I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible?
For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
How do or what do I need to add PCI / PCIe (PCI Express) parallel ports add-on adapters to OpenServer 6.0.0? OpenServer 5 could see PCI slots but OpenServer 6.0.0 (Original CD or the Re-cut one) required a maintenance pack to be installed? Is this right and how do I check to see if these work? (2 Replies)
I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950... (1 Reply)
why is this error message keeps coming once every month. Is this a serious problem?
In the /var/adm/messages file
Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report:
Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26... (7 Replies)
Hello!
I have some X86 desktop computer with G45 embedded dual-head video.
Two monitors can be configured, but with "small" problem: the summ of dimensions in any direction (vert or horis) can't exceed 1680 pix- max sizeof virtual screen area.
Attempts to edit "videoram" parameter in xorg.conf... (0 Replies)
Hi,
I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers?
Thanks,
Ronald (2 Replies)
Hi,
I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages.
fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0... (0 Replies)
I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC.
At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies
LEARN ABOUT NETBSD
isp
ISP(4) BSD Kernel Interfaces Manual ISP(4)NAME
isp -- Qlogic based SCSI and FibreChannel SCSI Host Adapters
SYNOPSIS
isp* at pci? dev? function? (PCI)
isp* at sbus? slot ? offset ? (SBus)
scsibus* at isp?
DESCRIPTION
This driver provides access to SCSI or FibreChannel devices.
SCSI features include support for Ultra SCSI and wide mode transactions for SCSI, and LVD (for the ISP1080 and ISP1280),
Fibre Channel support uses FCP SCSI profile for FibreChannel. and uses Class 3 connections only. Support is available for Public and Pri-
vate loops. Command tagging is supported for all (in fact, FibreChannel requires tagging).
CONFIGURATION
An optional flags 0x80 appended to the above isp* declarations will disable the download of driver firmware, which means you use whatever
firmware is running on the card. If no firmware is running on the card, the driver cannot operate the card.
An optional flags 0x40 appended to the above isp* declarations (can be OR'd in with the other config flags option) will keep the driver from
looking at device or bus NVRAM settings (this is in case NVRAM is just wrong and you have the card in a platform where it is inconvenient to
change NVRAM settings on the card).
HARDWARE
Supported cards include:
ISP1000
SBus Fast Wide, Ultra Fast Wide cards, Single Ended or Differential cards.
PTI SBS440
Performance Technology ISP1000 variants.
ISP1020
Qlogic 1020 Fast Wide and Differential Fast Wide PCI cards.
ISP1040
Qlogic 1040 Ultra Wide and Differential Ultra Wide PCI cards.
PTI SBS450
Performance Technology ISP1040 variants.
Qlogic 1240
Qlogic 1240 Dual Bus Ultra Wide and Differential Ultra Wide PCI cards.
Qlogic 1080
Qlogic 1280 LVD Ultra2 Wide PCI cards.
Qlogic 1280
Qlogic 1280 Dual Bus LVD Ultra2 Wide PCI cards.
Qlogic 2100
Qlogic 2100 and 2100A Copper and Optical Fibre Channel Arbitrated Loop
Qlogic 2102
Qlogic Dual Loop 2100A Optical Fibre Channel Arbitrated Loop PCI cards.
Qlogic 2200
Qlogic 2200 Copper and Optical Fibre Channel Arbitrated Loop PCI cards.
Qlogic 2202
Qlogic 2200 Dual Bus Optical Fibre Channel Arbitrated Loop PCI cards.
Qlogic 2204
Qlogic 2200 Quad Bus Optical Fibre Channel Arbitrated Loop PCI cards.
Qlogic 2300
Qlogic 2300 2-Gigabit Optical Fibre Channel PCI cards.
Qlogic 2312
Qlogic 2300 2-Gigabit Dual Channel Optical Fibre Channel PCI cards.
PTI SBS470
Performance Technology ISP2100 variants.
Antares P-0033
Antares Microsystems ISP2100 variants.
Qlogic 2400
Qlogic 2400 4-Gigabit Optical Fibre Channel PCI cards.
Qlogic 2500
Qlogic 2500 8-Gigabit Optical Fibre Channel PCI cards.
SEE ALSO cd(4), intro(4), scsi(4), sd(4), st(4)AUTHORS
The isp driver was written by Matthew Jacob for NASA/Ames Research Center.
BUGS
The driver currently ignores some NVRAM settings.
The driver currently doesn't do error recovery for timed out commands very gracefully.
Sometimes, when booting, the driver gets stuck waiting for the Fibre Channel firmware to tell it that the loop port database is ready. In
this case you'll see an announcement that the loop state has a value of 0x1. To unwedge the system, unplug and replug the fibre channel con-
nection, or otherwise cause a LIP (Loop Initialization Primitive sequence) - this will kick the firmware into getting unstuck.
BSD June 24, 2009 BSD