How to Clone a Drive with 512 byte Sectors to a Drive with 4096 bytes/sector (AF)?
I have a 320 GB drive which dual boots Windows and Debian:
and a new 750 GB drive with 4096 byte sectors:
I want to clone the smaller drive to the larger drive so I can replace the smaller drive with the larger drive, so I need to preserve the dual boot capability. I have tried the latest testing-amd64 Clonezilla, but it fails. I tried the proportional setting and it still failed.
How can I clone the smaller drive to the larger drive?
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
My mksysb scripts gives the following text on standard error:
bosboot: Boot image is 22995 512 byte blocks.
How come on a Aix 5200-07 aix-system.
I thought this message meant that the tape (/dev/rmt0) is not bootable,
but I read about a limit of 12 MB and 22995 block is less than 12 MB
... (0 Replies)
Anyone know how I can map a windows drive to an apache shared drive?
In my httpd.conf file, I have:
Alias /merc_rpts/ "/u/merc_rpts/"
<Directory "/u/merc_rpts">
Options Indexes
</Directory>
I'm able to bring up a browser and see the contents of this folder.
In... (0 Replies)
I have BIND 9.8.1-P1 cache only DNS server running in Solaris 10. I have upgraded the same from 9.6.1 to 9.8.1-P1. Now i am facing "file descriptor exceeds limit (4096/4096)" error frequently on the server.
Please help me on this issue! (1 Reply)
Hi,
I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file
scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0):
drive offline
genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430
... (1 Reply)
Discussion started by: Prasanth T K
1 Replies
LEARN ABOUT MOJAVE
newfs_exfat
NEWFS_EXFAT(8) BSD System Manager's Manual NEWFS_EXFAT(8)NAME
newfs_exfat -- construct a new ExFAT file system
SYNOPSIS
newfs_exfat [-N] [-R] [-I volume-serial-number] [-S bytes-per-sector] [-a sectors-per-FAT] [-b bytes-per-cluster] [-c sectors-per-cluster]
[-n number-of-FATs] [-s total-sectors] [-v volume-name] special
DESCRIPTION
The newfs_exfat utility creates an ExFAT file system on device special. If the -R option is not given, and the device is already formatted
as ExFAT, it will preserve the partition offset, bytes per cluster, FAT offset and size, number of FATs, offset to start of clusters, number
of clusters, volume serial number, and volume name (label). If a volume name was specified via the -v option, that name is used instead of
the volume's previous name.
The options are as follow:
-N Don't create a file system: just print out parameters.
-R Do not check whether the device is currently formatted as ExFAT. Always derive the partition offset, bytes per cluster, FAT offset
and size, and offset to start of clusters based on the device type and size.
-I volume-serial-number
Volume ID, a 32-bit integer.
-S bytes-per-sector
Number of bytes per sector. Acceptable values are powers of 2 in the range 512 through 4096.
-a sectors-per-FAT
Number of sectors per FAT.
-b bytes-per-cluster
File system block size (bytes per cluster). Acceptable values are powers of 2 in the range 512 through 33554432.
-c sectors-per-cluster
Sectors per cluster. Acceptable values are powers of 2 in the range 1 through 65536.
-n number-of-FATs
Number of FATs. Acceptable values are 1 or 2. The default is 1. Using any value other than 1 is discouraged, and may be incompati-
ble with other devices.
-s total-sectors
The total number of sectors in the device.
-v volume-name
Volume name (label). The name will be converted to UTF-16, and must be no longer than 11 UTF-16 characters. ASCII control charac-
ters and some punctuation characters are not allowed (similar to DOS 8.3-style names). NOTE: The volume name may be an empty (zero-
length) string.
EXAMPLES
newfs_exfat /dev/disk0s1
Create a file system, using default parameters (or existing ExFAT layout), on /dev/rdisk0s1.
newfs_exfat -v Hello disk2s1
Create a file system with the name "Hello" on /dev/rdisk2s1.
SEE ALSO mount_exfat(8), fsck_exfat(8)DIAGNOSTICS
Exit status is 0 on success and 1 on error.
HISTORY
The newfs_exfat command appeared in Mac OS X 10.6.3.
Darwin January 19, 2010 Darwin