prtdiag output for Solaris on Fujitsu hardware shows vendor as Sun Microsystems Post: 302557399

Sponsored Content

Operating Systems Solaris prtdiag output for Solaris on Fujitsu hardware shows vendor as Sun Microsystems Post 302557399 by chattygk on Wednesday 21st of September 2011 05:57:48 AM

09-21-2011

Registered User

prtdiag output for Solaris on Fujitsu hardware shows vendor as Sun Microsystems

Hello,

I was under the impression that the Header of the prtdiag output shows the hardware vendor information in the section between System Configuration and sun4u/sun4us. But on some Solaris machines which are running on Fujitsu hardware, the vendor is shown as Sun Microsystems in this command's output header. Excerpt of the command output follows -

Code:

System Configuration:  Sun Microsystems  sun4us Fujitsu PRIMEPOWER250 1x SPARC64 V
System clock frequency: 220 MHz
Memory size: 1024 Megabytes

Is there any single reliable way to get the correct hardware vendor information on Solaris machines? Can you please also post some examples if possible?

Appreciate any help on this.

Thanks.

Last edited by pludi; 09-21-2011 at 10:20 AM..

chattygk

View Public Profile for chattygk

Find all posts by chattygk

4 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sun Solaris "prtdiag -v" on redhat

Does anyone know of a command or list of commands that shows the same amount of detail as prtdiag -v for redhat linux?

2. Solaris

regarding sun solaris hardware

hi :), i am new to this forum and i am in need of some help. one of my friend i having a Sun Ultra 2 UPA/Sbus (UltraSPARC-II 296Mhz) 640 MB ram. i am not sure if that configuration will be helpful to try out some sysadmin commands. this machine has a 21-inch monster monitor, which i think...

3. Solaris

Oracle Agrees to Acquire Sun Microsystems

Source: NY Times Oracle Agrees to Acquire Sun Microsystems By ASHLEE VANCE The Oracle Corporation, the technology information company, announced Monday that it would acquire a rival, Sun Microsystems, for $9.50 a share, or about $7.4 billion. The agreement with Oracle came about two weeks...

4. Solaris

Solaris 9 Zone : Date command in crontab shows delayed(One Hour) output

SOLARIS 9 Zone : date command in crontab shows delayed(One Hour) output Hi folks, the date command shows the correct date and time, How ever, if the date command executed through crontab in any form of scrip the output shows as one hour delayed, similar to date -u.. Can some one help in...

LEARN ABOUT DEBIAN

prtdiag

prtdiag(1M)															       prtdiag(1M)

NAME

       prtdiag - display system diagnostic information

SYNOPSIS

       /usr/sbin/prtdiag [-v] [-l]

       prtdiag displays system configuration and diagnostic information on sun4u and sun4v systems.

       The diagnostic information lists any failed field replaceable units (FRUs) in the system.

       The interface, output, and location in the directory hierarchy for prtdiag are uncommitted and subject to change in future releases.

       prtdiag	does  not  display  diagnostic	information  and  environmental  status  when executed on the Sun Enterprise 10000 server. See the
       /var/opt/SUNWssp/adm/${SUNW_HOSTNAME}/messages file on the system service processor (SSP) to obtain such information for this server.

       The following options are supported:

       -l	Log output. If failures or errors exist in the system, output this information to syslogd(1M) only.

       -v	Verbose mode. Displays the time of the most recent AC Power failure, and the most recent hardware fatal error information, and (if
		applicable) environmental status. The hardware fatal error information is useful to repair and manufacturing for detailed diagnos-
		tics of FRUs.

       The following exit values are returned:

       0	No failures or errors are detected in the system.

       1	Failures or errors are detected in the system.

       2	An internal prtdiag error occurred, for example, out of memory.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWkvm			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Unstable* 		   |
       +-----------------------------+-----------------------------+

       *The output is unstable.

       modinfo(1M), prtconf(1M), psrinfo(1M), sysdef(1M), syslogd(1M), attributes(5), openprom(7D)

NOTES

       Not all diagnostic and system information is available on every Solaris platforn, and therefore cannot be displayed by  prtdiag.  On  those
       platforms, further information can be obtained from the System Controller.

								    29 Aug 2005 						       prtdiag(1M)