is there a way to force an error on an xscf much the same way you can with logger on solaris 10? i would like to test and make sure setarchiving is appropriately configured. however, i do not want to just pull a power source as the system is in production. anyway have any insight? showarchiving... (0 Replies)
While entering to service mode on XSCF i getting following error
XSCF> service
Account is not enabled for service mode.
What could be the reason for this ? (5 Replies)
Hi, I was working on the M3000 and I did a init 0, powered off the system during the weekend. When I tried to poweron today, the XSCF linux boot image keeps on rebooting and does not go to the login for XSCF access. The "Check" LED is on amber. Tried diagnosing but cant get the system up. Any help... (1 Reply)
Hi,
We are planning to buy new server for our data center. Sun T5240 or M3000 which one have better performance, we are going to create many dt sessions in this server. So, i need your suggestions.
RJS (4 Replies)
we have a SUN M3000 server.
setup as only 1 domain.
disk c0t0d0 and c0t1d0 and setup as SVM mirrors.
a few days ago disk T1 failed.
new we have replaced the disk, but can's see the disk in format.
have done cfgadm and devfsadm.
still can't access the new disk in format.
the output... (6 Replies)
Hi All,
I have SPARC T4-4 connected with XSCF console. By mistake console user name is set to "root" instead of "sunadmin" (This is what we keep as standard). How can I change it ? Please help me
-> show /SP/users/root
/SP/users/root
Targets:
ssh
Properties:
role... (1 Reply)
Hi
We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g.
As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can... (6 Replies)
Hi all,
I understand SP is a separate processor use for management purposes.
I understand XSCF is the management facility (similar to IDRAC, ILOM etc).
I understand that we can create multiple domains in a SPARC machine (something like VM) and we can install OS in it.
I am able to use... (4 Replies)
Hi All,
I have an Oracle M4000 server with Solaris 10 OS. I have access to Solaris root prompt.
But I don't know the XSCF IP of this server.
Is there any way to display XSCF IP from Solaris OS? (2 Replies)
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT NETBSD
ipwctl
IPWCTL(8) BSD System Manager's Manual IPWCTL(8)NAME
ipwctl -- configure Intel PRO/Wireless 2100 network adapter
SYNOPSIS
ipwctl [-i] iface
ipwctl [-i] iface -r
DESCRIPTION
The ipwctl utility controls the operation of Intel PRO/Wireless 2100 networking devices via ipw(4) driver.
You should not use this program to configure IEEE 802.11 parameters. Use ifconfig(8) instead.
OPTIONS
The options are as follows:
-i iface
Display adapter's internal statistics.
-i iface -r
Display the radio switch state (on or off).
FILES
The firmware, loaded automatically, is not shipped with NetBSD; install the pkgsrc/sysutils/ipw-firmware package. The original archive is
available from Intel at: http://ipw2100.sourceforge.net/firmware.php?fid=3.
ipw2100-1.2.fw BSS mode (connection to an access point) firmware
ipw2100-1.2-i.fw IBSS mode (point-to-point connection) firmware
ipw2100-1.2-p.fw Monitor mode firmware
SEE ALSO ipw(4), ifconfig(8), pkgsrc/sysutils/ipw-firmware
AUTHORS
The ipwctl utility and this man page were written by Damien Bergamini <damien.bergamini@free.fr>.
BSD April 17, 2006 BSD