"Can't open boot device" error !! Post: 302537867

9 More Discussions You Might Find Interesting

1. Solaris

A NEW version of "boot: cannot open kernel/sparcv9/unix "

Ok, I found this article: https://www.unix.com/sun-solaris/19665-boot-cannot-open-kernel-sparcv9-unix.html However it doesn't quite describe my situation. I have created a jumpstart DVD that works great, and installs my customized Solaris-10 (Yes 10, not 8 or 9 per previous posts) . It...

2. Solaris

Solaris 10 - Unable to boot the system "panic: cannot open /kernel/amd64/unix"

Hi All, I have installed Solaris 10 on my AMD 64 3000+ system. I was playing with grub commands eeprom and bootadm commands. I screwed my boot-file and now am unable to boot the system. Gets error msg as "panic: cannot open /kernel/amd64/unix". I booted the system is filesafe and tried update the...

3. Emergency UNIX and Linux Support

Mapping between "Pseudo name" and "Logical device ID" in powerpath with SVM changed....

Dear All, I was having powerpath 5.2 on SUN server with SVM connected to CLARIION box.Please find the following output : root # powermt display dev=all Pseudo name=emcpower3a CLARiiON ID=CK200073400372 Logical device ID=60060160685D1E004DD97FB647BFDC11 state=alive; policy=CLAROpt;...

4. UNIX for Dummies Questions & Answers

UNIX rm -rf error "rm: cannot remove `filename' : Device or resource busy"

Hi Everyone, I am trying to remove a directory: $ rm -rf directory_name/ rm: cannot remove `directory_name/filename': Device or resource busy What does this mean, and why can't I remove these files? I already tried moving into the directory, and removing the files individually, but I...

5. Red Hat

DELL M910 with RedHat Linux 5.5 getting "Buffer I/O error on device sdd"

Dear Guru, IHAC who is using Redhat Linux 5 on DELL M910. When system bootup, it show "Buffer I/O error on device sdd" error message. Below is the "dmesg" output. The scenario is: If more external FC SAN disk LUN add, the device would change other name. So it will impact the raw device...

6. Solaris

Repeated error - "se_hdlc: clone device must be attached before use" in /var/adm/messages

Below is the error being repeated on my Solaris 9 Sun-Fire-V890 machine. SAN team confirmed as everything is fine from their end. I did google and found that some people say its a known Oracle bug when you have Oracle 10G installed on your system but I kind of disagree with them. Please see below...

7. SCO

NFS umount shows the "Device busy (Error 16)"

Hi there After making a backup copy of it sometimes happens that when I want to unmount an NFS indicates the error:umount: /path_mount busy: Device busy (Error 16) if I run lsoff, I can not find the process that is blocking the application. I'm using OpenServer 5.0.2c as one NFS server ...

8. Shell Programming and Scripting

Expect: spawn id exp5 not open while executing "expect "$" { send "sudo su -\r" }"

Hi All, i am trying to ssh to a remote machine and execute certain command to remote machine through script. i am able to ssh but after its getting hung at the promt and after pressing ctrl +d i am gettin the out put as expect: spawn id exp5 not open while executing "expect "$" {...

9. UNIX for Beginners Questions & Answers

SPARC T4-1 "ERROR: boot-read fail"

Either I try to boot from USB bootable drive or from a bootable dvdrom, I am receiving a message ERROR: boot-read fail {0} ok probe-scsi-all This command may hang the system if a Stop-A or halt command has been executed. Please type reset-all to reset the system before executing this...

LEARN ABOUT DEBIAN

pxfw

pxfw(8) 							     pxfw 0.5								   pxfw(8)

NAME

       pxfw - Firmware flashing tool for Plextor CD/DVD devices

SYNOPSIS

       pxfw -l
       pxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]
       pxfw -d DEVICE [-e] [-r] [-t] [-v]

DESCRIPTION

       pxfw is the linux firmware flasher for Plextor CD and DVD drives.  Remove any disks before flashing.

FEATURES

       You can flash the firmware of these drives:
       Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.

DEVICE

       can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.

       Linux:
       /dev/hdX: IDE device
       /dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
       /dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device

       OpenBSD/NetBSD:
       /dev/rcdX

       FreeBSD:
       /dev/cd: SCSI device
       /dev/acd: ATA device

       MacOS X:
       /dev/disk:

       win32:
       C:,D:,E:, ... X:,Y:,Z:

OPTIONS

       -l   scan busses for all available CD and DVD devices

       -if  select inputfile. Specify the firmware binary file, which should
	    be written to DEVICE.

       -u   proceed update. When the firmware checksum test has succeeded,
	    write firmware to DEVICE.

       -f   force flashing. Even if DEVICE is not recognized, or firmware.
	    checksum has failed, firmware writing will be forced.
	    Handle with care.

       -e   read EEPROM from DEVICE.

       -r   reboot the device.

       -t   test which opcodes are supported by the device.

       -v   debug.

EXAMPLES

       pxfw -d /dev/hdc -if 755_1.07.bin -u
       writes firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.

       pxfw -d /dev/sr3 -e -oe file.foo
       reades EEPROM from device /dev/sr3 and writes it to file.foo.

       please report man page improvements to T.Maguin@web.de

Gennady ShultZ Kozlov						  02 April, 2009							   pxfw(8)