Now this needs to be increased to 8GB.
I've been reading about increase SWAP space:
options are:
1. Create a new Swap on a new partition.
2. Increase the actual swap gparted software is needed
3. Create a new file using dd command
OK my question is I am thinking about using gparted to resize / and add more space to /swap but since creating a file with dd looks so easy
I want to know if the swap created with dd command behaves the same way as the swap created on a specific partition? I mean the same performance?
Hello and thanks in advance.
I have a Sun box with raid 1 on the O/S disks using solaris svm.
I want to unmirror my swap partition, and add the slice on the second disk as an additional swap device. This would give me twice as much swap space.
I have been warned not to do this by some... (3 Replies)
Hi all,
I am parsing command line options using getopts.
The problem is that mandatory argument options following ":" is taking next option as argument if it is not followed by any argument.
Below is the script:
while getopts :hd:t:s:l:p:f: opt
do
case "$opt" in
-h|-\?)... (2 Replies)
I have a HP-UX B.11.23 server with 16 gb of memory 84 gb of swap configured. I am being pushed to define more swap to try and get more Tuxedo domains to start. At what point do we have too much swap for the amount of memory? Thanks in advance. (11 Replies)
free -m : 1023 total swap space
created default partition /dev/sdb1 50M using fdisk. i did write the changes.
#mkswap /dev/sdb1
#swapon /dev/sdb1
free -m : 1078 total swap space
this shows that the swap is on
Question : i did not change the type LINUX SWAP (82) in fdisk.
so why is... (5 Replies)
Hi
I have an integrity machine rx7620 and rx8640 running hp-ux 11.31. I'm planning to fine tune the system:
- I would like to know when does the memory swap space spill over to the device swap space?
- And how much % of memory swap utilization should be specified (swap space device... (6 Replies)
To find all the files in your home directory that have been edited in some way since the last tar file, use this command:
find . -newer backup.tar.gz
Is anyone familiar with an older solution?
looking to identify files older then 15mins across several directories.
thanks,
manny (2 Replies)
Hi Solaris Folks :),
I need to calculate the swap usage on solaris server, please let me understand the output of below swap -s and swap -l commands.
$swap -s
total: 1774912k bytes allocated + 240616k reserved = 2015528k used, 14542512k available
$swap -l
swapfile dev swaplo... (6 Replies)
Hi,
I installed some packages required by an app built with python.
But when I try python setup.py install, I get the following error:
/opt/csw/lib/gcc/sparc-sun-solaris2.10/5.2.0/../../../../sparc-sun-solaris2.10/bin/as: unrecognized option `-m32'
Could anyone tell me what's wrong... (4 Replies)
Discussion started by: Kimkun
4 Replies
LEARN ABOUT FREEBSD
swapctl
SWAPON(8) BSD System Manager's Manual SWAPON(8)NAME
swapon, swapoff, swapctl -- specify devices for paging and swapping
SYNOPSIS
swapon [-F fstab] -aLq | file ...
swapoff [-F fstab] -aLq | file ...
swapctl [-AghklmsU] [-a file ... | -d file ...]
DESCRIPTION
The swapon, swapoff and swapctl utilities are used to control swap devices in the system. At boot time all swap entries in /etc/fstab are
added automatically when the system goes multi-user. Swap devices use a fixed interleave; the maximum number of devices is unlimited. There
is no priority mechanism.
The swapon utility adds the specified swap devices to the system. If the -a option is used, all swap devices in /etc/fstab will be added,
unless their ``noauto'' or ``late'' option is also set. If the -L option is specified, swap devices with the ``late'' option will be added
as well as ones with no option. If the -q option is used, informational messages will not be written to standard output when a swap device
is added.
The swapoff utility removes the specified swap devices from the system. If the -a option is used, all swap devices in /etc/fstab will be
removed, unless their ``noauto'' or ``late'' option is also set. If the -L option is specified, swap devices with the ``late'' option will
be removed as well as ones with no option. If the -q option is used, informational messages will not be written to standard output when a
swap device is removed. Note that swapoff will fail and refuse to remove a swap device if there is insufficient VM (memory + remaining swap
devices) to run the system. The swapoff utility must move swapped pages out of the device being removed which could lead to high system
loads for a period of time, depending on how much data has been swapped out to that device.
Other options supported by both swapon and swapoff are as follows:
-F fstab
Specify the fstab file to use.
The swapctl utility exists primarily for those familiar with other BSDs and may be used to add, remove, or list swap devices. Note that the
-a option is used differently in swapctl and indicates that a specific list of devices should be added. The -d option indicates that a spe-
cific list should be removed. The -A and -U options to swapctl operate on all swap entries in /etc/fstab which do not have their ``noauto''
option set.
Swap information can be generated using the swapinfo(8) utility, pstat -s, or swapctl -l. The swapctl utility has the following options for
listing swap:
-h Output values in human-readable form.
-g Output values in gigabytes.
-k Output values in kilobytes.
-m Output values in megabytes.
-l List the devices making up system swap.
-s Print a summary line for system swap.
The BLOCKSIZE environment variable is used if not specifically overridden. 512 byte blocks are used by default.
FILES
/dev/{ada,da}?s?b standard paging devices
/dev/md? memory disk devices
/etc/fstab ASCII file system description table
DIAGNOSTICS
These utilities may fail for the reasons described in swapon(2).
SEE ALSO swapon(2), fstab(5), init(8), mdconfig(8), pstat(8), rc(8)HISTORY
The swapon utility appeared in 4.0BSD. The swapoff and swapctl utilities appeared in FreeBSD 5.1.
BSD November 22, 2013 BSD