Hi,
I've recently mirrored the 4 disks in a V440. Disks 0 + 1 have been mirrored with hardware mirroring using the command raidctl -c c1t0d0 c1t2d0, the other 2 disks have been mirrored using Soltisce Disk Suite. I know how to check the progress for the SDS mirroring but how can I find the... (2 Replies)
Hello Gurus!!
Very recently i tried to mount a USB pen drive onto my solaris 10 (X4170 model) server. As i understand, in ideal scenarios it should get mounted automatically, but it did not happen. Neither anything is shown in "iostat -En" output or "rmformat -l" about the pen drive.
I also... (10 Replies)
Hello, I have 4 drives (500G each) in a raid 10, I got a power failior and this is the result?
cat /proc/mdstat
Personalities :
md126 : inactive sdb sdc sdd sde
1953536528 blocks super external:-md127/0
md127 : inactive sdd(S) sde(S) sdb(S) sdc(S)
9028 blocks super... (3 Replies)
Hi everyone,
I am not sure if I understand how mdadm --create /dev/md0 --level=container works?
A device called /dev/md0 appears in /proc/mdstat but I am not sure how to use that device?
I have 2 blank drives with 1 500GB partition on each. I would like to setup mirroring, but not in the... (0 Replies)
Trying to mount an external 160GB Toshiba drive but....
this is my dmesg tail output:
usb 2-2: new high speed USB device using ehci_hcd and address 3
usb 2-2: New USB device found, idVendor=13fd, idProduct=1618
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-2:... (4 Replies)
had this RHEL 5 installation with /dev/sda1 and /dev/sda2 running..
created two more partitions /dev/sdj1 and /dev/sdj2 , the same sized partition as /dev/sda
trying to use mdadm to create RAID1 ..
I cannot even do it in "rescue" mode, I wonder if it can be done..
it kept... (2 Replies)
Hi
I am using SUSE 11 linux
I have couple of "nfs" entries in /etc/fstab which are automatically loaded after system restart.
One of the entry is windows drive mounted using cifs as shown below
//IP-Address/Partition /mnt/x cifs credentials=/creds/.creds,rw,uid=<name> 0 0
I want to... (1 Reply)
Hello,
i have a system with 6 sata3 seagate st3000dm01 disks running on stable Debian with software raid mdadm. i have md0 for root and md1 for swap and md2 for the files. i now want to add one more disk = sdh4 for md2 but i got this errors:
The new disk is connected to an 4 port sata... (7 Replies)
I am connecting a USB mass storage removeable drive to Solaris 10 x86 machine.
The device is detected and i am able to perform standard read and write functions.
But i want to use a code to send IOCTL based SCSI commands to the same device to read and write the data. Which i am unable to do so.... (17 Replies)
Hi fellow members!
I have a oracle solaris server with two internal disks, that acts as an authentication server only, and for now the server seems to be doing its job, but when typing metastat -c I get some notifications.
I am not familiar with SVM, I wonder if someone can help me on this:... (3 Replies)
Discussion started by: fretagi
3 Replies
LEARN ABOUT SUSE
sdl::cdrom
SDL::Cdrom(3) User Contributed Perl Documentation SDL::Cdrom(3)NAME
SDL::Cdrom - a SDL perl extension for managing CD-ROM drives
SYNOPSIS
use SDL::Cdrom;
$cdrom = SDL::Cdrom->new(0);
$cdrom->play();
EXPORTS
o "CD_NUM_DRIVES".
DESCRIPTION
Create a new SDL::Cdrom object. The passed $id is the number of the drive, whereas 0 is the first drive etc.
use SDL::Cdrom;
my $drive => SDL::Cdrom->new($id);
METHODS
CD_NUM_DRIVES()
Returns the number of CD-ROM drives present.
name()
Returns the system dependent name of the CD-ROM device.
status()
Return the status of the drive.
play()
Play a track.
pause()
Pause the playing.
resume()
Resume the playing.
stop()
Stop the playing.
eject()
Eject the medium in the drive.
id()
Return the ID of the drive.
num_tracks()
Return the number of tracks on the medium.
track()
Returns the track description
current()
Return the current played track number.
current_frame()
Return the current frame.
AUTHORS
David J. Goehrig Documentation by Tels <http://bloodgate.com/>.
SEE ALSO
perl SDL::Mixer SDL::App.
perl v5.12.1 2010-07-05 SDL::Cdrom(3)