AIX doesn't detect smc1 media changer in ts3200 tape library Post: 302562490

10 More Discussions You Might Find Interesting

1. Programming

ldd doesn't work with 64bit .so library on AIX

I generated my shared library in 64bit on AIX, but when I ran ldd, it says: Could not load program libmylib.so: Could not load module libmylib.so. The module has an invalid magic number. Anyone knows how to list library dependencies with 64bit shared library on AIX? If you...

2. AIX

Tape Library on Aix

I am having my 14 Aix 5.3 servers on bladecenters connected with my Tape Library. I had a backup scheduled on tape library but after taking backup successfully, Now, Question 1:- I wanted to restore backup but tape library could not recognize the tape and I get I/O error in TSM. I think it...

3. Shell Programming and Scripting

Why getopts doesn't detect correctly my switches?

Dear all, I have created a KornShell script containing swiches with getopts (command line switches). Normally, my script should work like this: $ ./myscript.ksh -a 12 -b 4 -c 78 The switch a was selected with the argument 12 The switch b was selected with the argument 4 The switch c was...

4. AIX

AIX 5.3 & Veritas Backup with Tape Library

hello, I am facing this problem when trying to prepare AIX 5.3 for Veritas Backup: Veritas Software is not able to communicate properly with our tape library When we tried to run these commands here's the output # cfgmgr -l fscsi0 # cfgmgr -l fscsi2 # cfgmgr -l fscsi1 cfgmgr:...

5. AIX

Boot from TS3200 FC tape library in case of mksysb recovery

Hi all, Is it possible to boot from SMS menu boot devices into TS3200 FC tape library in case of an mksysb recovery on system p550 - 520 power6. please note the library is fibre channel

6. AIX

AIX doesn't detect TS3200 tape library

Hi all, I have a problem here root@host1 / # lsdev -Cc tape rmt0 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP) rmt1 Defined 07-00-02 IBM 3580 Ultrium Tape Drive (FCP) smc0 Defined 07-00-02 IBM 3573 Tape Medium Changer (FCP) root@host1 / # cfgmgr -l fcs2 Method error...

7. AIX

AIX 7.1 don't detect my DataDomain Library

Hi. I have 2 libraries (overland + data domain). My AIX 7.1 detect all "rmt" of the overland but none of the data domain. I have the Atape driver 12.3.9. During cfgmgr, I have this message : cfgmgr: 0514-621 WARNING: The following device packages are required for device support...

8. AIX

CPIO restoration from LTO2 tape media on AIX 4.3.3

Hi, AIXers :) Recently i'm playing around with cpio command, when i try to list out content from LTO2 Tape media using command: #cpio -itvc < /dev/rmt1 it's stopped at particular path 100777 root 1042591 Mar 24 10:09:05 2012 /home/uv/bin/usd and there was an error thrown out: ...

9. AIX

AIX 7.1 cannot discover drives from TS3310 tape library

Good day! Need help in checking my AIX 7.1 box. After we have finished zoning our TS3200 and TS3310 tape libraries, we installed the Atape driver, # lslpp -L |grep tape Atape.driver 11.7.7.0 C F IBM AIX Enhanced Tape and devices.fcp.tape.rte 7.1.3.15 C ...

10. Ubuntu

Ubuntu 16.04 doesn't detect my second monitor

I have Ubuntu 16.04 (dual boot with Windows 10) and a HP Spectre x360 laptop. I have recently bought a Dell Ultrasharp U2515H monitor, which I connect via a Dell docking station. When I plug the docking station to my laptop on Windows, both monitors are detected and everything works fine. ...

LEARN ABOUT DEBIAN

sdl::gfx::imagefilter

pods::SDL::GFX::ImageFilter(3pm)			User Contributed Perl Documentation			  pods::SDL::GFX::ImageFilter(3pm)

NAME

       SDL::GFX::ImageFilter - image filtering functions

CATEGORY

       TODO, GFX

METHODS

   MMX_detect
       int gfx_image_MMX_detect()      CODE:	       SDL_imageFilterMMXdetect();

   MMX_off
       void gfx_image_MMX_off()      CODE:	     SDL_imageFilterMMXoff();

