Hi,
I have a nasty little problem with my disks on my system
My system configuration is as follows
Sunv890 with sunos 9 connected tot a IBM6800 SAN using a 2port 2 GB qla2342 adapter.
We have bought a EMC SAN. The company who sold us the san, said that it would be no problem connecting the... (10 Replies)
Hi,
I have a SAN LUN of 550 GB created as an ext3 partition of the entire lun and need to make the lun and partition larger... 600 GB
# fdisk -l /dev/sdj
Disk /dev/sdj: 590.5 GB, 590558003200 bytes
255 heads, 63 sectors/track, 71797 cylinders
Units = cylinders of 16065 * 512 = 8225280... (3 Replies)
Hello guys, I'm going crazy over here with a problem with a LUN created on a EMC CX3.
I did sucessfully managed to create the LUN on the Storage (the LUN is named DBLNX25EC_TST), after doing the following process:
echo "1" > /sys/class/fc_host/host<n>/issue_lip
and
echo "- - -" >... (10 Replies)
Hi All,
I have server : Sun-Fire-V490 configured with Solaris 10 zfs
..
and I have configured three mirror the third one from EMC
storage.
root@server # zpool status -v
pool: rpool
state: ONLINE
status: The pool is formatted using an older on-disk format. The pool can
... (8 Replies)
Hello all,
i try to allocate the same LUN to two server (or more in the future)
i use solaris 10, vxvm (vxfs) for data and solaris zones and EMC DMX-4, i try to migrate solaris zones between servers in case of problem.
and this is what i want to do
- affect LUN to srv00124 and srv10155
-... (5 Replies)
we have an old AIX system with important data on an EMC LUN. the AIX server crashed and we had to rebuild it with the old AIX os 5.8. how do we reconnect the EMC LUN without losing the data? (15 Replies)
Discussion started by: jhudson12
15 Replies
LEARN ABOUT DEBIAN
sg_emc_trespass
SG_EMC_TRESPASS(8) SG3_UTILS SG_EMC_TRESPASS(8)NAME
sg_emc_trespass - Changes ownership of a LUN from another Service-Processor to this one.
SYNOPSIS
sg_emc_trespass [-d] [-hr] [-s] [-V] DEVICE
DESCRIPTION
sg_emc_trespass sends an EMC-specific Trespass Command to the DEVICE with the selected options. This Mode Select changes the ownership of
the LUN of the device from another Service-Processor to the one the command was received on.
OPTIONS
Arguments to long options are mandatory for short options as well.
-d outputs some extra debug information associated with executing this command
-hr Sets the 'Honor Reservation' bit in the command. If set, the trespass will only succeed to change the ownership from the Peer SP if
the Peer SP does not have an outstanding SCSI reservation for the LUN. By default, the reservation state will be ignored.
-s Send the short version of the trespass command instead of the long version. The short version is supported on the EMC FC5300, FC4500
and FC4700. The long version (default) is supported on the CLARiiON CX and AX family arrays.
-V print out version string then exit.
In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the 2.6 series block devices (e.g. SCSI disks and DVD
drives) can also be specified. For example "sg_start 0 /dev/sda" will work in the 2.6 series kernels.
EXIT STATUS
The exit status of sg_emc_trespass is 0 when it is successful. Otherwise see the sg3_utils(8) man page.
AUTHOR
Written by Lars Marowsky-Bree, based on sg_start.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright (C) 2004 Lars Marowsky-Bree, Douglas Gilbert.
This software is distributed under the GPL version 2. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE.
sg3_utils-1.23 January 2007 SG_EMC_TRESPASS(8)