09-14-2011
still not running
cat /proc/mdstat
Personalities : [raid10]
unused devices: <none>
mdadm --assemble -v /dev/md126 /dev/sdb /dev/sdc /dev/sdd /dev/sde --run
mdadm: looking for devices for /dev/md126
mdadm: /dev/sdb is identified as a member of /dev/md126, slot -1.
mdadm: /dev/sdc is identified as a member of /dev/md126, slot -1.
mdadm: /dev/sdd is identified as a member of /dev/md126, slot -1.
mdadm: /dev/sde is identified as a member of /dev/md126, slot -1.
mdadm: added /dev/sdc to /dev/md126 as -1
mdadm: added /dev/sdd to /dev/md126 as -1
mdadm: added /dev/sde to /dev/md126 as -1
mdadm: added /dev/sdb to /dev/md126 as -1
mdadm: Container /dev/md126 has been assembled with 4 drives
cat /proc/mdstat
Personalities : [raid10]
md126 : inactive sdb[3](S) sde[2](S) sdd[1](S) sdc[0](S)
9028 blocks super external:imsm
8 More Discussions You Might Find Interesting
1. Linux
Hi,
I have a three disk raid 5, with 500GB disks.
This is close to being full, and whilst I can just add another disk and rebuild to add another 500GB, I would prefer to replace with 1TB disks. So i have some questions.
Can I replace these disks one by one with bigger disks? I... (1 Reply)
Discussion started by: snoop2048
1 Replies
2. Virtualization and Cloud Computing
Hello Unix Community:
My task to figure out how to add a 20G volume to an existing EBS Array (RAID0) at AWS.
I haven't been told that growing the existing volumes isn't an option, or adding another larger volume to the existing array is the way to go. The client's existing data-store is... (0 Replies)
Discussion started by: Habitual
0 Replies
3. Emergency UNIX and Linux Support
Hi All
I have a RAID 5 array consisting of 4 drives that had a partial drive failure in one of the drives.
Rebooting shows the faulty drive as background rebuilding and mdadm /dev/ARRAYID shows three drives as in sync with the fourth drive as spare rebuilding.
However the array won't come... (9 Replies)
Discussion started by: Bashingaway
9 Replies
4. UNIX for Advanced & Expert Users
Hi everyone,
I am not sure if I understand how mdadm --create /dev/md0 --level=container works?
A device called /dev/md0 appears in /proc/mdstat but I am not sure how to use that device?
I have 2 blank drives with 1 500GB partition on each. I would like to setup mirroring, but not in the... (0 Replies)
Discussion started by: hytron
0 Replies
5. Red Hat
had this RHEL 5 installation with /dev/sda1 and /dev/sda2 running..
created two more partitions /dev/sdj1 and /dev/sdj2 , the same sized partition as /dev/sda
trying to use mdadm to create RAID1 ..
I cannot even do it in "rescue" mode, I wonder if it can be done..
it kept... (2 Replies)
Discussion started by: ppchu99
2 Replies
6. UNIX for Advanced & Expert Users
Hi All,
I have been trying to create a USB RAID 5 using mdadm tool on Joli OS 1.2 (Ubuntu) but with no luck. I cannot even get pass the creation of array device (/dev/md0) and superblock. I am using 3 USB keys (2 16.4 GB kingston and 1 16GB sandisk).
My steps are:
... (5 Replies)
Discussion started by: powelltallen
5 Replies
7. Filesystems, Disks and Memory
Hello,
i have a system with 6 sata3 seagate st3000dm01 disks running on stable Debian with software raid mdadm. i have md0 for root and md1 for swap and md2 for the files. i now want to add one more disk = sdh4 for md2 but i got this errors:
The new disk is connected to an 4 port sata... (7 Replies)
Discussion started by: Sunghost
7 Replies
8. UNIX for Advanced & Expert Users
Hi guys,
I'm new to RAID although I've had a server running raid5 for a while. It was delivered preinstalled like this and I never really wondered how to monitor and maintain it. This quick introduction just to let you understand why I'm such an idiot asking such a silly question.
Now what... (0 Replies)
Discussion started by: chebarbudo
0 Replies
LEARN ABOUT SUNOS
sock2path
sock2path(4) File Formats sock2path(4)
NAME
sock2path - file that maps sockets to transport providers
SYNOPSIS
/etc/sock2path
DESCRIPTION
The socket mapping file, /etc/sock2path, is a system file that contains the mappings between the socket(3SOCKET) call parameters and the
transport provider driver. Its format is described on the soconfig(1M) manual page.
The init(1M) utility uses the soconfig utility with the sock2path file during the booting sequence.
EXAMPLES
Example 1: A Sample sock2path File
The following is a sample sock2path file:
# Family Type Protocol Path
2 2 0 /dev/tcp
2 2 6 /dev/tcp
26 2 0 /dev/tcp6
26 2 6 /dev/tcp6
2 1 0 /dev/udp
2 1 17 /dev/udp
26 1 0 /dev/udp6
26 1 17 /dev/udp6
1 2 0 /dev/ticotsord
1 6 0 /dev/ticotsord
1 1 0 /dev/ticlts
2 4 0 /dev/rawip
26 4 0 /dev/rawip6
24 4 0 /dev/rts
27 4 2 /dev/keysock
SEE ALSO
soconfig(1M), socket(3SOCKET)
Network Interfaces Programmer's Guide
SunOS 5.10 10 Nov 1999 sock2path(4)