Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: How to enable Serial port on ILOM, when Network Port is enabled in parallel
Operating Systems Solaris How to enable Serial port on ILOM, when Network Port is enabled in parallel Post 302551425 by bobby320 on Tuesday 30th of August 2011 10:26:32 AM
Old 08-30-2011
How to enable Serial port on ILOM, when Network Port is enabled in parallel
Hi Everyone,

In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected through a terminal server, authentication to the terminal server is successful and conformed port is opened, but cant able to view the console of the server.

So how do I need to make sure to enable the serial port on iLOM.

Thanks
 

10 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

Parallel Port info?

is there a command so that i can se info about the parallel port, if there isn't a specific command for that is there a command so i can se info about the system and all ports and devices? Thanx /Nick (2 Replies)
Discussion started by: sajjan2
2 Replies

2. Solaris

Serial Port Datalogger

Hi, I'm using Solaris workstation with 5.4 OS. I was wondering if there's a way that I could log the data incoming and outgoing on a certain serial port. Thanks in Advance! (1 Reply)
Discussion started by: uryuu
1 Replies

3. Red Hat

Serial Port/Com Port

System: Red Hat Enterprise Linux WS release 4 (Nahant Update 6) Any idea how to Determine if a Serial Port in Linux System is defective? Issued "cat /proc/tty/driver/serial". see below. ~# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:11... (0 Replies)
Discussion started by: etcpasswd
0 Replies

4. Fedora

Sending a byte to the parallel port

Greetings, A sort of newbie question... I would like to control a couple of stepper motors via the parallel port using C code. I have discovered in Linux, the ioperm() function is required before the outportb() function can be used to send a byte to the parallel port. My problem is ioperm()... (1 Reply)
Discussion started by: meyerga00
1 Replies

5. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies

6. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies

7. HP-UX

Enable ftp port

Hi Experts, Need your help in enabling the ftp port in HP-UX box. Is there any command/config file that needs to be changed? Also is it possible to open it only for few selected IPs only? (9 Replies)
Discussion started by: sai_2507
9 Replies

8. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35... (4 Replies)
Discussion started by: dmiller
4 Replies

9. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies

10. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

LEARN ABOUT DEBIAN

rdma_xserver

RDMA_XSERVER(1) 						     librdmacm							   RDMA_XSERVER(1)

NAME

       rdma_xserver - RDMA CM communication server test program

SYNOPSIS

       rdma_xserver [-p port] [-c comm_type]

DESCRIPTION

       Uses the librdmacm to establish various forms of communication and exchange data.

OPTIONS

       -p port
	      Changes  the  port  number that the server listens on.  By default the server listens on port 7471.  -c communication type Specifies
	      the type of communication established with the client program.  extended reliable-connected XRC QPs.

NOTES

       Basic usage is to start rdma_xserver, then connect to the server using the rdma_xclient program.

       Because this test maps RDMA resources to userspace, users must ensure that they have available system resources and permissions.   See  the
       libibverbs README file for additional details.

SEE ALSO

       rdma_cm(7), udaddy(1), mckey(1), rping(1), rdma_server(1), rdma_xclient(1)

librdmacm							    2011-06-15							   RDMA_XSERVER(1)
All times are GMT -4. The time now is 01:35 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy