I'm extremely green when it comes to Bash and Unix scripting, however I understand the language and flows but being so green to Linux i don't know the commands.
what i need to do is make an IF statement as follows:
so far I've figured out that i can use the following command to get the HW serial #:
however i don't know how to set the output of this command as a variable.
This isn't really a unix question, or even a programming question, but I hope you guys can help. I want to create a program to control the electricity on a model railway.
I have created the program to that it sends characters over the serial cable, but now I need to do the switch that will... (1 Reply)
Here's my config: One quadra 840av working under netBSD and successfully connected to my network. One PM 6100 connected but not booting fully into netBSD (i realize this is faulty but I figured it was worth a shot to try and install netBSD/mac68k on it due to the fact it is unsupported under the... (1 Reply)
Hi everyone,
What is the difference between console-based and Xwindow-based application?
Can I say the application working well in Xwindows can work in console?
Can I say the application working well in console cann't work in Xwindow perhaps.
Eg, ncurses is console-based and Imlib2 is... (4 Replies)
Hello!
I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a... (5 Replies)
I have a file which will have rows like shown below,
ST*820*316054716
RMR*IV*11333331009*PO*40.31
REF*IV*22234441009*xsss471-2762
DTM*003*091016
ENT*000006
RMR*IV*2222234444*PO*239.91
REF*IV*1234445451009*LJhjlkhkj471-2762 </SPAN>
DTM*003*
091016
RMR*IV*2223344441009*PO*40.31... (18 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
I am looking to make the switch from a Windows based network to a Linux (preferably Ubuntu, because I used it the most) based one. Currently the network includes a Windows 2003 server which acts as a domain controller and file server, a network shared printer (Canon 2300N) and 7 clients running... (2 Replies)
Hi,
This is my first post here.
I would like to ask: how to connect the barcode scanner to the serial port?
What are the names in the system (in / dev) and serialport1 serialport0?
Please help with this.
Regards. (2 Replies)
Hi
I would like to know whether we can configure link based IPMP in private connectivity in Oracle RAC
Regarsd
---------- Post updated at 04:35 PM ---------- Previous update was at 04:27 PM ----------
Here I am taking about in case of private connectivity through cross cable (6 Replies)
Below is the sample logfile:
Userids Date Time
acb Checkout time: 2013-11-20 17:00
axy Checkout time: 2013-11-22 12:00
der Checkout time: 2013-11-17 17:00
xyz Checkout time: 2013-11-19 16:00
ddd Checkout time: 2013-11-21 16:00
aaa Checkout... (9 Replies)
Discussion started by: asjaiswal
9 Replies
LEARN ABOUT CENTOS
ipmish
openipmish(1) Shell interface to an IPMI system openipmish(1)NAME
openipmish - Shell interface to an IPMI system
SYNOPSIS
openipmish [option]
DESCRIPTION
The openipmish is a command interpreter that gives the full power of the OpenIPMI library to a user-level command language. It is designed
so it can easily be driven with a scripting language like TCL, it has well-formed output.
openipmish starts up with no connections or anything of that nature. You must enter commands to make connections to domains.
OPTIONS --dmsg Turn on message debugging, this will dump all messages to debug log output.
--drawmsg
Turn on raw message debugging, this will dump all low-level messages to debug log output. This differs from normal message debug-
ging in that all protocol messages are also dumped, not just IPMI messages.
--dmem Turn on memory debugging, this will cause memory allocation and deallocations to be checked. When the program terminates, it will
dump all memory that was not properly freed (leaked).
--dmsgerr
Turn on printing out low-level message errors.
--dlock
Turn on lock debugging, this will check lock operations to make sure that locks are help in all the proper places and make sure that
locks are properly nested.
-x <string>, --execute <string>
Execute the given string at startup. This may be entered multiple times for multiple commands.
--glib Use glib for the OS handler.
--snmp Enable the SNMP trap handler. openipmish must be compiled with SNMP code enabled for this option to be available.
--help Help output
COMMANDS
openipmish follows the standard command syntax defined in ipmi_cmdlang(7). See that for the details on most commands. The IPMI manual
that comes with OpenIPMI will also be quite handy.
openipmish defines some commands that are not in the standard command language. These are:
read Read and execute commands from the given file.
exit Quit
redisp_cmd on|off
Normally, openipmish redisplays the command line when an event comes in. This is nice for interactive use, but bad for scripting.
This lets you turn that function on and off.
SEE ALSO ipmi_cmdlang(7), ipmi_ui(1)KNOWN PROBLEMS
None
AUTHOR
Corey Minyard <cminyard@mvista.org>
OpenIPMI 05/13/03 openipmish(1)