I have just purchased a new server running RHELS R6 from a well known supplier. The OS came pre-installed so I (as a previous almost identical server) just finished off the install. I have just been extending one of the partitions and noticed an overlap.
On doing an FDISK...
I was about to commission this My experience is Solaris but looking at the make up here I believe the only way to correct this will be to rebuild because /tmp. /usr, /var and root are all on Volume Group 00?
Cheers.
I've created a partition with GNU Parted, how do I mount the partition?
The manual information at http://www.gnu.org/software/parted/manual/parted.html is good, but I am sure about how I mount the partition afterwards.
Thanks,
--Todd (1 Reply)
Hi everyone,
I posted this earlier, but the idea changed since then and I figured it would make more sense if I repost with a clearer idea in hopes someone can help me out.
I have two lists of data in file1 and file 2
file1 (tab separated - column1 column2 column 3)
1 91625106 ... (1 Reply)
Hello
I've got a script that creates multiple processes, in ksh, to bcp out 6 tables at a time. In the script, we write messages to the log to show our progress; most of the time, the log messages are nice and neat with one per line, like they should be. But every once in awhile, at random, the... (2 Replies)
for every specific $1,$2 check the values ($2,$3) of their E ot I of input1 and overlap with input2.
Specify names based on output.
#######
if middle value is missing name them "SE"
if first value is missing name them "AFE"
if last value is missing name them "ALE"
if 2 middle values are... (1 Reply)
Based on input1 specific key (column1, 4 and 5) take the values (column 2 and 3) overlap with input2. And Specify names based on output.
input1
a1 100 200 E1 ABC
a1 300 400 E2 ABC
a1 500 600 E3 ABC
a2 100 200 E1 CDE
a2 300 400 E2 ... (2 Replies)
Hi all,
New to this forum as well as the world of Veritas Volume Manager. My client is using VxVM 3.2. We just changed one of the disk which is under veritas control. I used the appropriate options in vxdiskadm to replace this failed disk. Now when I am trying to unrelocate subdisks back to the... (0 Replies)
Hi,
I want to overlap two files based on two columns in each files. Here I'm overlapping the first two columns of the first file with columns 3 &4 of the second file (Bolded) to get the common lines.
File1
ESR1 1 15 ggtga
ESR1 7 18 tgcagt
FOXA1 3 10 gtgat
FOXA1 10 20 tgacc
File2... (1 Reply)
Hello All,
I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows,
/boot - Linux Partition & another is
LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc).
Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Hi Help,
I am trying to find a overlap zone by compraing th etwo files which is printed below.
File-1 is ---
1011 234
2967 787
235 900
435 654
File 2 is ---
1211 456
595 678
546 678
2967 787
I would like to have a o/p which just read 2967 787,'comm' doesn't seem to do the... (5 Replies)
Discussion started by: Indra2011
5 Replies
LEARN ABOUT MOJAVE
partx
PARTX(8) System Administration PARTX(8)NAME
partx - tell the kernel about the presence and numbering of on-disk partitions
SYNOPSIS
partx [-a|-d|-P|-r|-s|-u] [-t type] [-n M:N] [-] disk
partx [-a|-d|-P|-r|-s|-u] [-t type] partition [disk]
DESCRIPTION
Given a device or disk-image, partx tries to parse the partition table and list its contents. It can also tell the kernel to add or remove
partitions from its bookkeeping.
The disk argument is optional when a partition argument is provided. To force scanning a partition as if it were a whole disk (for example
to list nested subpartitions), use the argument "-" (hyphen-minus). For example:
partx --show - /dev/sda3
This will see sda3 as a whole-disk rather than as a partition.
partx is not an fdisk program - adding and removing partitions does not change the disk, it just tells the kernel about the presence and
numbering of on-disk partitions.
OPTIONS -a, --add
Add the specified partitions, or read the disk and add all partitions.
-b, --bytes
Print the SIZE column in bytes rather than in human-readable format.
-d, --delete
Delete the specified partitions or all partitions.
-g, --noheadings
Do not print a header line with --show or --raw.
-l, --list
List the partitions. Note that all numbers are in 512-byte sectors. This output format is DEPRECATED in favour of --show. Do not
use it in newly written scripts.
-n, --nr M:N
Specify the range of partitions. For backward compatibility also the format M-N is supported. The range may contain negative num-
bers, for example --nr -1:-1 means the last partition, and --nr -2:-1 means the last two partitions. Supported range specifications
are:
M Specifies just one partition (e.g. --nr 3).
M: Specifies the lower limit only (e.g. --nr 2:).
:N Specifies the upper limit only (e.g. --nr :4).
M:N Specifies the lower and upper limits (e.g. --nr 2:4).
-o, --output list
Define the output columns to use for --show, --pairs and --raw output. If no output arrangement is specified, then a default set is
used. Use --help to get list of all supported columns. This option cannot be combined with the --add, --delete, --update or --list
options.
-P, --pairs
List the partitions using the KEY="value" format.
-r, --raw
List the partitions using the raw output format.
-s, --show
List the partitions. The output columns can be selected and rearranged with the --output option. All numbers (except SIZE) are in
512-byte sectors.
-t, --type type
Specify the partition table type.
--list-types
List supported partition types and exit.
-u, --update
Update the specified partitions.
-S, --sector-size size
Overwrite default sector size.
-v, --verbose
Verbose mode.
-V, --version
Display version information and exit.
-h, --help
Display help text and exit.
EXAMPLES
partx --show /dev/sdb3
partx --show --nr 3 /dev/sdb
partx --show /dev/sdb3 /dev/sdb
All three commands list partition 3 of /dev/sdb.
partx --show - /dev/sdb3
Lists all subpartitions on /dev/sdb3 (the device is used as whole-disk).
partx -o START -g --nr 5 /dev/sdb
Prints the start sector of partition 5 on /dev/sdb without header.
partx -o SECTORS,SIZE /dev/sda5 /dev/sda
Lists the length in sectors and human-readable size of partition 5 on /dev/sda.
partx --add --nr 3:5 /dev/sdd
Adds all available partitions from 3 to 5 (inclusive) on /dev/sdd.
partx -d --nr :-1 /dev/sdd
Removes the last partition on /dev/sdd.
SEE ALSO addpart(8), delpart(8), fdisk(8), parted(8), partprobe(8)AUTHORS
Davidlohr Bueso <dave@gnu.org>
Karel Zak <kzak@redhat.com>
The original version was written by Andries E. Brouwer <aeb@cwi.nl>.
ENVIRONMENT
LIBBLKID_DEBUG=all
enables libblkid debug output.
AVAILABILITY
The partx command is part of the util-linux package and is available from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils
/util-linux/>.
util-linux December 2014 PARTX(8)