this is part of the summary for the hardware installed , so what do you think ??
Code:
CPU
AMD Opteron 2216
Cores 2
Threads 2
Name AMD Opteron 2216
Code Name Santa Rosa
Package Socket Fr4 (1207)
Technology 90nm
Specification Dual-Core AMD Opteron(tm) Processor 2216
Family F
Extended Family F
Model 1
Extended Model 41
Stepping 3
Instructions MMX (+), 3DNow! (+), SSE, SSE2, SSE3, AMD 64
Virtualization Supported, Disabled
Hyperthreading Not supported
Bus Speed 199.5 MHz
Rated Bus Speed 997.4 MHz
Stock Core Speed 2400 MHz
Stock Bus Speed 200 MHz
Average Temperature 41 °C
Caches
L1 Data Cache Size 2 x 64 KBytes
L1 Instructions Cache Size 2 x 64 KBytes
L2 Unified Cache Size 2 x 1024 KBytes
Core 0
Core Speed 2393.7 MHz
Multiplier x 12.0
Bus Speed 199.5 MHz
Rated Bus Speed 997.4 MHz
Temperature 38 °C
Thread 1
APIC ID 0
Core 1
Core Speed 2393.7 MHz
Multiplier x 12.0
Bus Speed 199.5 MHz
Rated Bus Speed 997.4 MHz
Temperature 44 °C
Thread 1
APIC ID 1
RAM
Memory slots
Total memory slots 8
Used memory slots 8
Free memory slots 0
Memory
Type DDR2
Size 2048 MBytes
Channels # Dual
DRAM Frequency 299.2 MHz
CAS# Latency (CL) 5 clocks
RAS# to CAS# Delay (tRCD) 5 clocks
RAS# Precharge (tRP) 5 clocks
Cycle Time (tRAS) 15 clocks
Bank Cycle Time (tRC) 21 clocks
Command Rate (CR) 1T
Physical Memory
Memory Usage 18 %
Total Physical 2.00 GB
Available Physical 1.62 GB
Total Virtual 2.00 GB
Available Virtual 1.93 GB
SPD
Number Of SPD Modules 4
Slot #1
Type RDRAM
Size 0 MBytes
Manufacturer
Max Bandwidth PC0 (0 MHz)
SPD Ext. EPP
Slot #2
Type RDRAM
Size 0 MBytes
Manufacturer
Max Bandwidth PC0 (0 MHz)
SPD Ext. EPP
Slot #3
Type RDRAM
Size 58 MBytes
Manufacturer
Max Bandwidth PC6766 (3383 MHz)
Part Number °
Serial Number 6320496E
Week/year 101 / 116
SPD Ext. EPP
Slot #4
Type RDRAM
Size 58 MBytes
Manufacturer
Max Bandwidth PC6766 (3383 MHz)
Part Number °
Serial Number 6320496E
Week/year 101 / 116
SPD Ext. EPP
Last edited by Scott; 09-08-2011 at 10:16 AM..
Reason: .
Hi there
the Sunfire X4100 has a great tool that you can get to from BIOS called the configuration utility which allows you to set up Disk mirroring (RAID 1) before the OS sees it, which is great and it works a treat, however, we have a large datacentre across multiuple sites and I need to find... (1 Reply)
Hi there
I am running solaris 10 on an SunFire x4100 ...(x86 box) Could anybody tell me if there is a way I can check the firmware revision without taking the box down to do it ...eeprom doesnt give me the info I require
Cheers (0 Replies)
Hai All
I rquire a small help for Galaxy x4100 server, when we are trying to sepup
ILOM through CLI it gives following error on commitpending=true steps.
set pendingipaddress=172.21.142.158
Set 'pendingipaddress' to '172.21.142.158'
-> set pendingipgateway=172.21.142.5
Set... (1 Reply)
Hi everyone,
I have a problem which looks like very simple. My SunFire X4100 have 2 disk slots: HDD0, HDD1 and 1 hard disk. I installed OS on the hard disk at HDD0 and now i want to boot it at HDD1.
When i change BIOS and begin boot at HDD1 it reset after i chose Solaris 10 at OS selecting... (3 Replies)
I have looked all over the bios configuration to enable hardware virtualization and found nothing. Could someone tell if this server support it and if so where I go to enable that feature. By the way this is a x86 server. (0 Replies)
Hello all.
I have a requirement to install a aftermarket video card in the server, can you advise what fits? or if there is a sun riser part which convers the PCIx slot to PCIe
The unit is a standard x4100 with PCIx slots, not an M2 with the PCIe slots.
thanks (4 Replies)
Hi
I have two Sun Fire X4100 machines with Ubuntu 12.04 installed on them.
I am able to configure the Net Mgt port with an IP address and access the ILOM from the browser. I can also boot the Ubuntu installed and redirect the output.
The issue i have is that when i configure the network... (0 Replies)
Hi,
I am currently on Sunfire X4100. This server doesn't have CDROM drive. Also I can't get to the OK prompt. From my laptop, I am connected to the management port using the Cisco Blue cable.
Please advise how can I get to the OK prompt. Also the server is so loud. Will the FAN cool... (1 Reply)
I have a problem,
I have been installing Redhat Interprise Linux on X4100 M2 Server, when system is reboot after install, the server is restart (reboot) again (alias unlimited).
The bios system show message error "Multi-bit ECC Error" and "bank interleave requested but not enable"
I have... (5 Replies)
Hi,
I was trying to run a program that calls 8 processors (with max. RAM of 2 GB per processor). I want to run this program on my cluster that runs SGE. The cluster has 2 nodes, and each node has 62 cores, and 248GB/node. Currently, I use the scripts below, but the program (softx below) crashes... (0 Replies)