T5140 CPU Speed is 1200 Mhz or 1165 Mhz? Post: 302538457

10 More Discussions You Might Find Interesting

1. Solaris

processor speed in mHZ

how do i tell the processor speed on solaris 8?

2. AIX

cpu speed

how do i determine the speed of a cpu on AIX 4.3.3 or 5.1?

3. Solaris

440 MHz problems in UltraSparc 5 Computer

Hi all, I recently purchased a 440 MHz processor module for my Sun Ultrasparc 5 computer. I installed the module, updated the boot prom to the most recent version and when the machine starts up the initial white screen shows I have a 333 MHz processor installed ! I checked the details of the...

4. UNIX for Dummies Questions & Answers

Light *nix system for 133 mhz?

I have an old pc, about 133-200 mhz with very little memory and hard-drive. I want to install a small and fast *nix system with ion or some other simple wm for maximal performance. It's supposed to be used as a desktop. If someone could share their experience with older machines and some...

5. UNIX for Dummies Questions & Answers

Linux for Pentium @ 150 Mhz and 98Mb in RAM?

I don't know a lot of the world of Linux, but i want to start with an old machine; did someone knows if i can install Linux in a computer with a processor Pentium (not celeron) @ 133 Mhz, 98Mb in RAM (PC100) and 3Gb Hard Drive? a friend tell me about Ubuntu and openSUSE, but I don't know if...

6. HP-UX

Get CPU speed without root permissions

How can I get the CPUs speed without root permissions? Thanks.

7. HP-UX

How to find CPU Speed of HP UX

Need to find the CPU speed of HP UX for a non root login. echo "itick_per_usec/D" | adb /stand/vmunix /dev/mem | tail -1 will give the following for non root users ERROR: cannot open `/dev/mem', errno = 13, Permission denied

8. Linux

Installation of Linux in 300 MHz with 128 MB ram

Hi I am very new to Linux, but very keen to learn it. I am having a desktop of 300 MHz with 128 MB RAM and 30 GB hard drive with Windows XP. My first question is - Is there any version/flavour of Linux available that can be installed on above system especially Fedora with less compromise...

9. HP-UX

get CPU speed use pstat APIs

I get my CPU speed use pstat APIs use this program serach google and just test it #include <errno.h> #include <stdio.h> #include <unistd.h> #include <sys/param.h> #include <sys/pstat.h> #define CPU_ID 0 #define HZ_PER_MHZ 1000000 int main() { struct pst_processor pst; union pstun pu; ...

10. Linux Benchmarks

HP C3750 workstation, PA-8700+ 875 MHz 2 GB RAM

CPU/Speed: 875 MHz Ram: 2 GHz Motherboard: Bus: PCI Cache: 2.25MB Controller: SCSI Disk: 2x SEAGATE ST373405LC 73 GB Load: 1 user, idle Kernel: 2.6.26-2-parisc Kernel ELF?: pgms: gcc version 4.3.2 (Debian 4.3.2-1.1) Shell scripts (8 concurrent) 1 2 3 Dc: sqrt(2) to 99 decimal...

LEARN ABOUT HPUX

cfgetispeed

cfspeed(3C)															       cfspeed(3C)

NAME

       cfgetospeed(), cfsetospeed(), cfgetispeed(), cfsetispeed() - tty baud rate functions

SYNOPSIS

DESCRIPTION

       These  functions set and get the input and output speed codes in the termios structure referenced by termios_p.	The termios structure con-
       tains these speed codes representing input and output baud rates as well as other terminal related parameters.  Setting the parameters on a
       terminal file does not become effective until is successfully called.

	      returns the output speed code from the
				  termios structure referenced by termios_p.

	      sets the output speed code in the
				  termios  structure  referenced by termios_p to speed.  The speed code for a baud rate of zero, is used to termi-
				  nate the connection.	If is specified, the modem control lines are no longer asserted,  which  normally  discon-
				  nects the line.

	      returns the input speed code from the
				  termios structure referenced by termios_p.

	      sets the input speed code in the
				  termios structure referenced by termios_p to speed.

RETURN VALUE

       returns the output speed code from the termios structure referenced by termios_p.

       returns the input speed code from the termios structure referenced by termios_p.

       and return zero upon successful completion.  Otherwise, they return -1 and set to indicate the error.

ERRORS

       and fail when the following condition is encountered:

	      [EINVAL]	     The value of speed is outside the range of possible speed codes as specified in

WARNINGS

       and can be used to set speed codes in the termios structure that are not supported by the terminal hardware.

SEE ALSO

       tcattribute(3C), thread_safety(5), termio(7).

STANDARDS CONFORMANCE

																       cfspeed(3C)