   MMX_on
       void gfx_image_MMX_on()	    CODE:	    SDL_imageFilterMMXon();

   add
       int gfx_image_add(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterAdd(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   mean
       int gfx_image_mean(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMean(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   sub
       int gfx_image_sub(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterSub(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   abs_diff
       int gfx_image_abs_diff(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterAbsDiff(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult
       int gfx_image_mult(Src1, Src2, Dest, length)	 unsigned char *Src1	  unsigned char *Src2	   unsigned char *Dest	    int length
	    CODE:	    RETVAL = SDL_imageFilterMult(Src1, Src2, Dest, length);	 OUTPUT:	   RETVAL

   mult_nor
       int gfx_image_mult_nor(Src1, Src2, Dest, length)      unsigned char *Src1      unsigned char *Src2      unsigned char *Dest	int length
	    CODE:	    RETVAL = SDL_imageFilterMultNor(Src1, Src2, Dest, length);	    OUTPUT:	      RETVAL

   mult_div_by_2
       int gfx_image_mult_div_by_2(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby2(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   mult_div_by_4
       int gfx_image_mult_div_by_4(Src1, Src2, Dest, length)	  unsigned char *Src1	   unsigned char *Src2	    unsigned char *Dest      int
       length	   CODE:	   RETVAL = SDL_imageFilterMultDivby4(Src1, Src2, Dest, length);      OUTPUT:		RETVAL

   bit_and
       int gfx_image_bit_and(Src1, Src2, Dest, length)	    unsigned char *Src1      unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitAnd(Src1, Src2, Dest, length);	   OUTPUT:	     RETVAL

   bit_or
       int gfx_image_bit_or(Src1, Src2, Dest, length)	   unsigned char *Src1	    unsigned char *Src2      unsigned char *Dest      int length
	    CODE:	    RETVAL = SDL_imageFilterBitOr(Src1, Src2, Dest, length);	  OUTPUT:	    RETVAL

   div
       int gfx_image_div(Src1, Src2, Dest, length)	unsigned char *Src1	 unsigned char *Src2	  unsigned char *Dest	   int length
	    CODE:	    RETVAL = SDL_imageFilterDiv(Src1, Src2, Dest, length);	OUTPUT: 	  RETVAL

   bit_negation
       int gfx_image_bit_negation(Src1, Dest, length)	   unsigned char *Src1	    unsigned char *Dest      int length      CODE:
		 RETVAL = SDL_imageFilterBitNegation(Src1, Dest, length);      OUTPUT:		 RETVAL

   add_byte
       int gfx_image_add_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterAddByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_uint
       int gfx_image_add_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterAddUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   add_byte_to_half
       int gfx_image_add_byte_to_half(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       C      CODE:	      RETVAL = SDL_imageFilterAddByteToHalf(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_byte
       int gfx_image_sub_byte(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterSubByte(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   sub_uint
       int gfx_image_sub_uint(Src1, Dest, length, C)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned int C
	    CODE:	    RETVAL = SDL_imageFilterSubUint(Src1, Dest, length, C);	 OUTPUT:	   RETVAL

   shift_right
       int gfx_image_shift_right(Src1, Dest, length, N)      unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftRight(Src1, Dest, length, N);	    OUTPUT:	      RETVAL

   shift_right_uint
       int gfx_image_shift_right_uint(Src1, Dest, length, N)	  unsigned char *Src1	   unsigned char *Dest	    int length	    unsigned char
       N      CODE:	      RETVAL = SDL_imageFilterShiftRightUint(Src1, Dest, length, N);	  OUTPUT:	    RETVAL

   mult_by_byte
       int gfx_image_mult_by_byte(Src1, Dest, length, C)      unsigned char *Src1      unsigned char *Dest	int length	unsigned char C
	    CODE:	    RETVAL = SDL_imageFilterMultByByte(Src1, Dest, length, C);	    OUTPUT:	      RETVAL

   shift_right_and_mult_by_byte
       int gfx_image_shift_right_and_mult_by_byte(Src1, Dest, length, N, C)	 unsigned char *Src1	  unsigned char *Dest	   int length
	    unsigned char N	 unsigned char C      CODE:	      RETVAL = SDL_imageFilterShiftRightAndMultByByte(Src1, Dest, length, N, C);
	    OUTPUT:	      RETVAL

