read() from ttyS1 issue while write() is Ok Post: 302542480

10 More Discussions You Might Find Interesting

1. Programming

popening for read and write

How can 'popen()' be used for reading and writing to opening pipe? If i try 'popen("prog", "rw")' and then put and get chars - it does not work. What is wrong?

2. Shell Programming and Scripting

I have tried to show the file name whose size is greater than 200 byte in current directory. Please help me. ls -l | tr -s " " " " | cut -f 5,9 -d " " >out.txt #set -a x `cat out.txt` i=0 `cat out.txt` | while do read x echo $x #re=200 j=0 if }" < "200" ] then echo $j j=`expr $j...

3. Shell Programming and Scripting

Find all files with group read OR group write OR user write permission

I need to find all the files that have group Read or Write permission or files that have user write permission. This is what I have so far: find . -exec ls -l {} \; | awk '/-...rw..w./ {print $1 " " $3 " " $4 " " $9}' It shows me all files where group read = true, group write = true...

4. Programming

read/write files

Hi all, I have a problem with some read/write functions. I have a .bin file which contains a lot of structures as follows: struct alumno { char id; char apellido1; char apellido2; char nombre; float nota1p; float nota2p; float notamedia; char photofilename; }; What I have...

5. IP Networking

read/write,write/write lock with smbclient fails

Hi, We have smb client running on two of the linux boxes and smb server on another linux system. During a backup operation which uses smb, read of a file was allowed while write to the same file was going on.Also simultaneous writes to the same file were allowed.Following are the settings in the...

6. IP Networking

write() / read() syntax

hi am newbie to unix and socket programing I am trying to figuring out syntax for read and write to send data from server to client and client can read it I have to send two integers write(newsockfd,buffer,"%d %d",x,y,0) writing from client where x and y are two integers.. ...

7. Programming

Need help about read() and write() on TCP/IP

HI I need to implement a client/server TCP application. the customer is the client and the bartender is the server. When the customer enter the Bar, client connects to the server Server should reply the client immediately. Other wise if the server is busy, it should send an update message...

8. Emergency UNIX and Linux Support

Capturing console (/dev/ttyS1) logs

Hi, I have been trying to capture console logs from the init script. When the ramfs is mounted, i check if usb is connected , if conncted, i mount it and redirected the console logs like so: cat & /dev/ttyS1 >> /mnt/logs.txt I'm getting /bin/sh : /dev/ttyS1 :permission denied ...

9. Shell Programming and Scripting

File Read and Write

I have got a file in following format: AAAAAAA BBBBBBBB CCCCCCC DDDDDDD I am trying to read this file and out put it in following format: AAAAAAA,BBBBBBB,CCCCCCC,DDDDDD Preferred method is shell or Perl. Any help appreciated.

10. Programming

FIFO write and read

Can someone help me to write this program in C in QNX? Using the FIFO queues write a simple communication system consisting of programs write and read. The program write the parameters given strings enclosed in single quotes. These strings are written to the FIFO file. Reads the program read...

LEARN ABOUT DEBIAN

ttysrv

TTYSRV(8)						      System Manager's Manual							 TTYSRV(8)

NAME

       ttysrv - connect to a serial port and log output

SYNOPSIS

       ttysrv [-o option] [-s sock] [-l log] -t tty [-b baud] [-p parity] [-w wordsize] [-i pidfile]

DESCRIPTION

       ttysrv  is  the backend for rconsole.  It connects to the serial port, handles the log file and waits for connections from rconsole to view
       what's happening on the serial console.

OPTIONS

       -t tty Specify which device to connect to.

       -s sock
	      The name of the socket to listen for connections from rconsole on.

       -o option
	      Specify any ttyios options to open the port with. Currently only nolocal is supported.

       -l log The logfile to write to. If not set then no log is kept.

       -b baud
	      Set the baud rate to talk to the port at. Defaults to 9600.

       -p parity
	      Set the parity for the serial port. Defaults to none.

       -w wordsize
	      Set the word size for the serial port. Defaults to 8 bits.

       -i pidfile
	      The file to write the pid of ttysrv to. If not specified no such file is written.

SEE ALSO

       rconsole(1), remote-tty(1).

AUTHOR

       rtty was written by Paul Vixie <vixie@isc.org>. This manual page was written by Jonathan McDowell <noodles@earth.li> for the Debian project
       (but may be used by others).

								   May 23, 2006 							 TTYSRV(8)

10 More Discussions You Might Find Interesting

1. Programming

popening for read and write

Discussion started by: szzz

2. Shell Programming and Scripting

read and write from a file

Discussion started by: rinku

3. Shell Programming and Scripting

Find all files with group read OR group write OR user write permission

Discussion started by: shunter63

4. Programming

read/write files

Discussion started by: Attenea