NTP server to support IPv4 and IPv6 client Post: 302544740

9 More Discussions You Might Find Interesting

1. Solaris

ntp server and ntp client

All, How do you set a Solaris 9 server which received ntp updates from a ntp server to broadcast them on a local subnet. I have created a /etc/inet/ntp.conf file to receive the updates from a server on network and need to make this server become like a ntp relay from the main server. Any...

2. IP Networking

DNS Server with IPv6 support

Hello, i have a problem with a dns server. It is running bind 9.4.1 (compiled with "-enable-ipv6") on an AIX 5.3 system. The server starts without any errors or warnings. I am also able to lookup names for IPv4 adresses. But with IPv6 i have a strange problem. When i execute the following dig...

3. UNIX for Advanced & Expert Users

convert from ipv4 to ipv6

hello i'm working on aix 5300-05-03 hacmp ver 5.4 well my issue is that when firewall (gateway to internet ) goes down my machine start to work very very slowly!!! the output of the sniffer is that on the output card , my machine try to convert ipv4 to ipv6 0.0.2.0 my machine is not configure...

4. AIX

convert ipv4 ti ipv6

hello i'm working on AIX 5300-05-03 P520 hacmp 5.4 when connection to the internet is going down , firewall down, my application work verey verey slowly!!! and on the sliffer output i'm got trys of my serevr to do convert from ipv4 ipv6 ( 0.0.2.0 and AAAAAAAA). some one have an idea why...

5. Linux

configuring an NTP client/server

I need to configure an NTP daemon on a "bridge-PC" connected on 2 LANs. It is expected to read the correct time on a time server on the first LAN and behave as a server for the second LAN. Can I do both the things with ntpd? In other words, is ntpd able to work as client and server at the same...

6. IP Networking

How to create Local IPv6 and IPv4 networks by using ubuntu server as router

Hi, I have two Cent OS Linux systems and one Ubuntu OS system contains two Ethernet Cards. I need to create two networks by using Ubuntu sys as router. One network need to configure in IPv4 addresses and another network should configure in IPv6 addresses. Please help me how to configure two...

7. AIX

IPv6/IPv4 Only in AIX

Hi all, I have setup ipv6 in AIX machine using autoconf6 command. I was successfull in doing this. after execution of the command local link address was assigned to one of the interfaces (en1).But I have to setup the following environment as well. 1) Machine with only IPv6 support(IPv4...

8. Solaris

Ntp between ipv4 and ipv6

Hi, I am looking for a solution to configure ntp between ipv4 ( ntp server ) to ipv6 ( client) . I had google, but lot many sites suggest to have dual stock or tunnaling. my issue is I have client has only ipv6 address ans server has ipv4 address. is it possible to sync time,...

9. Red Hat

Ntp client sync with local over ntp server

Hi, I have two ntp servers in my cluster and I want all the nodes in my cluster to sync with either of the ntp servers or just one. Unfortunately it keep rotating the sync, between my ntp server 1, ntp server 2 and local. Is there anyway I can change the sync to avoid local? # ntpq -p ...

LEARN ABOUT DEBIAN

curvetun

curvetun(8)							netsniff-ng-toolkit						       curvetun(8)

NAME

       curvetun - lightweight curve25519-based multiuser IP tunnel

SYNOPSIS

       curvetun [-d|--dev <tun>][-x|--export][-C|--dumpc][-S|--dumps] [-k|--keygen][-c|--client [<alias>]][-s|--server][-N|--no-logging]
       [-p|--port <num>][-t|--stun <server>][-4|--ipv4][-6|--ipv6] [-v|--version][-h|--help]

DESCRIPTION

       curvetun embeds a client and a server to build and manage multiuser IP tunnels using Elliptic Curve Cryptography (ECC)

EXAMPLES

       curvetun --keygen
	   Generate public/private keypair. This needs to be done before to get things started.

       curvetun --export
	   Export public data to remote servers

       curvetun --server -4 -u -N --port 6666 --stun stunserver.org
	   Start a UDP IPv4 curvetun server on port 6666.  Use stunserver.org as STUN server.

       curvetun --client=ethz
	   Start curvetun client using the profile called 'ethz'

OPTIONS

       -k|--keygen
	   Generate public/private keypair.

       -x|--export
	   Export your public data for remote servers.

       -C|--dumpc
	   Dump parsed clients.

       -S|--dumps
	   Dump parsed servers.

       -D|--nofork
	   Do not daemonize.

       -d|--dev <tun>
	   Networking tunnel device, e.g. tun0.

       -c|--client [<alias>]
	   Client mode, server alias optional.

       -s|--server
	   Server mode.

       -N|--no-logging
	   Disable server logging (for better anonymity).

       -p|--port <num>
	   Port number (mandatory).

       -t|--stun <server>
	   Show public IP/Port mapping via STUN.

       -u|--udp
	   Use UDP as carrier instead of TCP.

       -4|--ipv4
	   Tunnel devices are IPv4.

       -6|--ipv6
	   Tunnel devices are IPv6.

       -v|--version
	   Print version.

       -h|--help
	   Print help text and lists all options.

AUTHOR

       Written by Daniel Borkmann <daniel@netsniff-ng.org> and Emmanuel Roullit <emmanuel@netsniff-ng.org>

DOCUMENTATION

       Documentation by Emmanuel Roullit <emmanuel@netsniff-ng.org>

BUGS

       Please report bugs to <bugs@netsniff-ng.org>

								    2012-06-29							       curvetun(8)