NPIV with 8Gb PCI Express Dual Port FC Adapter Post: 302550135

9 More Discussions You Might Find Interesting

1. AIX

Spliting PCI-X Dual Channel Ultra320 SCSI Adapter

I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible? For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot...

2. SCO

PCI / PCIExpress Parallel port in SCO 6.0.0

How do or what do I need to add PCI / PCIe (PCI Express) parallel ports add-on adapters to OpenServer 6.0.0? OpenServer 5 could see PCI slots but OpenServer 6.0.0 (Original CD or the Re-cut one) required a maintenance pack to be installed? Is this right and how do I check to see if these work?

3. SCO

PCI Express 1x HBA for parallel SCSI in Openserver 6

I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950...

4. Solaris

PCI express error :confused:

why is this error message keeps coming once every month. Is this a serious problem? In the /var/adm/messages file Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report: Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26...

5. Solaris

Sol 11 express X86:Dual monitor config,max resolution

Hello! I have some X86 desktop computer with G45 embedded dual-head video. Two monitors can be configured, but with "small" problem: the summ of dimensions in any direction (vert or horis) can't exceed 1680 pix- max sizeof virtual screen area. Attempts to edit "videoram" parameter in xorg.conf...

6. AIX

Vscsi and npiv on same adapter

Hi, I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers? Thanks, Ronald

7. Linux

Sata sil_3132 on pci express is not getting detected in Linux on powerpc

Hi, I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages. fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

9. HP-UX

HPUX 11.11 Sept.2003 cannot see PCI-X scsi adapter

I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC. At the OS prompt (after loading files), ioscan shows the Class ba, and shows...

LEARN ABOUT OPENDARWIN

lsattr

LSATTR(1)						      General Commands Manual							 LSATTR(1)

NAME

       lsattr - list file attributes on a Linux second extended file system

SYNOPSIS

       lsattr [ -RVadlpv ] [ files...  ]

DESCRIPTION

       lsattr lists the file attributes on a second extended file system.  See chattr(1) for a description of the attributes and what they mean.

OPTIONS

       -R     Recursively list attributes of directories and their contents.

       -V     Display the program version.

       -a     List all files in directories, including files that start with `.'.

       -d     List directories like other files, rather than listing their contents.

       -l     Print the options using long names instead of single character abbreviations.

       -p     List the file's project number.

       -v     List the file's version/generation number.

AUTHOR

       lsattr was written by Remy Card <Remy.Card@linux.org>.  It is currently being maintained by Theodore Ts'o <tytso@alum.mit.edu>.

BUGS

       There are none :-).

AVAILABILITY

       lsattr is part of the e2fsprogs package and is available from http://e2fsprogs.sourceforge.net.

SEE ALSO

       chattr(1)

E2fsprogs version 1.44.1					    March 2018								 LSATTR(1)