an abandoned laptop and successfully installed Solaris 10 using the serial port. This laptop doesn't have ethernet. So I want to establish a PPP connection.
Part of the... (2 Replies)
i am running solaris 10 in my vmware workstation. How to setup a console for my solaris box. in Vmware i could see a serial port option. can some one help me on how i can setup a console . (0 Replies)
Hi Experts.
i have been stuck up with an issue.
i have connected my Solaris 8 , Sun fire V445 on serial port by using Teraterm.
Initially i was able to login and executed some tasks.
After executing some commands (mainly Control +c), i am not able to type any key or not able to do anything at... (2 Replies)
Discussion started by: siddulamadhu
2 Replies
LEARN ABOUT CENTOS
systemd-getty-generator
SYSTEMD-GETTY-GENERATOR(8) systemd-getty-generator SYSTEMD-GETTY-GENERATOR(8)NAME
systemd-getty-generator - Generator for enabling getty instances on the console
SYNOPSIS
/usr/lib/systemd/system-generators/systemd-getty-generator
DESCRIPTION
systemd-getty-generator is a generator that automatically instantiates serial-getty@.service on the kernel console /dev/console if that is
not directed to the virtual console subsystem. It will also instantiate serial-getty@.service instances for virtualizer consoles, if
execution in a virtualized environment is detected. This should ensure that the user is shown a login prompt at the right place, regardless
of which environment the system is started in. For example, it is sufficient to redirect the kernel console with a kernel command line
argument such as console= to get both kernel messages and a getty prompt on a serial TTY. See kernel-parameters.txt[1] for more information
on the console= kernel parameter.
systemd-getty-generator implements the generator specification[2].
Further information about configuration of gettys you may find in systemd for Administrators, Part XVI: Gettys on Serial Consoles (and
Elsewhere)[3].
SEE ALSO systemd(1), agetty(8)NOTES
1. kernel-parameters.txt
https://www.kernel.org/doc/Documentation/kernel-parameters.txt
2. generator specification
http://www.freedesktop.org/wiki/Software/systemd/Generators
3. systemd for Administrators, Part XVI: Gettys on Serial Consoles (and Elsewhere)
http://0pointer.de/blog/projects/serial-console.html
systemd 208SYSTEMD-GETTY-GENERATOR(8)