   shift_left_byte
       int gfx_image_shift_left_byte(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftByte(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left_uint
       int gfx_image_shift_left_uint(Src1, Dest, length, N)	 unsigned char *Src1	  unsigned char *Dest	   int length	   unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeftUint(Src1, Dest, length, N);      OUTPUT:		 RETVAL

   shift_left
       int gfx_image_shift_left(Src1, Dest, length, N)	    unsigned char *Src1      unsigned char *Dest      int length      unsigned char N
	    CODE:	    RETVAL = SDL_imageFilterShiftLeft(Src1, Dest, length, N);	   OUTPUT:	     RETVAL

   binarize_using_threshold
       int gfx_image_binarize_using_threshold(Src1, Dest, length, T)	  unsigned char *Src1	   unsigned char *Dest	    int length
	    unsigned char T	 CODE:		 RETVAL = SDL_imageFilterBinarizeUsingThreshold(Src1, Dest, length, T);      OUTPUT:
		 RETVAL

   clip_to_range
       int gfx_image_clip_to_range(Src1, Dest, length, Tmin, Tmax)	unsigned char *Src1	 unsigned char *Dest	  int length	  unsigned
       char Tmin      unsigned char Tmax      CODE:	      RETVAL = SDL_imageFilterClipToRange(Src1, Dest, length, Tmin, Tmax);	OUTPUT:
		 RETVAL

   normalize_linear
       int gfx_image_normalize_linear(Src1, Dest, length, Cmin, Cmax, Nmin, Nmax)      unsigned char *Src1	unsigned char *Dest	 int
       length	   int Cmin	 int Cmax      int Nmin      int Nmax	   CODE:	   RETVAL = SDL_imageFilterNormalizeLinear(Src1, Dest,
       length, Cmin, Cmax, Nmin, Nmax);      OUTPUT:	       RETVAL

   convolve_kernel_3x3_divide
       int gfx_image_convolve_kernel_3x3_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel3x3Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_divide
       int gfx_image_convolve_kernel_5x5_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel5x5Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_divide
       int gfx_image_convolve_kernel_7x7_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel7x7Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_divide
       int gfx_image_convolve_kernel_9x9_divide(Src, Dest, rows, columns, Kernel, Divisor)	unsigned char *Src	unsigned char *Dest
	    int rows	  int columns	   Sint16 *Kernel      unsigned char Divisor	  CODE: 	  RETVAL =
       SDL_imageFilterConvolveKernel9x9Divide(Src, Dest, rows, columns, Kernel, Divisor);      OUTPUT:		 RETVAL

   convolve_kernel_3x3_shift_right
       int gfx_image_convolve_kernel_3x3_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel3x3ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_5x5_shift_right
       int gfx_image_convolve_kernel_5x5_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel5x5ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_7x7_shift_right
       int gfx_image_convolve_kernel_7x7_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel7x7ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   convolve_kernel_9x9_shift_right
       int gfx_image_convolve_kernel_9x9_shift_right(Src, Dest, rows, columns, Kernel, NRightShift)	 unsigned char *Src	 unsigned char
       *Dest	  int rows	int columns	 Sint16 *Kernel      unsigned char NRightShift	    CODE:	    RETVAL =
       SDL_imageFilterConvolveKernel9x9ShiftRight(Src, Dest, rows, columns, Kernel, NRightShift);      OUTPUT:		 RETVAL

   sobel_x
       int gfx_image_sobel_x(Src, Dest, rows, columns)	    unsigned char *Src	    unsigned char *Dest      int rows	   int columns	    CODE:
		 RETVAL = SDL_imageFilterSobelX(Src, Dest, rows, columns);	OUTPUT: 	  RETVAL

   sobel_x_shift_right
       int gfx_image_sobel_x_shift_right(Src, Dest, rows, columns, NRightShift)      unsigned char *Src      unsigned char *Dest      int rows
	    int columns      unsigned char NRightShift	    CODE:	    RETVAL = SDL_imageFilterSobelXShiftRight(Src, Dest, rows, columns,
       NRightShift);	  OUTPUT:	    RETVAL

   align_stack
       void gfx_image_align_stack()	 CODE:		 SDL_imageFilterAlignStack();

   restore_stack
       void gfx_image_restore_stack()	   CODE:	   SDL_imageFilterRestoreStack();

AUTHORS

       See "AUTHORS" in SDL.

perl v5.14.2							    2012-05-28					  pods::SDL::GFX::ImageFilter(3pm)