Sponsored Content
Operating Systems AIX NPIV with 8Gb PCI Express Dual Port FC Adapter Post 302549518 by johnf on Tuesday 23rd of August 2011 08:09:06 AM
Old 08-23-2011
NPIV with 8Gb PCI Express Dual Port FC Adapter

All

I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the
Code:
lsnports

command only two of the adapter ports show as capable:

Code:
$ lsnports
name             physloc                        fabric tports aports swwpns  awwpns
fcs1             U78AA.001.WZSG75A-P1-C6-T2          0     64     64   2048    2048
fcs3             U78AA.001.WZSG75A-P1-C4-T2          0     64     64   2048    2048

I have to admit I have not checked the SAN fabric to make sure the connections are correct. However I cannot see why this should result in this behaviour!

Anybody experienced this before please?
 

9 More Discussions You Might Find Interesting

1. AIX

Spliting PCI-X Dual Channel Ultra320 SCSI Adapter

I have 1 PCI-X Dual Channel Ultra320 SCSI Adapter card for my p570 server. I would like to split the 2 channels for the usage of 2 tape drives in different LPARs. Is that possible? For example, I have 2 LPARs running in p570 server, LPAR-A configured the Ultra320 card as pci7 in slot... (11 Replies)
Discussion started by: kwliew999
11 Replies

2. SCO

PCI / PCIExpress Parallel port in SCO 6.0.0

How do or what do I need to add PCI / PCIe (PCI Express) parallel ports add-on adapters to OpenServer 6.0.0? OpenServer 5 could see PCI slots but OpenServer 6.0.0 (Original CD or the Re-cut one) required a maintenance pack to be installed? Is this right and how do I check to see if these work? (2 Replies)
Discussion started by: uxlunatick
2 Replies

3. SCO

PCI Express 1x HBA for parallel SCSI in Openserver 6

I'm floundering here trying to locate a PCI-E 1x HBA that will support an external tape drive in SCO Openserver 6. I was unable to find anything that would work in the compatible hardware list and a call to Adaptec confirmed that PCI-X would've been a better option for the risers in the Dell 2950... (1 Reply)
Discussion started by: s_mal
1 Replies

4. Solaris

PCI express error :confused:

why is this error message keeps coming once every month. Is this a serious problem? In the /var/adm/messages file Nov 26 06:10:42 ids-ldap07 px: WARNING: PCI Express error report: Nov 26 06:10:42 ids-ldap07 device_path = /pci@1e,600000/pci@0/pci@8, msg_code = 0x30, req_id = 0x340, Nov 26... (7 Replies)
Discussion started by: incredible
7 Replies

5. Solaris

Sol 11 express X86:Dual monitor config,max resolution

Hello! I have some X86 desktop computer with G45 embedded dual-head video. Two monitors can be configured, but with "small" problem: the summ of dimensions in any direction (vert or horis) can't exceed 1680 pix- max sizeof virtual screen area. Attempts to edit "videoram" parameter in xorg.conf... (0 Replies)
Discussion started by: urry_buh
0 Replies

6. AIX

Vscsi and npiv on same adapter

Hi, I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers? Thanks, Ronald (2 Replies)
Discussion started by: ronaldm60
2 Replies

7. Linux

Sata sil_3132 on pci express is not getting detected in Linux on powerpc

Hi, I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages. fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0... (0 Replies)
Discussion started by: shubha_1
0 Replies

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

9. HP-UX

HPUX 11.11 Sept.2003 cannot see PCI-X scsi adapter

I am trying to reload a RP4440 with 2x300gb disks and dual Port Network card, with HPUX 11.11 Sept 2003. When the os boots and and gets to the main menu to install HPUX or run recovery, it cannot find the disks or NIC. At the OS prompt (after loading files), ioscan shows the Class ba, and shows... (0 Replies)
Discussion started by: mrmurdock
0 Replies
pcie_pci(7D)							      Devices							      pcie_pci(7D)

NAME
pcie_pci - PCI Express bridge nexus driver DESCRIPTION
The pcie_pci nexus driver is used on X64 servers for PCI Express bridge class devices including PCI Express root ports which are imple- mented as virtual bridges and PCI Express to PCI/PCI-X bridges. The pcie_pci driver is compliant with the PCI Express Base, Revision 1.0a specification and supports Base line PCI Express error handling and PCI Express Hot Plug. FILES
/platform/i86pc/kernel/drv/pcie_pci 32-bit ELF kernel module. /platform/i86pc/kernel/drv/amd64/pcie_pci 64-bit ELF kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+------------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+------------------------------+ |Architecture |x64 PCI Express-based systems | +-----------------------------+------------------------------+ |Availability |SUNWcakr.i | +-----------------------------+------------------------------+ SEE ALSO
attributes(5), pcie(4), npe(7D) PCI Express Base Specification v1.0a --2003 Writing Device Drivers IEEE 1275 PCI Bus Binding -- 1998 http://playground.sun.com/1275/bindings/pci/pci-express.txt SunOS 5.11 12 Oct 2005 pcie_pci(7D)
All times are GMT -4. The time now is 06:58 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy