Thanks JohnF. I understand that SEA is a Layer 2 bridge between the physical and the virtual interface. But in this case , only ent1 has a I/P. So, without the I/p how is the trafiic send from ent0 or ent2 ?
I have had another look at the listing and now fully understand what is going on and your problem!
The VIO server is fitted with a four port ethernet card hence ent0, 1, 2, and 3 which is not listed but must be there as the first virtual connector became ent4 with ent5 as its control channel (These were created on the HMC before the etherchannel adapter was created hence the etherchannel adapter is ent6). The etherchannel was then created probably using the following command on the VIO server:
Following this the only virtual SEA was created on the VIO server using the following command:
All of this means the adapter ent1 is a physical port on the VIO server which is configured with a management / admin address (whichever your organisation uses).
As I said earlier you will need to connect the client LPARs virtual ethernet adapter to whichever VLAN id was declared when ent4 was created. To find this VLAN id you can either look at the VIO server on the HMC or run the command
which will list the VLAN id in the listing which is quite long!
Last edited by johnf; 07-26-2011 at 05:06 AM..
Reason: bad spelling!
I have a script running remotely using viosvrcmd command on hmc to back up the VIO servers. these are the steps involved
1. Mount the NFS directory on to the VIO server
2. run backupios command
3. un mount the directory
I am stuck up in the 3rd step. I am not able to unmount the nfs... (6 Replies)
Hi,
I want to know wheather partition size for installation of vio client can be specified on vio server
example
If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
Hi Guys,
I'm working on building a new 595 machine.. I'm try to achieve high availability for the VIO clients using 2 VIO servers, The ethernet part is satisfied using SEA failover, Now how do I achieve redundancy for the disks, its the servers internal disk attached to the scsi cards...
... (2 Replies)
I have same lun (hdisk3) assigned to 2 vios server (dual vio server) and this is mapped to the client lpar. I have sddpcm on the VIO.
On the VIOA, the attributes for fscsi1 and fscsi3 are set to fast_fail and dyntrk is set to yes
Now, if I do a lqueryvg -Atp on the hdisk3, I get a "DISK... (4 Replies)
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
Hi,
I am facing an issue in vio server. When I run
bosboot -ad /dev/hdisk0
I am getting an error
trustchk: Verification of attributes failed: /usr/sbin/bootinfo
: accessauths
regards,
vjm
Please use code tags next time for your code and data. (8 Replies)
Hi,
So I downloaded this kernel source and was able to build it successfully.
But I want to add this SDK source code inside, can anyone help me how to do this? Note that the SDK source can be built by itself.
I added the SDK in the main Makefile:
init-y := init/
#added SDK... (0 Replies)
We've got two datacenters and in every datacenter 2 VIOs.
The VIO manages the I/O of the LPARs. So: Is it possible to reboot the VIO without shuting down an LPAR:wall: (4 Replies)
Hi Team,
My new build configuration always looking for the files from the build where i copied from.
please help me to resolve this.
I am using Visual studio 2008.It has Qt 4.8. plugins,qml,C++ development
I created new debug_new build configuration with additional preprocessor from the... (1 Reply)
Discussion started by: SA_Palani
1 Replies
LEARN ABOUT SUNOS
create-resource-adapter-config
asadmin-create-resource-adapter-config(1AS) User Commands asadmin-create-resource-adapter-config(1AS)NAME
asadmin-create-resource-adapter-config, create-resource-adapter-config - creates the configuration information in
domain.xml for the connector module
SYNOPSIS
create-resource-adapter-config --user admin_user [--password admin_password] [--host localhost] [--port 4848] [--secure|-s] [--passwordfile
filename] [--terse=false] [--echo=false] [--interactive=true] [--threadpools threadpoolids] [--property name=value[:name=value]*] raname
Creates configuration information for the connector module. This command can be executed prior to deploying a resource adapter, so that the
configuration information is available at the time of deployment, or after deployment. If the resource adapter is created after deployment,
the resource adapter is started. You must first create a threadpool, using the create-threadpool command, and then identify that threadpool
value as the ID in the--threadpools option.
This command is supported in remote mode only.
OPTIONS --user authorized domain application server administrative username.
--password password to administer the domain application server.
--host machine name where the domain application server is running.
--port port number of the domain application server listening for administration requests.
--secure if true, uses SSL/TLS to communicate with the domain application server.
--passwordfile file containing the domain application server password.
--terse indicates that any output data must be very concise, typically avoiding human-friendly sentences and favoring well-
formatted data for consumption by a script. Default is false.
--echo setting to true will echo the command line statement on the standard output. Default is false.
--interactive if set to true (default), only the required password options are prompted.
--threadpool the threadpool ID from which the work manager gets the thread.
--property configuration properties of the resource adapter java bean.
OPERANDS
raname the value kept in the resource-adapter-name in the domain.xml file.
Example 1: Using create-resource-adapter-config
asadmin> create-resource-adapter-config --username admin1 --password adminadmin
myresourceadapter
Command create-resource-adapter-config executed successfully
EXIT STATUS
0 command executed successfully
1 error in executing the command
asadmin-create-threadpool(1AS), asadmin-delete-resource-adapter-config(1AS), asadmin-list-resource-adapter-configs(1AS)J2EE 1.4 SDK March 2004 asadmin-create-resource-adapter-config(1AS)