07-02-2011
kindly check
P690_shbnbksrv/nbkcatalog/CD1-AIX>cfgmgr -i .
FAILURES
--------
Filesets listed in this section failed pre-installation verification
and will not be installed.
Missing Filesets
----------------
The following filesets could not be found on the installation media.
If you feel these filesets really are on the media, check for typographical
errors in the name specified or, if installing from directory, check for
discrepancies between the Table of Contents file (.toc) and the images that
reside in the directory.
devices.fcp.changer
<< End of Failure Section >>
8 More Discussions You Might Find Interesting
1. AIX
I have a P570 that for some reason is not allowing the P1-T6 NIC to be recognized. I have confirmed from the HMC that it is set for the LPAR, but when I do a cfgmgr, it won't recognize it. It though is recognizing the slot cards just fine which are P1-C3 for one shelf and P1-C3 of another shelf.... (1 Reply)
Discussion started by: LegendMan
1 Replies
2. AIX
Hi - can anybody tell me what the default behaviour is for cfgmgr when it allocates hdisk numbers to newly discovered disks in the ODM ? I want to add a disk from our FAStT700 SAN disk array and import it on our p-series (AIX 5.2). Problem is we import and export Flashcopy devices fror scripted... (5 Replies)
Discussion started by: fosteria
5 Replies
3. AIX
Hi All,
I remember my old senior mentor in AIX that cfgmgr should not be terminated on your console. Because if it's terminated in the middle, the odm might get corrupted.
Is that true for AIX 5.x?
Regards,
itik (1 Reply)
Discussion started by: itik
1 Replies
4. AIX
Hi all,
I have a System i server with a couple of AIX LPARs.
One of the LPARs owns a dual-channel scsi adapter to which I connect a tape library (IBM TS3100) and a DVD Drive.
I had some problems to get the Tape Library detected but finally I got it:
rmt0 Available 03-08-01-4,0 IBM 3580... (1 Reply)
Discussion started by: wendelalexis
1 Replies
5. AIX
OS: AIX 6.1
The host has a dual port NIC installed and when I went to run `cfgmgr -v` to configure it I got an error showing device packages are missing from the install:
`cfgmgr -v` on 10.15.xx.xxx
cfgmgr: 0514-621 WARNING: The following device packages are required for device support but... (3 Replies)
Discussion started by: b1f30
3 Replies
6. AIX
Hi
When I run cfgmgr -v in my aix box I get the below error :
cfgmgr: 0514-621 WARNING: The following device packages are required for
device support but are not currently installed.
devices.loopback
My oslevel is 6100-06-02-1044
Please assist.
Please use and tags when... (3 Replies)
Discussion started by: samsungsamsung
3 Replies
7. AIX
Hello guys,
on one of our AIX VIO LPARs I can not remove hdiskpower devices, which seemed to presented to the VIO in an incorrect way and behaviour (not all paths can be seen, pseudo device name is unknown etc.)
Therefor I decided to deattach the hdiskpower device from PowerPath controll by: ... (5 Replies)
Discussion started by: tomek79
5 Replies
8. Post Here to Contact Site Administrators and Moderators
Hi,
My AIX server able to detect the LUN's which is mapped from IBM v7k storage, And i allocated one more LUN from HP storage but it's appear two hdisk instead of one and it's showing incorrect LUN ID.
SDDPCM driver already installed on this server.
During cfgmgr, Im getting this message :... (1 Reply)
Discussion started by: xinuadmin
1 Replies
rmfdmn(8) System Manager's Manual rmfdmn(8)
NAME
rmfdmn - removes a file domain
SYNOPSIS
/sbin/rmfdmn [-f] domain
OPTIONS
Turns off the message prompt.
OPERANDS
Specifies the name of an existing file domain.
DESCRIPTION
Use the rmfdmn utility to remove an existing, but unused, file domain and all its filesets from the system.
When you remove a file domain: The file domain and its filesets are destroyed The directory entry for the file domain in the /etc/fdmns
file is deleted AdvFS volumes which were assigned to the file domain are relabeled as unused
Before attempting to remove a file domain, unmount all filesets and clone filesets from the domain using the umount command. If you
attempt to remove a file domain that has mounted filesets or clone filesets, the system does not remove the file domain. Instead, it dis-
plays an error message indicating that a fileset is mounted.
For each file domain you attempt to remove, a prompt similar to the following is displayed: rmfdmn accounts_dmn rmfdmn: remove domain
accounts_dmn? [yes/no]
If you answer n, the file domain remains. If you answer y, it is removed. The default is n, the file domain remains.
The -f option is useful for scripts when you do not want to be queried for each file domain. If you choose the -f option, no message prompt
is displayed. The rmfdmn command operates as if you responded yes to the prompt.
RESTRICTIONS
You must be the root user to use this command.
To remove a domain, all filesets and clone filesets must be unmounted.
The rmfdmn command can leave a partially-removed domain in the /etc/fdmns directory, for example, should there be a system failure during
the remove operation. If this happens, the remnants of the removed domain are put in the /etc/fdmns directory as a file with a name in
this format: rmfdmn.domain_name.processid. If you interrupt the rmfdmn command or there is a system failure during its operation, check
the /etc/fdmns directory for domain names in this format and use the rmfdmn command to delete them.
However, if a partially-removed domain has been in the /etc/fdmns directory for some time, it can be risky to remove it with the rmfdmn
command: the partitions might have been put back into use and deleting them would make them unusable. [The rmfdmn command puts an unused
option in the fstype field of the disk label when it removes disks.]
In this case, use the rm -r command to remove the partially-recovered domain. Unlike the rmfdmn command, the rm command does not alter the
fstype field of the disk label.
EXAMPLES
The following example removes the accounts_dmn file domain. In this example, the accounts_dmn#credit_fs fileset is mounted on the /mnt3
directory and must be unmounted. When the verification prompt for removing the accounts_dmn is displayed, yes is selected. # umount /mnt3
# rmfdmn accounts_dmn # rmfdmn: remove domain accounts_dmn? [yes/no] # rmfdmn: domain accounts_dmn removed
FILES
Contains file domain names and devices.
SEE ALSO
mkfdmn(8), advfs(4), showfdmn(8), mount(8)
rmfdmn(8)