our server (solaris, bind v 8.1.2) is suppose to be the authoritive or the master and our isp's server is suppose be the secondary. i've created a reverse lookup zone file and added an entry for it in my named.conf file. i've restarted the dns daemon and i don't have any errors in... (1 Reply)
Help having problems accesing various sites that require me to be a registered .gov domain. My IP is a registered as an .gov but my nameserver record has changed on my DNS configurartion(I don't know why) from something.gov to somethingelse.gov. Same IP, though.
When a reverse lookup is... (1 Reply)
Hi,
I am writing a socket program at the moment that uses both of the clients network interfaces. The program tries to create two socket connections to the server over a LAN connection and a GPRS connection. I have tried to update the routing table using the route command but that proved... (0 Replies)
I'm not sure it that's the right term for what I'm asking about, but it's the best I could come up with. Here is my situation...
I'm setting up a network using OpenVPN. The clients I'm setting up will need to be able to access their own DNS servers (to resolve internal names at their location)... (4 Replies)
Write a quick shell snippet to find all of the IPV4 IP addresses
in any and all of the files under /var/lib/output/*, ignoring
whatever else may be in those files. Perform a reverse lookup on
each, and format the output neatly, like "IP=192.168.0.1,
... (0 Replies)
hey guys,
can anybody help me out here on the following:
grep '^\{1,3\}\.\{1,3\}\.\{1,3\}\.\{1,3\}$' ravi.txt mary.txt lisa.txt https://www.unix.com/images/misc/progress.gif
i.e what i did was found ip addreses from different files
and then i want... (1 Reply)
Originally I had the server at home and on Comcast so I used dyndns.org for DNS.
Once the server got a bit more popular, I leased a server at a colo facility. They set up the server name in their DNS so I didn't really have any reason to manage my own DNS. DynDNS was managing the domains and I... (7 Replies)
The Linux resolver queries all nameservers in the order they are listed in /etc/resolver.conf.
If a nameserver times out, it advances on to the following nameserver.
But, if a nameserver returns "not found" (NXDOMAIN) it stops.
This behaviour is problematic when you need to resolve names from... (0 Replies)
Hi,
I have log file name that shows the view name and some SQL statement time
stamp. I want to summarize the SQL time with view. Here is the simple example
Here the seqence is first it prints EventContext and all the SQL statement time and again EventContext. Want to summarize the time for... (5 Replies)
Hi guys. Ok so let me lay out my configs. I can do a NSlookup from client to server BUT NOT a reverse lookup.
DNS server: Optimus.jaydomain.com
IP : 192.168.1.50
DNS Client: Megatron.jaydomain.com
IP : 192.168.1.60
On Sever:
# cat /etc/named.conf
//
// named.conf
//
// Provided... (4 Replies)
Discussion started by: Junaid Subhani
4 Replies
LEARN ABOUT DEBIAN
atalkd
ATALKD(8) Netatalk 2.2 ATALKD(8)NAME
atalkd - AppleTalk RTMP, NBP, ZIP, and AEP manager
SYNOPSIS
atalkd [-f configfile] [-1] [-2]
DESCRIPTION
atalkd is responsible for all user level AppleTalk network management. This includes routing, name registration and lookup, zone lookup,
and the AppleTalk Echo Protocol (similar to ping(8)). atalkd is typically started at boot time, out of /etc/rc. It first reads from its
configuration file, /etc/netatalk/atalkd.conf. If there is no configuration file, atalkd will attempt to configure all available interfaces
and will create a configuration file. The file consists of a series of interfaces, one per line. Lines with `#' in the first column are
ignored, as are blank lines. The syntax is
interface [ -seed ] [ -phase number ] [ -net net-range ] [ -addr address ] [ -zone zonename ] ...
Note that all fields except the interface are optional. The loopback interface is configured automatically. If -seed is specified, all
other fields must be present. Also, atalkd will exit during bootstrapping, if a router disagrees with its seed information. If -seed is not
given, all other information may be overriden during auto-configuration. If no -phase option is given, the default phase as given on the
command line is used (the default is 2). If -addr is given and -net is not, a net-range of one is assumed.
The first -zone directive for each interface is the ``default'' zone. Under Phase 1, there is only one zone. Under Phase 2, all routers on
the network are configured with the default zone and must agree. atalkd maps ``*'' to the default zone of the first interface. Note: The
default zone for a machine is determined by the configuration of the local routers; to appear in a non-default zone, each service, e.g.
afpd, must individually specify the desired zone. See also nbp_name(3).
ROUTING
If you are connecting a netatalk router to an existing AppleTalk internet, you should first contact your local network administrators to
obtain appropriate network addresses.
atalkd can provide routing between interfaces by configuring multiple interfaces. Each interface must be assigned a unique net-range
between 1 and 65279 (0 and 65535 are illegal, and addresses between 65280 and 65534 are reserved for startup). It is best to choose the
smallest useful net-range, i.e. if you have three machines on an Ethernet, don't chose a net-range of 1000-2000. Each net-range may have an
arbitrary list of zones associated with it.
EXAMPLES
Below is an example configuration file for a sun4/40. The machine has two interfaces, ``le0'' and ``le1''. The ``le0'' interface is
configured automatically from other routers on the network. The machine is the only router for the ``le1'' interface.
le0
le1 -seed -net 9461-9471 -zone netatalk -zone Argus
atalkd automatically acts as a router if there is more than one interface.
FILES
/etc/netatalk/atalkd.conf configuration file
BUGS
On some systems, atalkd can not be restarted.
SEE ALSO atalkd.conf(5)Netatalk 2.2 06 Sep 2004 ATALKD(8)