Solaris 10 c0t0d0p0 Vs. c0t0d0s0 Post: 302554260

5 More Discussions You Might Find Interesting

1. Solaris

"/" c0t0d0s0 showing 100%.

hi I recently started looking after server with sunsolaris os. it is dual host system. In one server the '/' showing 56% in other it is showing 100% in df -k. the status of slice was used avail capacity mounted on /dev/dsk.c0t0d0s0 961181 95**** 0 100%...

2. Solaris

What is c0t0d0s0?

I always thought c=controller, t=target, d=disk, s=slice. How exactly are they assigned? My internal drive is c0t1d0. But if I connect an external box, it jumps to c2t10d0, c2t11d0 etc. Is t=target? What exactly does those t-numbers mean and why does it jump to t10, t11 instead of going...

3. Solaris

Unable to login using ssh,telnet onto my solaris machine with solaris 10 installed

Hi, I am unable to login into my terminal hosting Solaris 10 and get the below error message "Server refused to allocate pty ld.so.1: sh: fatal: libc.so.1: open failed: No such file or directory " Is there anyways i can get into my machine and what kind of changes are required to be...

4. Solaris

root disk mirroring in solaris volume manager for solaris 10

Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment. Let me know if you need any deatils on this. Thanks, Rama

5. Solaris

Solaris ssh client hangs when connecting to another Solaris machine

Got a strange problem. I have 4 Solaris servers all configured the same, Solaris 10 x86 update 10. When I try to ssh from one Solaris 10 server to another server ssh hangs. I have an identical server and when I try this everything works fine. The weird thing is if I am root on the server...

LEARN ABOUT LINUX

hd

HD(4)							     Linux Programmer's Manual							     HD(4)

NAME

       hd - MFM/IDE hard disk devices

DESCRIPTION

       The  hd*  devices  are block devices to access MFM/IDE hard disk drives in raw mode.  The master drive on the primary IDE controller (major
       device number 3) is hda; the slave drive is hdb.  The master drive of the second controller (major device number 22) is hdc and	the  slave
       hdd.

       General	IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
       partition on that physical drive.  The first form, hdX, is used to address the whole drive.  Partition numbers are assigned  in	the  order
       the  partitions	are  discovered,  and only nonempty, nonextended partitions get a number.  However, partition numbers 1-4 are given to the
       four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended.  Thus, the first  logi-
       cal  partition  will be hdX5.  Both DOS-type partitioning and BSD-disklabel partitioning are supported.	You can have at most 63 partitions
       on an IDE disk.

       For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on  the
       second one.

       They are typically created by:

	      mknod -m 660 /dev/hda b 3 0
	      mknod -m 660 /dev/hda1 b 3 1
	      mknod -m 660 /dev/hda2 b 3 2
	      ...
	      mknod -m 660 /dev/hda8 b 3 8
	      mknod -m 660 /dev/hdb b 3 64
	      mknod -m 660 /dev/hdb1 b 3 65
	      mknod -m 660 /dev/hdb2 b 3 66
	      ...
	      mknod -m 660 /dev/hdb8 b 3 72
	      chown root:disk /dev/hd*

FILES

       /dev/hd*

SEE ALSO

       chown(1), mknod(1), sd(4), mount(8)

COLOPHON

       This  page is part of release 3.27 of the Linux man-pages project.  A description of the project, and information about reporting bugs, can
       be found at http://www.kernel.org/doc/man-pages/.

Linux								    1992-12-17								     HD(4)