09-26-2011
Hi steve_b72, if you have done configuration changes of firmware updates, perhaps you have a configuration problem, but I'm afraid that you have a machine with a hardware error.
This User Gave Thanks to hombreopaco For This Post:
10 More Discussions You Might Find Interesting
1. Solaris
Hello, I'm trying to fix this server System Board (CPU/Memory Unit). The error indicates that its missing 3.3VDC. So far all the fuses and caps have been checked. I new at this type of machine, need help for idea on this system. Thank you in advance.
Vu (0 Replies)
Discussion started by: vhtran
0 Replies
2. Solaris
Hi all ,
I am trying to install solaris 9 on E2900 that is connect to a 3320 SCSI storage , The issue is that i want to have the SCSI disks(3320) to start with controllers 1 and 2 ( c1t0 ....c2t0) and my 2 local disks on c3 and c4 .
Is there a way that i could accomplish that ...
Thanks... (3 Replies)
Discussion started by: ppass
3 Replies
3. Hardware
Hi all,
I've got an issue with my PC and was wondering what you thought might be the issue.
The problem manifests it'self in two ways (at least I'm assuming it's related).
1. I turn the power on at the wall and press the on button, but nothing happens. I have to wait for several seconds to... (3 Replies)
Discussion started by: DougyC
3 Replies
4. UNIX for Advanced & Expert Users
hii everyone,
i am handling data center,so most of the time i have to check hardware issue.So i came to the conclusion that try something automatic.
so the thing is that when any hardware issue come to the server it send a automatic mail to my mail server like hotmail.com
And i will... (1 Reply)
Discussion started by: vipinkumarr89
1 Replies
5. Emergency UNIX and Linux Support
Hi,
I have a scheduled activity to reboot E2900 server. But suddenly I came to know that console ip is not pinging, not connecting via telnet, as it used to connect. I already checked with my onsite person and he changed cable, still no luck. Network person checked his switch, which is showing... (8 Replies)
Discussion started by: solaris_1977
8 Replies
6. Solaris
What would you think is a reasonable useful lifespan for a Sunfire e2900. I'm not referring to it's performance capabilities as much as I'm referring to the hardware's ability to perform reliably. (2 Replies)
Discussion started by: DustinT
2 Replies
7. Solaris
While trying to perform a firmware upgrade on this ilom, the system refused to allow uploading of more than ~900k or so... We tried multiple approaches using FTP and all failed. I decided to start this morning by firing up Apache on another box and trying the same process via HTTP but when I went... (8 Replies)
Discussion started by: DustinT
8 Replies
8. Solaris
several newbie questions:
> how-to find serialnumber for Sun E2900
prtdiag -v does not show chassis serial number
> LOM is not connectable .
Are there any tools to get automatically Serial numbers for HW.
Thanks ! (7 Replies)
Discussion started by: magedfawzy
7 Replies
9. Solaris
Hi
we have A sun4v SPARC Enterprise T2000
It has started to go down frequently without producing any corefiles.
There is nothing in the logs to induicate any issues.
So I'm trying to remotely check this and get to see if there are any hardware issue. I heard about ALOm and I think this is... (4 Replies)
Discussion started by: mnassiri
4 Replies
10. UNIX for Beginners Questions & Answers
Hello All,
OS: openSUSE 13.1 (Bottle) (armv7hl)
PC: CuBox-i (*mini-pc)
The PC in question is a CuBox-i mini-pc. Since this PC doesn't have a battery, everytime the PC reboots the hardware clock is reset back to the same date every time, which is "2014-07-08 00:00".
I have NTP configured... (5 Replies)
Discussion started by: mrm5102
5 Replies
LEARN ABOUT SUNOS
raidctl
raidctl(1M) System Administration Commands raidctl(1M)
NAME
raidctl - RAID hardware utility
SYNOPSIS
raidctl -c disk1 disk2
raidctl -d disk1
raidctl [-f] -F filename controller...
raidctl -l [controller...]
DESCRIPTION
The raidctl utility creates, deletes, or displays RAID volumes of the LSI1030 HW Raid controllers that include RAID support. The utility
also updates firmware/fcode/BIOS for both RAID and non-RAID controllers.
The raidctl utility requires privileges that are controlled by the underlying file-system permissions. Only privileged users can manipulate
the RAID system configuration. If a non-privileged user attempts to create or delete a RAID volume, the command fails with EPERM.
Without options, raidctl displays the current RAID configuration on all exisiting controllers.
OPTIONS
The following options are supported:
-c disk1 disk2 (for on board)
Create a mirror using disk1 and disk2. Replace the contents of disk2 with the contents of disk1. Specify disk1 and disk2 in canonical
form, for example, c0t0d0.
When you create a a RAID volume, the RAID volume assumes the identity of the first target in the disk pair (disk1). The second target
(disk2) disappears from the system. Therefore, the RAID volume appears as one disk.
To have a successful RAID creation, there must not already be a RAID configuration present on the specified controller. Additionally,
the secondary disk must not be mounted, as it has all its data erased and replaced with the primary disk's data.
-d disk1 (for on board)
Delete the RAID volume specified as disk1.
Specify disk1 in canonical form, for example, c0t0d0.
-f (for HBA)
Force an update. Do not prompt.
-F filename controller (for HBA)
Update the firmware running on the specified controller (controller).
-l [controller ...] (for on board)
List the system's RAID configuration. If controller is specified, list RAID configurations for controller.
Output from the -l lists the following information:
RAID Volume Displays logical RAID volume name.
RAID Status Displays RAID status as either RESYNCING (disks are syncing), DEGRADED RAID is operating with reduced functionality),
OK (operating optimally), or FAILED (non-functional).
RAID Disk Displays RAID disk name.
Disk Status Displays disk status as either OK or FAILED.
EXAMPLES
Example 1: Creating the RAID Configuration
The following command creates the RAID configuration:
# raidctl -c c0t0d0 c0t1d0
RAID Volume 'c0t0d0' created
Example 2: Displaying the RAID Configuration
The following command displays the RAID configuration:
# raidctl
RAID RAID RAID Disk
Volume Status Disk Status
----------------------------------------
c0t0d0 RESYNCING c0t0d0 OK
c0t1d0 OK
Example 3: Deleting the RAID Configuration
The following command deletes the RAID configuration:
# raidctl -d c0t0d0
RAID Volume 'c0t0d0' deleted
Example 4: Updating Flash Images on the Controller
The following command updates flash images on the controller:
# raidctl -F lsi1030.fw 0
Update flash image on controller 0? (y/N): y
Flash updated successfully
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 Invalid command line input.
2 Request operation failed.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
attributes(5)
System Administration Guide: Basic Administration
SunOS 5.10 17 Aug 2004 raidctl(1M)