Well I cannot help you determine what exact physical drive got corrupted; but, I surely can help you figure out which drive in the RAID array is faulty.
I need to upgrade 2 x 73 GB disk and replace with 2 x 146 GB disk in sun v240.
These disks contain boot and swap files
These are mirrored disks with RAID 1
I am trining to create the correct procedure.
So far the procedure I have is as follows:
# metastat
State: Okay
... (5 Replies)
Hi friends,....
am sindhiya,
i have joined as AIX level 1 support.
help me to identify the failed pv in vg which has some 4 physical volumes? (2 Replies)
I found out that the raid 1 was degraded:
# cat /proc/mdstat
Personalities :
md3 : active raid1 sda5 sdb5
1822445428 blocks super 1.0
md2 : active raid1 sda3(F) sdb3
1073741688 blocks super 1.0
md1 : active raid1 sda2 sdb2
524276 blocks super 1.0
md0 : active raid1 sda1... (0 Replies)
I am new to the AIX operating system and am seeking out some advice. We recently have had a drive go bad on our AIX server that is in a RAID 10 array. We have a replacement on the way. I was wondering what the correct steps are to swap out this drive. Does the server need to be powered off? Or can... (5 Replies)
Hi All,
I have a pretty demanding requirement for an SFTP script I have been trying to put together.
I have nearly 100 files (all with the names staring with T_PROD) generated in my local server daily. I need to transfer each of these files to a remote server via SFTP (that's a client... (6 Replies)
Dear All ,
We need to do patching on one Solaris Server , where we have raid 0 configured.
What is the process to patch a Server if RAID 0 (Concat/Stripe) is there.
Below is the sample output.
# metadb
flags first blk block count
a m pc luo 16 ... (1 Reply)
Hi Guys,
I have performed OBP & ALOM upgrade on V240 system. One of my system, running Solaris 10, having issue to identify flash rom during ALOM 1.6.10 version upgrade (OBP upgraded to latest one).
May I know what the reason of this error and how can I fix it so I can upgrade ALOM using... (0 Replies)
Discussion started by: myrpthidesis
0 Replies
LEARN ABOUT CENTOS
ataraid
ATARAID(4) BSD Kernel Interfaces Manual ATARAID(4)NAME
ataraid -- ATA software RAID support
SYNOPSIS
device ata
device ataraid
DESCRIPTION
The ataraid driver provides support for so-called software RAID (sometimes referred to as fake RAID or pseudo RAID).
When a controller that supports software RAID is instructed to create a RAID array, its BIOS writes data structures in a specific metadata
format to the disks. These data structures are picked up by the ataraid driver, so that FreeBSD can work with the array. The ataraid driver
has to understand the specific metadata format of a controller BIOS in order to support its RAID capabilities.
Read-only support for a metadata format means that FreeBSD can use the given RAID array for normal read/write operations. Creation and
rebuild of such arrays has to be done from the controller BIOS.
Read and write support for a metadata format means that FreeBSD can use the given RAID array for normal read/write operations. Additionally,
the atacontrol(8) utility can be used to create, rebuild, update and fail such RAID arrays.
The ataraid driver can read the following metadata formats:
o Adaptec HostRAID
o Highpoint V2 RocketRAID
o Highpoint V3 RocketRAID
o Intel MatrixRAID
o Integrated Technology Express (ITE)
o JMicron
o LSI Logic V2 MegaRAID
o LSI Logic V3 MegaRAID
o NVIDIA MediaShield
o Promise FastTrak
o Silicon Image Medley
o Silicon Integrated Systems (SiS)
o VIA Tech V-RAID
o FreeBSD PseudoRAID
The ataraid driver can write the following metadata formats:
o Highpoint V2 RocketRAID
o Intel MatrixRAID
o JMicron
o Promise FastTrak
o Silicon Integrated Systems (SiS)
o VIA Tech V-RAID
o FreeBSD PseudoRAID
It is also possible to use software RAID on controllers that do not have special software RAID capabilities. See atacontrol(8) for details.
FILES
/dev/ar* ATA RAID device nodes
SEE ALSO ata(4), atacontrol(8)CAVEATS
RAID5 is not supported at this time. Code exists, but it neither uses nor maintains parity information.
AUTHORS
The ataraid driver was written by Soren Schmidt <sos@FreeBSD.org>. This manual page was written by Christian Brueffer
<brueffer@FreeBSD.org>.
BSD February 17, 2006 BSD