Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161 Post: 302543121

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sending SNMP Traps in AIX / Unix

Hi, Just wondering if anyone knows how can I send an SNMP Trap in Unix Environment(AIX) to another machine (NT/Ux) after having activated the SNMP in the AIX. Can this be done by using a single command line or do I have to write a script for it? Thanks in advance for your advices. :)

2. UNIX for Dummies Questions & Answers

Changing SNMP port number

hi, i am using Sun Solaris 8 (Sparc). Currently there is a SNMP agent running on port 161. How should I change it to port 8001? which file to modify and restart is necessary? pls teach me the information. thanks

3. SCO

Want to set up SNMP with MIB on SCO OS5

Want to setup snmp with mib to track system issues on SCO OS5.0.5. Is there somewhere I can look that will give me insight in how to answer some of the questions the mkdev snmp asks?

4. Solaris

Any Idea about (SNMP) HOST-RESOURCES-MIB

Hello , I am using (Application Manager 7) software for monitoring. I want to add the servers to monitored using SNMP but it shows this error HOST-RESOURCES-MIB is not implemented in the Snmp Agent. your help is highly appreciated ..... :)

5. Solaris

import UCD-SNMP-MIB into snmpd

I was setting up snmpd on a Solaris 8 server and needed more than the standard mibs, so I installed net-snmp so I could get the UCD-SNMP-MIB. I did not know another way, but I am able to monitor what I need. I would like to know if I could import the UCD-SNMP_MIB into the existing...

6. Infrastructure Monitoring

UDP Port 161

hi guys My linux server have SNMP configure port by default is 161 (UDP) now my monitor team - who are using Nagios - say the server are not being monitor so check netstat -lnu and I see all is OK and snmp service is running fine what else should I check about this port 161? to see if it is...

7. Infrastructure Monitoring

Solaris 10 Snmp command to MiB OID

Hi guys, I am doing follow this guy Tech deposits. : iostat monitoring for zenoss and such I stuck at this step: Add a line into /etc/snmp/snmpd.conf file: pass .1.3.6.1.4.1.2021.255.1 /usr/local/bin/sar_iostat_snmp.sh -m 1 -d dev253 -o .1.3.6.1.4.1.2021.255.1 and test snmp by the...

8. IP Networking

Sending data from DELL OMSA SNMP and Custom SNMP MIB to same UDP port 161

Hi , Currently DELL OMSA SNMP sends data through default udp port 161.I want my custom SNMP MIB also to send data in the same udp port 161.Whether its possible.If yes where to configure .I tried starting my custom MIB in udp port 161,but it throws port already in use.Kindly guide.

9. UNIX for Dummies Questions & Answers

Need to transfer all kernel logs (var/log/messages) to the snmp listener as snmp trap

i am working with embedded system -Dell DCS management sub system. my question is as below: currently we are using linux kernel 2.6.30 build and we have a kernel logs stored to the /var/log/messages path. now we have to transfer all this logs to the specified SNMP target as a part of SNMP...

10. AIX

AIX native SNMP producing limited results when walking MIB tree

The company I work for has various AIX servers that I've recently migrated to AIX 7.1 (from 6.1). Some are powerHA clusters some are not. Likewise, the systems engineer that I replaced had net-snmp installed on said clustered systems. Long story short I am re-invoking AIX's native SNMP (v3) for...

LEARN ABOUT DEBIAN

jack.udp

JACK.UDP(1)															       JACK.UDP(1)

NAME

       jack.udp - JACK UDP Transport Client

SYNOPSIS

       jack.udp [options] send|recv

OPTIONS

       -b : Set the ring buffer size in frames (default=4096). -c : Set the client name (default=jack.udp-PID). -n : Set the number of channels,
       and therefore the number of JACK ports (default=2). -p : Set the port number (default=57160). -r : The remote host name, for use in send
       mode (default="127.0.0.1").

DESCRIPTION

       jack.udp is a UDP audio transport mechansim for JACK. The send mode reads signals from a set of JACK input ports and sends UDP packets to
       the indicated port at the indicated host at a rate determined by the local JACK daemon. The recv mode reads incoming packets at the indi-
       cated port and writes the incoming data to a set of JACK output ports at a rate that is determined by the local JACK daemon.

       This transport mechanism is unreliable. Both send and recv clients will report buffer overflow and underflow occurences, and recv clients
       will report dropped and out-of-order packets, and shutdown on channel mismatch packets. In practice this mechanism can be made highly reli-
       able over local networks.

       jack.udp implements no connection logic, use jack.plumbing(1) instead.

EXAMPLE

	   192.0.0.1:~$ jack.udp -r 192.0.0.2 send
	   192.0.0.2:~$ jack.udp recv

AUTHOR

       Rohan Drape http://slavepianos.org/rd/

SEE ALSO

       jackd(1)

AUTHOR

       Rohan Drape <rd@slavepianos.org>
	   Author.

								    01/10/2012							       JACK.UDP(1)

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sending SNMP Traps in AIX / Unix

Discussion started by: goliath

2. UNIX for Dummies Questions & Answers

Changing SNMP port number

Discussion started by: champion

3. SCO

Want to set up SNMP with MIB on SCO OS5

Discussion started by: herd5cusa

4. Solaris

Any Idea about (SNMP) HOST-RESOURCES-MIB

Discussion started by: adel8483