Hello hello, did a quick search and didn't turn up anything helpful. I've got a book I'm sure has the answers, but I don't think I'll have time to finish it before this all has to work, so here goes~ if this isn't a good place to post and someone could direct me to another forum I'd appreciate... (1 Reply)
Hi all,
I'm trying to run the sipp simulator in crontab but after some attempt I came to the conclusion that for some reason this isn't possible (maybe due to sipp interactive nature).
This is confirmed by these posts.
Now I'm trying to launch sipp from an expect script that runs in crontab.
... (0 Replies)
Hi,
i am launching a script which open a ssh connexion to a cluster's node. Once on the node, the script calls the problematic command head and wc.
I receive a message error as follow which come from two different scripts :
line 31: head: command not found
line 18: wc: command not found
... (6 Replies)
Can 'spawn' script be used more than once in a given expect script ??
What I'm trying to do is, first log-into a remote server through one 'ssh' spawn com and then from there log-into another server using a secod 'ssh' spawn command. But this approach is not working... the second ssh attempt... (1 Reply)
Hi all,
I want to connect to some host with "ssh". I have googled and got some commands of "expect" and "spawn". I was not aware of these commands and tried below script.
$ cat auto.sh
set host xx.xx.xx.xx
set password abcd@1234
set user root
spawn ssh $user@$host
expect "*?assword:*"... (4 Replies)
I am running the export command within a view to use that value inside my build script. But while executing it it is saying "export command not found"
My code is as follows:
--------------------------
#!/bin/sh
user="test"
DIR="/bldtmp/"$user
VIEW="test.view1"
echo "TMPDIR before export... (4 Replies)
hii,,
I am trying to automate jira. during my scripting using bash script, in the terminal i got the terminal message like this:
"Configure which ports JIRA will use.
JIRA requires two TCP ports that are not being used by any other
applications on this machine. The HTTP port is where you... (1 Reply)
Hello All,
I have an Expect Script that ssh'es to a server and does some stuff.
In Expect there is a built-in Array Variable called "expect_out(buffer)" which contains all the output from the previous send command up until the expected output.
I want to pass the array "expect_out(buffer)" to... (2 Replies)
Running bash in cygwin under 2003 Server. I run about 6 shell windows. Every now and then when I check the machine, all of the scripts are scrolling and returning /usr/bin/whatever: command not found.
I checked the event log for a windows event that would cause it, but there was nothing. I... (9 Replies)
I'm fairly new to scripting so this might not be possible.
I am using Expect with Cisco switches and need to capture the string after finding the expect request. For example, when I issue "show version" on a Nexus switch, I'm looking to capture the current firmware version:
#show version
... (0 Replies)
Discussion started by: IBGaryA
0 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)