07-06-2011
How to check if my AIX server has Dual HBA's?
Thanks I need to know if my server has dual HBA and if multipath has been configured. For Multipath I ran lspath and it shows all drives and if MPIO is configured for that drive.
Thanks for any input.
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hi there,
does anybody knows/info on compatiblity on Emulex Lightpulse 9000 with IBM 8840 PKU X346 server.
Regards. (0 Replies)
Discussion started by: gagasan_makmur
0 Replies
2. AIX
Hi Guys,
Can somebody help me how to add and activate addtional ip address on AIX.
My server is IBM p5-570
i already set ipadress on ent1
ent0 -- 192.168.206.105 ( default )
ent1 -- 192.168.0.89 (additional)
i can ping from outside to 192.168.0.89 but i can not telnet or ftp.
for... (6 Replies)
Discussion started by: cahyo3074
6 Replies
3. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
4. AIX
Hi,
I am a newbie to AIX. We have 2 AIX5.3 servers in our environment, I need to transfer some files in Binary mode from one server to another and some files in ASCII mode from one server to another server. Could you please help me as to how I need to do that?
Thanks,
Rakesh (4 Replies)
Discussion started by: rakeshc.apps
4 Replies
5. UNIX for Advanced & Expert Users
Hello,
I would like to create a shell script which would check whether the hosts have SAN dual path or not. If yes, then I should get a success message, else should get a list of hosts on which SAN dual path is not working.
Thanks.. (4 Replies)
Discussion started by: mahive
4 Replies
6. Red Hat
What command in redhat linux to know your memory if
it is single, dual or quad rank.
Anyone? (2 Replies)
Discussion started by: Mujakol
2 Replies
7. UNIX for Dummies Questions & Answers
Hi all,
I have an environment with Aix and Linux severs zoned to tape drives
I'd like to list HBAs WWN on my servers which are zoned to the drives.
Thanks (1 Reply)
Discussion started by: Sara_84
1 Replies
8. AIX
Hello,
Please help me with a script with which I can check long running processes on the database server and the os is AIX.
Best regards,
Vishal (5 Replies)
Discussion started by: Vishal_dba
5 Replies
9. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
10. AIX
Hi Experts, Kind of embarrassed to ask this , it's been a while I've done this . Can anyone verify below procedure to replace HBA in the VIO server. Many client LPARs are using this HBA for NPIV . Please correct me if I am wrong . Thanks in Advanced
Identify the HBA (did that)
Unconfigure the... (2 Replies)
Discussion started by: JME2015
2 Replies
LEARN ABOUT SUNOS
hba_refreshinformation
HBA_RefreshInformation(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_RefreshInformation(3HBAAPI)
NAME
HBA_RefreshInformation, HBA_RefreshAdapterConfiguration - refresh information for a specific HBA
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
void HBA_RefreshInformation(HBA_HANDLE handle);
void HBA_RefreshAdapterConfiguration(void);
PARAMETERS
handle an open handle returned from HBA_OpenAdapter(3HBAAPI)
DESCRIPTION
The HBA_RefreshInformation() function requests that the underlying VSL reload all information about the given HBA. This function should be
called whenever any function returns HBA_STATUS_ERROR_STALE_DATA, or if an index that was previously valid returns HBA_STATUS_ERROR_ILLE-
GAL_INDEX. Because the underlying VSL can reset all indexes relating to the HBA, all old index values must be discarded by the caller.
The HBA_RefreshAdapterConfiguration() function updates information about the HBAs present on the system. This function does not change any
of the relationships between the HBA API and adapters that have not been reconfigured. HBA handles continue to refer to the same HBA even
if it is no longer installed. The HBA name or index assigned by the library remains assigned to the same HBA even if it has been removed
and reinstalled, as long as the bus position, WWN, and OS device have not changed. Adapter that have been removed and not replaced cannot
have their HBA handles, HBA names, and HBA indexes reassigned. Calls to these adapters will generate HBA_STATUS_ERROR_UNAVAILABLE.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API |
| |version 1) |
+-----------------------------+-----------------------------+
| |Standard: FC-HBA Version 4 |
| |(API version 2) |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO
HBA_OpenAdapter(3HBAAPI), libhbaapi(3LIB), attributes(5)
T11 FC-MI Specification
SunOS 5.10 1 Sep 2003 HBA_RefreshInformation(3HBAAPI)