is there a way to force an error on an xscf much the same way you can with logger on solaris 10? i would like to test and make sure setarchiving is appropriately configured. however, i do not want to just pull a power source as the system is in production. anyway have any insight? showarchiving... (0 Replies)
While entering to service mode on XSCF i getting following error
XSCF> service
Account is not enabled for service mode.
What could be the reason for this ? (5 Replies)
Hi, I was working on the M3000 and I did a init 0, powered off the system during the weekend. When I tried to poweron today, the XSCF linux boot image keeps on rebooting and does not go to the login for XSCF access. The "Check" LED is on amber. Tried diagnosing but cant get the system up. Any help... (1 Reply)
Hi,
We are planning to buy new server for our data center. Sun T5240 or M3000 which one have better performance, we are going to create many dt sessions in this server. So, i need your suggestions.
RJS (4 Replies)
we have a SUN M3000 server.
setup as only 1 domain.
disk c0t0d0 and c0t1d0 and setup as SVM mirrors.
a few days ago disk T1 failed.
new we have replaced the disk, but can's see the disk in format.
have done cfgadm and devfsadm.
still can't access the new disk in format.
the output... (6 Replies)
Hi All,
I have SPARC T4-4 connected with XSCF console. By mistake console user name is set to "root" instead of "sunadmin" (This is what we keep as standard). How can I change it ? Please help me
-> show /SP/users/root
/SP/users/root
Targets:
ssh
Properties:
role... (1 Reply)
Hi
We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g.
As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can... (6 Replies)
Hi all,
I understand SP is a separate processor use for management purposes.
I understand XSCF is the management facility (similar to IDRAC, ILOM etc).
I understand that we can create multiple domains in a SPARC machine (something like VM) and we can install OS in it.
I am able to use... (4 Replies)
Hi All,
I have an Oracle M4000 server with Solaris 10 OS. I have access to Solaris root prompt.
But I don't know the XSCF IP of this server.
Is there any way to display XSCF IP from Solaris OS? (2 Replies)
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT DEBIAN
usbprog
USBPROG(1) USBprog USBPROG(1)NAME
usbprog - Programmer for the USBprog hardware
SYNOPSIS
usbprog [options] [commands]
DESCRIPTION
USBprog has two modes: An interactive mode and a batch mode. Both mode use exactly the same commands. As every command takes a fixed number
of arguments, no separator is necessary between commands -- just specify as much commands as you would like to execute.
The help command gives a list of all commands, ? command can be used to get help for a specific command. Example:
(usbprog) help
(usbprog) ? upload
OPTIONS
Following options can be specified, both for the interactive and the batch mode:
-h | --help
Prints a short help.
-v | --version
Prints the version number to standard output.
-d | --datadir datadir
Uses datadir instead of ~/.usbprog.
-o | --offline
Don't try to connect to the internet. Use the cached firmware and index file(s) only.
-D | --debug
Enable debugging output.
COMMANDS
This section describes all commands. As mentioned above, the syntax is the same for interactive and batch usage.
help This just prints an overview about every command, i.e. the command name and an one-sentence description.
helpcmd | ? command
Print a detailed description for command.
exit | quit
Quit the program. On Unix, you can also send an EOF by pressing Ctrl-d on your terminal.
copying | license
Prints a short license (GPL) text and the version number of the program.
list | firmwares
Prints a list of available firmwares. A [*] shows that the firmware is available in the offline cache.
download firmware
Downloads the specified firmware. Use the same string as you retrieved from the firmwares command described above. This command
doesn't work in offline mode.
info firmware
Shows some basic information about firmware like what it does, the latest version number, the author and the USB ID which the
USBprog device has after this firmware has been uploaded. See also the pins command.
pins firmware
This shows the PIN assignment of firmware and the meaning of the LED and jumpers. See also the info command for basic information
about the firmware.
cache clean | delete
clean deletes all old firmware versions from the firmware cache, i.e. if the latest version of a firmware is 5, then it deletes the
versions 0 to 4 if they are still on disk. The delete command deletes the whole firmware cache. Only the index and history file are
in the cache directory after executing this command.
devices
Shows a list of connected USB devices related to USBprog. The currently used update device an be set with device and is also marked
in the output.
device number | name
Sets the update device for the upload command. You have to use the integer number or the device name you retrieved from the devices
command.
upload firmware | file
Uploads a new firmware. The firmware identifier can be found with the list command. Alternatively, you can also specify a file name
on the disk. The extension doesn't matter.
FILES
~/.usbprog/version.xml
Index file, downloaded from http://www.ixbat.de/usbprog/versions.xml.
~/.usbprog/history
The saved readline(1) history.
~/.usbprog/*
The rest in that directory are firmware files. The naming scheme is name.version.
AUTHOR
The USBprog program and documentation has been written by Bernhard Walle <bernhard@bwalle.de>.
SEE ALSO usbprog-gui(1), http://www.embedded-projects.net/index.php?page_id=135
0.2.0 2010-01-04 USBPROG(1)