Device eth0 issue Post: 302540675

5 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Eth err: "3c501 device eth0 does not seem to be present"

HI, When I do 'service network restart' , I am getting the following error. "3c501 device eth0 does not seem to be present, delaying initialization" Can any one suggest me the cause/solution for this? When I do 'lspci' it is showing the ehternet card as " Ethernet controller"Marvell...

2. AIX

How to find all device on p570 when need do device firmware upgrade?

I need upgrade firmware for the device of p570, when I go to IBM FIX download website, there are a lot of device of p570 listed. How can I know what device I have on my p570?

3. Solaris

Global device issue in sun cluster3.2

In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ? VM1:/>cd /dev/global -bash: cd: /dev/global: No...

4. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

5. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

LEARN ABOUT XFREE86

ati

ATI(4)							     Kernel Interfaces Manual							    ATI(4)

NAME

       ati - ATI video driver

SYNOPSIS

       Section "Device"
	 Identifier "devname"
	 Driver "ati"
	 ...
       EndSection

DESCRIPTION

       ati is an Xorg wrapper driver for ATI video cards.  It autodetects whether your hardware has a Radeon, Rage 128, or Mach64 or earlier class
       of chipset, and loads the radeon(4), r128(4), or mach64 driver as appropriate.

SUPPORTED HARDWARE

       The ati driver supports Radeon, Rage 128, and Mach64 and earlier chipsets by loading those drivers.  See those manpages for specific  cards
       supported.

CONFIGURATION DETAILS

       Please refer to xorg.conf(5) for general configuration details, and the specific card driver for driver configuration details.

SEE ALSO

       Xorg(1), xorg.conf(5), Xserver(1), X(7), r128(4), radeon(4)

AUTHORS

       See the individual driver pages for authors.

X Version 11						      xf86-video-ati 6.14.99							    ATI(4)