08-24-2011
How configure micromax bsnl 3G modem in KPPP on slackware 13.1
How configure micromax bsnl 3G modem in KPPP on slackware 13.1 while it automatically mounted under
/dev/sr1 iso9660 /media/modem
and in lsusb command add following information:
Bus 001 Device 020: ID 1c9e:f000
now i follow these steps for usb switch to modem
usb_modeswitch.conf File
DefaultVendor= 0x1c9e |
DefaultProduct= 0xf000 |
TargetVendor= 0x1c9e |
TargetProduct= 0x9605 |
# only for reference |
MessageEndpoint=0x01 |
MessageContent="55534243123456788000000080000606f50402527000000000000000000000" |
run the program:
usb_modeswitch -C usb_modeswitch.conf
modprobe cdc_acm
modprobe usbserial vendor=0x1c9e product=0x9605
now connect with KPP
in Device->modem device-> dev/ttyUSB2, it detect modem and when query
modem by :
modem->Query Modem->Modem Query Result Window show following same string in
each AT1-AT7 field
AT1 :- Manufacturer: "Micromax" Model: Micromax MMX310G 3G USB Modem Revision: LQA0094.1.1_MG32 IMEI: 910532501142484 +GCAP: +CGSM,+FCLASS,+DS
AT2 :- Manufacturer: "Micromax" Model: Micromax MMX310G 3G USB Modem Revision: LQA0094.1.1_MG32 IMEI: 910532501142484 +GCAP: +CGSM,+FCLASS,+DS
so on...
Now Connect
Looking Modem pass
Modem Ready Pass
Initializing Modem hang the overall process & login script display window
show expecting Ok and hang
9 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I have Linux RedHat7.1 and I have this modem
RockWell HCF 56KDATA Fax PCI Modem.
I don't know how to configure this modem. Can anybody please help me out.
I tried "linuxconf" it does not recognize this command. Pleas help me out.
Regards
-Iftikhar (1 Reply)
Discussion started by: syedifti
1 Replies
2. UNIX Desktop Questions & Answers
I am using Slackware 7 on my IBM Thinkpad. I am unable to configure it to display a graphical environment. Typing startx usually generates a few errors. The system, however, does boot into the shell environment without any issues or problems. I have been able to setup Slackware 7 successfully... (2 Replies)
Discussion started by: adrienb
2 Replies
3. UNIX for Dummies Questions & Answers
Ok. I tried following the directions from some of the other threads, but I've hit a road block.
I have red hat 7.3 and I installed the hcf package:
hcfpcimodem-0.99lnxtbeta03042700k2.4.18_3-1rh.i386.rpm
It installed ok, no errors, but I still can't get linux to find my modem. I've tried... (2 Replies)
Discussion started by: lawadm1
2 Replies
4. Solaris
hi,
can u pls help to configure modem on SUN system for the inbound dialing.....so that i can connect to the system remotely through modem..........thx
girish (2 Replies)
Discussion started by: girish_shukla
2 Replies
5. Solaris
Dear All,
i have problem during install modem dial up with smc in solaris 10.
i can't find "login" because it's stop in _receive started transmit started.
thanks for your attention.
this is the list during i dial to this number :
altconn called
Device Type ACU wanted... (0 Replies)
Discussion started by: mr.ridho
0 Replies
6. SuSE
I bought a wireless modem from '' 3 ''.
It has software for Windows users.
I talked to their support center.
They know nothing about Linux.
In Ubuntu, I looked at System --> Administration --> Network
I have to click the unlock in the dialog.
It recognized wired connections; there... (0 Replies)
Discussion started by: Angelo
0 Replies
7. Solaris
Dear Friends,
Kindly help me to connect Broadband connection in my Solaris 10 OS.
I have heard that i have to write a script.
Waiting for solution.........
Thanks (0 Replies)
Discussion started by: anuragpauldani
0 Replies
8. Hardware
Hello everybody,
I'm having troubles with Slackware 13.1 and network cards.
