|
|
Sponsored Content
Operating Systems
AIX
Adding a Volume Group to an HACMP Resource Group?
Post 302535254 by aixromeo on Thursday 30th of June 2011 08:09:26 AM
06-30-2011
Guys Thanks a ton for the replies.
The issue has been resolved!
I did the following.
(Didnt create the VG using smitty vg)
1. smitty hacmp>(System Management)CSPOC>Storage>Volume Group>Create a VG
Selected both nodes
>node1
>node2
Selected the participating disks (one on node1 and the other on node2 same PVID)
Then I filled in the info > Resource Group, VG name and thats it..
My VG was created on both the nodes!
Then I went to the same options in point 1 and this time i selected Create a File system
Created my file system on the VG..
and now it is mounted on the active node and it moves with the resource group!
Thank you all
The issue has been resolved!
I did the following.
(Didnt create the VG using smitty vg)
1. smitty hacmp>(System Management)CSPOC>Storage>Volume Group>Create a VG
Selected both nodes
>node1
>node2
Selected the participating disks (one on node1 and the other on node2 same PVID)
Then I filled in the info > Resource Group, VG name and thats it..
My VG was created on both the nodes!
Then I went to the same options in point 1 and this time i selected Create a File system
Created my file system on the VG..
and now it is mounted on the active node and it moves with the resource group!
Thank you all
|
|
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Hello,
I have logical volume group of 50GB, in which I have 2 logical volumes, LogVol01 and LogVol02, both are of 10GB.
If I extend LogVol01 further by 10GB, then it keeps the extended copy after logical volume 2. I want to know where it keeps this information
Regards
Himanshu (3 Replies)
Discussion started by: ghimanshu
3 Replies
2. AIX
Does anyone have any simple methods for moving a current logical volume from one volume group to another? I do not wish to move the data from one physical volume to another. Basically, I want to "relink" the logical volume to exist in a different volume group. Any ideas? (2 Replies)
Discussion started by: krisw
2 Replies
3. AIX
Hello,
I am a french computer technician, and i speak English just a little.
On Aix 5.3, I encounter a name conflict logical volume on two volume group.
The first volume lvnode01 is OK in rootvg and mounted. It is also consistent in the ODM
root # lsvg -l rootvg |grep lvnode01 ... (10 Replies)
Discussion started by: dantares
10 Replies
4. AIX
Hi,
I have a requirement to monitor the HACMP Resource Groups. At present in my environment, if the Resource Groups fail over from preferred node to Secondary node we dont get notification.
Can some one help me in creating a scrript. I have more than one RG online. (Max 4 Resource Groups in... (2 Replies)
Discussion started by: srnagu
2 Replies
5. AIX
Hi,
Not sure if this is the correct forum to post this on but maybe a mod could move it if not.
When trying to move a HACMP resource group between lpars on AIX I receive the following.
State not STABLE/RP_RUNNING or ibcasts Join for node 2 rejected,
Clearing in join protocol flag... (11 Replies)
Discussion started by: elmesy
11 Replies
6. AIX
Hi,
I'm new to HACMP. Currently I setup a cluster with nfs cross-mount follow this guide:
kristijan.org NFS cross-mounts in PowerHA/HACMPMy cluster has two nodes: erp01 and erp02.
I'm using nfs4 with filesystem for nfs is: /sapnfs
Cluster start without problems. But I cannnot move RG (with... (3 Replies)
Discussion started by: giobuon
3 Replies
7. AIX
Hello. I am Running AIX 6.1 and PowerHA 6.1
I have an active/active cluster (Prod/Dev) cluster. Each side will failover to the other.
I have on my prod side an active volume group with a file system. The VG is imported on both nodes and active (varried on, file system mounted) on the prod... (3 Replies)
Discussion started by: mhenryj
3 Replies
8. Shell Programming and Scripting
Hi Experts
I need an script to add an disk in to the veritas volume manager disk group.
For example:
# cd /tmp
# view disk
c6t5d2
c6t2d1
c6t3d7
c6t11d2
c7t11d2
c6t11d6
Normally we add the disk like this:
# vxdg -g freedg freedisk01=c6t5d2
# vxdg -g freedg freedisk02=c6t2d1
#... (3 Replies)
Discussion started by: indrajit_preet
3 Replies
9. UNIX for Dummies Questions & Answers
hi,
I want to create a volume group of 200 GB and then create different file systems on that.
please help me out. Its becomes confusing when the PP calculating PP.
I don't understand this concept. (2 Replies)
Discussion started by: kamaldev
2 Replies
10. Red Hat
Hello Guys,
I want to create a file system dedicated for an application installation. But there is no space in volume group to create a new logical volume. There is enough space in other logical volume which is being mounted on /var.
I know we can use that logical volume and create a virtual... (2 Replies)
Discussion started by: vamshigvk475
2 Replies
LEARN ABOUT OPENSOLARIS
scversions
scversions(1M) System Administration Commands scversions(1M) NAME
scversions - Sun Cluster version management SYNOPSIS
scversions [-c] DESCRIPTION
Note - Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor- mation about the object-oriented command set, see the Intro(1CL) man page. The scversions command commits the cluster to a new level of functionality after a rolling-upgrade to new Sun Cluster software. With no arguments, the scversions command prints a message indicating whether a commitment is needed. OPERANDS
The following operands are supported: -c Commit the set of nodes that are currently active members of the cluster to the highest possible level of functionality. When you upgrade a node (either through upgrade to a new release of the product or by application of a patch) and boot it back into the cluster, some of the internal protocols on that node might have to run at lower versions in order to cooperate cor- rectly with other nodes in the cluster. When the cluster is in this state, some administrative actions might be disabled and some new functionality introduced in the upgrade might be unavailable. When you run this command once from any node after all nodes are upgraded, the cluster switches to the highest versions of internal protocols possible. Assuming that all nodes have the same Sun Cluster software installed at that time, all new func- tionality becomes available and any administrative restrictions are removed. If a node that has not been upgraded is an active member of the cluster at the time you run the -c option to scversions, the command has no effect because the cluster is already running at the highest possible level of functionality. If a node has not been upgraded and is not an active member of the cluster when you run the -c option to scversions (for exam- ple, if that node is down for maintenance), the internal protocols of the cluster are upgraded to the highest possible ver- sions. You might have to upgrade the node that was not an active member of the cluster to enable it to rejoin the cluster. EXIT STATUS
0 Success non-zero Failure ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWsczu | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
scinstall(1M) Sun Cluster 3.2 17 Aug 2007 scversions(1M)