Hi I have a working expect script below. The script continues to log cisco router configurations until all the ip addresses in the "routerlist1" has been read. Problem will start to happen when one of the ip address is not reacheable via ssh or telnet. The script will stop to read the rest of the ip addresses in the "routerlist1". Is there a command to make this script continue even one of the ip is not reacheable?
Thanks....
Code:
#!/usr/bin/expect -f
set logpath "/var/log/Router-conf"
set routerlistname "/var/log/Router-conf/routerlist1"
set datestring [exec date +%Y%m%d]
set password "mypassword"
set ciscohost "dummy_data"
set datestring [exec date +%d%m%Y]
set timestring [exec date +%H%M%S]
set timeout 3
if {!([file exists $logpath/cisco.$datestring])} then {
set MakeDir [exec mkdir $logpath/cisco.$datestring]}
set hostlist [open $routerlistname r]
while {[gets $hostlist ciscohost] > 0} {
###################################################
spawn ssh cisco@$ciscohost
expect {
"Connection refused"
{
spawn telnet $ciscohost
} }
expect {
"User Access Verification"
{ send "cisco\r"
} }
###################################################
expect {
"RSA key fingerprint"
{ send "yes\r"
} }
expect {
"assword:"
{ send "$password\r"
} }
expect {
">"
{ send "enable\r"
} }
expect {
"assword:"
{ send "$password\r"
} }
expect {
"#"
{ send "terminal length 0\r"
} }
set logfile "$logpath/cisco.$datestring/$ciscohost.$datestring.$timestring.conf"
log_file -noappend $logfile
expect {
"#"
{ send "show run\r"
} }
expect {
"ntp server"
{ send "exit\r" } }
log_file
}
close $hostlist
I am trying to write an expect script for remote server login. At some point of time I need to telnet based on the output of grep command. Based on the output I need to select the ip address of the server. How can I write an expect script for the same. The output of the grep command is as follows:... (1 Reply)
Hi experts,
I am trying to develop a script using Expect. I am stuck somewhere. I need ur help guys.
I have sun solaris where i need to input the following commands-
bash-2.05$ telnet 11.13.58.39 2310
Trying 0.0.0.0...
Connected to ..
Escape character is '^]'.
CONNECTING TO...
... (3 Replies)
Hello to all...this is my first post (so please go easy). :)
I feel pretty solid at expect scripting, but I'm running into an issue that I'm not able to wrap my head around. I wrote a script that is a little advanced for logging into a remote Linux machine and changing text in a file using sed.... (2 Replies)
Hi,
I am new to expect scripting and need your help in the following task.
I want an expect script to take the commands from an input file and then execute the commands and give the command execution output in an otput file.
The command execution part is normal and I did it via script by... (2 Replies)
I am trying to write an expect script which will read information from a file that contains username and password, and change the password for each user accordingly. The list contains around 100 users. I am new to both Solaris and expect. I have successfully been able to set the first user's... (9 Replies)
Hi All,
I am trying to connect a router using Expect scripting. But my script shows error.One more thing after the command telnet localhost 2000
we should press ENTER KEY once before the command prompt asks for "enable" and password.Please help correctiong my script.
#!/usr/bin/expect --
... (2 Replies)
Hi All,
I am suppose to capature the value command `show ip route` of a router in a Expect script. But i am not able to catch the value in a variable or a file in the following Expect script.
#!/usr/bin/expect -f
set input
spawn telnet localhost $argv
expect "Escape character is '^]'."... (5 Replies)
Hello,
I tried to use expect to catch information from my nagios and send me a call but i have nothing when i execute the script :
0 - add : account SIP
1 - trext : information from nagios
text2wav : conversion text to wav ( text to speech )
pjsua : connection thru the SIP
... (0 Replies)
I was wondering if I could do this a bit better.
another script calls this script and logs into a device, does the relavant "show commands" and then saves those to a file.
My problem is that the buffer isn't large enough to the output of some of the commands.
here is an excerpt of what i'm... (0 Replies)
Hi
I am new to IP configuration and using expect script
I have a requirement like
I need to write a expect script that can ssh to a remote machine(linux1) using password which already has IP, once logged inside machine need to reboot remote machine(linux1) and again login to same remote... (1 Reply)
Discussion started by: Priya Amaresh
1 Replies
LEARN ABOUT DEBIAN
bb-services
BB-SERVICES(5) File Formats Manual BB-SERVICES(5)NAME
bb-services - Configuration of TCP network services
SYNOPSIS
$BBHOME/etc/bb-services
DESCRIPTION
bb-services contains definitions of how bbtest-net(1) should test a TCP-based network service (i.e. all common network services except HTTP
and DNS). For each service, a simple dialogue can be defined to check that the service is functioning normally, and optional flags deter-
mine if the service has e.g. a banner or requires SSL- or telnet-style handshaking to be tested.
FILE FORMAT
bb-services is a text file. A simple service definition for the SMTP service would be this:
[smtp]
send "mail
quit
"
expect "220"
options banner
This defines a service called "smtp". When the connection is first established, bbtest-net will send the string "mail
quit
" to the
service. It will then expect a response beginning with "220". Any data returned by the service (a so-called "banner") will be recorded and
included in the status message.
The full set of commands available for the bb-services file are:
[NAME] Define the name of the TCP service, which will also be the column-name in the resulting display on the test status. If multiple
tests share a common definition (e.g. ssh, ssh1 and ssh2 are tested identically), you may list these in a single "[ssh|ssh1|ssh2]"
definition, separating each service-name with a pipe-sign.
send STRING
expect STRING
Defines the strings to send to the service after a connection is established, and the response that is expected. Either of these may
be omitted, in which case bbtest-net(1) will simply not send any data, or match a response against anything.
The send- and expect-strings use standard escaping for non-printable characters. "
" represents a carriage-return (ASCII 13), "
"
represents a line-feed (ASCII 10), " " represents a TAB (ASCII 8). Binary data is input as "xNN" with NN being the hexadecimal
value of the byte.
port NUMBER
Define the default TCP port-number for this service. If no portnumber is defined, bbtest-net(1) will attempt to lookup the portnum-
ber in the standard /etc/services file.
options option1[,option2][,option3]
Defines test options. The possible options are
banner - include received data in the status message
ssl - service uses SSL so perform an SSL handshake
telnet - service is telnet, so exchange telnet options
FILES
$BBHOME/etc/bb-services
SEE ALSO bbtest-net(1)Xymon Version 4.2.3: 4 Feb 2009 BB-SERVICES(5)
09-21-2011