I have one on-board Ethernet card (which is recognized and works okay) and a PCI Ethernet card (which is also recognized, but doesn't appear in 'ifconfig -a'). If i run a 'lspci', i can see the kernel recognized the... (5 Replies)
Discussion started by: semash!
5 Replies
9. Solaris
Hi all,
I am a newbie in UNIX . Earlier I used opensuse 11.3 just because it was secure
for connecting to the INTERNET than Windows. Now I have to use Solaris for my work, so I was thinking of having windows XP2,opensuse 11.3 and solaris on the same pc. In spite of some good suggestion from... (5 Replies)
Discussion started by: M.Choudhury
5 Replies
OD(1) FSF OD(1)
NAME
od - dump files in octal and other formats
SYNOPSIS
od [OPTION]... [FILE]...
od --traditional [FILE] [[+]OFFSET [[+]LABEL]]
DESCRIPTION
Write an unambiguous representation, octal bytes by default, of FILE to standard output. With more than one FILE argument, concatenate
them in the listed order to form the input. With no FILE, or when FILE is -, read standard input.
All arguments to long options are mandatory for short options.
-A, --address-radix=RADIX
decide how file offsets are printed
-j, --skip-bytes=BYTES
skip BYTES input bytes first
-N, --read-bytes=BYTES
limit dump to BYTES input bytes
-s, --strings[=BYTES]
output strings of at least BYTES graphic chars
-t, --format=TYPE
select output format or formats
-v, --output-duplicates
do not use * to mark line suppression
-w, --width[=BYTES]
output BYTES bytes per output line
--traditional
accept arguments in traditional form
--help display this help and exit
--version
output version information and exit
Traditional format specifications may be intermixed; they accumulate:
-a same as -t a, select named characters
-b same as -t oC, select octal bytes
-c same as -t c, select ASCII characters or backslash escapes
-d same as -t u2, select unsigned decimal shorts
-f same as -t fF, select floats
-h same as -t x2, select hexadecimal shorts
-i same as -t d2, select decimal shorts
-l same as -t d4, select decimal longs
-o same as -t o2, select octal shorts
-x same as -t x2, select hexadecimal shorts
For older syntax (second call format), OFFSET means -j OFFSET. LABEL is the pseudo-address at first byte printed, incremented when dump is
progressing. For OFFSET and LABEL, a 0x or 0X prefix indicates hexadecimal, suffixes may be . for octal and b for multiply by 512.
TYPE is made up of one or more of these specifications:
a named character
c ASCII character or backslash escape
d[SIZE]
signed decimal, SIZE bytes per integer
f[SIZE]
floating point, SIZE bytes per integer
o[SIZE]
octal, SIZE bytes per integer
u[SIZE]
unsigned decimal, SIZE bytes per integer
x[SIZE]
hexadecimal, SIZE bytes per integer
SIZE is a number. For TYPE in doux, SIZE may also be C for sizeof(char), S for sizeof(short), I for sizeof(int) or L for sizeof(long). If
TYPE is f, SIZE may also be F for sizeof(float), D for sizeof(double) or L for sizeof(long double).
RADIX is d for decimal, o for octal, x for hexadecimal or n for none. BYTES is hexadecimal with 0x or 0X prefix, it is multiplied by 512
with b suffix, by 1024 with k and by 1048576 with m. Adding a z suffix to any type adds a display of printable characters to the end of
each line of output. --string without a number implies 3. --width without a number implies 32. By default, od uses -A o -t d2 -w 16.
AUTHOR
Written by Jim Meyering.
REPORTING BUGS
Report bugs to <bug-coreutils@gnu.org>.
COPYRIGHT
Copyright (C) 2002 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICU-
LAR PURPOSE.
SEE ALSO
The full documentation for od is maintained as a Texinfo manual. If the info and od programs are properly installed at your site, the com-
mand
info od
should give you access to the complete manual.
od (coreutils) 4.5.3 February 2003 OD(1)