For VIO commands type
For help on command
List unmapped disks
List all disk mappings
list all virtual devices on VIO server partitions
To get VIO version
Thank you for trying to help but non of these answered my questions .
hi,
i tried to mount using
$ mount nimsrv01:/export/mksysb_dev/VDEVVIO1 /mksysb
in vios mode.
i got following error..
</code>
Some error messages may contain invalid information
for the Virtual I/O Server environment.
mount: 1831-008 giving up on:... (1 Reply)
Hello, I'm having troubles running scripts on the VIOS. I want to run a simple script like:
lsmap -all | grep vhost
I've created the file with just like this:
$ cat script1.sh
lsmap -all | grep vhost
When I run the script, it returns the following error message:
script1.sh:... (5 Replies)
I would like to hear your opinions, comments, pros and cons about the IVE (Integrated virtual ethernet) and VIOS (virtual i/o server)
With the VIOS can create virtual ethernet and virtual disk
With the IVE I dont need to create the vios and I can have virtual ethernet (physical and logical... (3 Replies)
Can anybody provide me with usefull links to get knowledge how VIOS works and how to configure Lpars on it? I am tired and feel lazy to search through IBM redbooks :-) .. so pls help me :p (3 Replies)
1.) I am to write scripts that will be phasetest folder in the home directory.
2.) The folder should have a set-up,phase and display files
I have written a small script which i used to check for the existing users and their password.
What I need help with:
I have a set of questions in a... (19 Replies)
Hello,
Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2.
What is the common practice - should I isolate my vios... (0 Replies)
Please forgive me here as I don't fully understand what I am talking about here so if I use the wrong terminology please overlook me.
We have multiple AIX LPARs on the managed system with two VIO Servers. A Co-Worker and I are trying to set up a new LPAR client (The guy that knows this is out)... (14 Replies)
I have 4 VIO server. I have to take backup of VIOS. I got the command "backupios" for taking the backup.
My question is if i am taking "backupios -tape /dev/rmt0 " whether it will take rootvg and all the user defined VG / File system which are using for virtual disk for client lpar.
I... (4 Replies)
Hi,
$ ioslevel
2.2.4.10
I always get these errors when I perform any action using the web interface of IVM / VIOS
Shutdown Partitions Help
You have chosen to shutdown the following partitions. The recommended shutdown method is to use the client operating systems shutdown... (1 Reply)
Hello,
In my environment, I have 2 VIOS. There is 1 lpar uses the first VIOS. Now we would like to move it to second VIOS.
My question is, can we migrate the virtual FC on the lpar to second VIOS?
If not, we have to create new virtual FC on second VIOS and map it to the lpar. This also... (3 Replies)
Discussion started by: Phat
3 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)