You could look at the description of the "lsdev" output as well. Mine say "Dual Port"
You can also see that only the last "T#" is different in the "Hardware Location Code" as shown by the "lscfg" command indicating that they are both located in the same physical location which also points to a dual port adapter.:
Hi Guys,
Can somebody help me how to add and activate addtional ip address on AIX.
My server is IBM p5-570
i already set ipadress on ent1
ent0 -- 192.168.206.105 ( default )
ent1 -- 192.168.0.89 (additional)
i can ping from outside to 192.168.0.89 but i can not telnet or ftp.
for... (6 Replies)
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Hi,
I am a newbie to AIX. We have 2 AIX5.3 servers in our environment, I need to transfer some files in Binary mode from one server to another and some files in ASCII mode from one server to another server. Could you please help me as to how I need to do that?
Thanks,
Rakesh (4 Replies)
Hello,
I would like to create a shell script which would check whether the hosts have SAN dual path or not. If yes, then I should get a success message, else should get a list of hosts on which SAN dual path is not working.
Thanks.. (4 Replies)
Hi all,
I have an environment with Aix and Linux severs zoned to tape drives
I'd like to list HBAs WWN on my servers which are zoned to the drives.
Thanks (1 Reply)
Hello,
Please help me with a script with which I can check long running processes on the database server and the os is AIX.
Best regards,
Vishal (5 Replies)
Hi Experts, Kind of embarrassed to ask this , it's been a while I've done this . Can anyone verify below procedure to replace HBA in the VIO server. Many client LPARs are using this HBA for NPIV . Please correct me if I am wrong . Thanks in Advanced
Identify the HBA (did that)
Unconfigure the... (2 Replies)
Discussion started by: JME2015
2 Replies
LEARN ABOUT DEBIAN
set_color
set_color(1) fish set_color(1)NAME
set_color - set_color - set the terminal color
set_color - set the terminal color
Synopsis
set_color [-v --version] [-h --help] [-b --background COLOR] [COLOR]
Description
Change the foreground and/or background color of the terminal. COLOR is one of black, red, green, brown, yellow, blue, magenta, purple,
cyan, white and normal.
o -b, --background Set the background color
o -c, --print-colors Prints a list of all valid color names
o -h, --help Display help message and exit
o -o, --bold Set bold or extra bright mode
o -u, --underline Set underlined mode
o -v, --version Display version and exit
Calling set_color normal will set the terminal color to whatever is the default color of the terminal.
Some terminals use the --bold escape sequence to switch to a brighter color set. On such terminals, set_color white will result in a grey
font color, while set_color --bold white will result in a white font color.
Not all terminal emulators support all these features. This is not a bug in set_color but a missing feature in the terminal emulator.
set_color uses the terminfo database to look up how to change terminal colors on whatever terminal is in use. Some systems have old and
incomplete terminfo databases, and may lack color information for terminals that support it. Download and install the latest version of
ncurses and recompile fish against it in order to fix this issue.
Version 1.23.1 Sun Jan 8 2012 set_color(1)