Try "route add default 10.1.1.1" and then rerun "netstat -rn" and post the results. Post your /etc/netmasks file and post the results of "ifconfig -a".
----edit----
Actually after trying to manually add the default route, do a "netstat -nvr" and post that. This displays the netmasks...
Last edited by Perderabo; 06-28-2011 at 12:40 PM..
Reason: add -v flag to netstat request
Hi,
We are running AIX 5.2.
Our default gateway used to be IP Address A.
Our new default gateway is IP Address B.
A netstat revealed that our default route was IP address A.
We manually added default route with IP address B and removed the default route with IP address A.
However,... (3 Replies)
Hi,
I am new to solaris 10. What is the procedure the os takes if a default route is not configured? I am using a multihomed server with 4 interfaces. It looked strange to me this morning, because i had not defined a default route it defaulted to making one up, with the ip address of another... (9 Replies)
Hello I have a question regarding default route on AIX servers. (I am using a p5 5.3 TL9 machine).
in my output of "lsattr -El inet0" I can see there are two routes like below.
route net,-hopcount,0,,0,x.x.207.7 Route True
route net,-hopcount,0,,0,x.x.202.129 Route True
But... (9 Replies)
Greetings,
I am using debian squeeze to perform the following operation:
1. pxeboot Alix 2.c board into debian installer
When I get to the installer my laptop's dhcp server successfully provides an ip address but does not set up the default route. I am not sure how to provide this.
I... (2 Replies)
AIX version 5.3
when I try to add default gateway
# route add 0 192.168.100.254
Or
# route add default 192.168.100.254
I get the error
0821-275 route: socket: The file access permissions do not allow the specified action.
searching on google i came across similar... (5 Replies)
Hi All
Recently we have faced issue in SUN server
after reboot of node 2 default routs has been added to system as below
IRE Table: IPv4
**Destination*************Mask***********Gateway**********Device Mxfrg Rtt***Ref Flg**Out**In/Fwd*
-------------------- ---------------... (2 Replies)
Hi all,
actually i'm facing this problem,
we have 2 NICs on our VM.s with REDHAT 7.2 release,
we made the following set up as we needed to access them from both IP
ip route flush all
ip route add 10.130.11.0/24 dev eno2 tab 1
ip route add 10.130.10.0/24 dev eno1 tab 2
ip route add... (0 Replies)
Discussion started by: charli1
0 Replies
LEARN ABOUT PLAN9
netmasks
netmasks(4) File Formats netmasks(4)NAME
netmasks - network mask database
SYNOPSIS
/etc/inet/netmasks
/etc/netmasks
DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and
variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is
subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network
numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part).
For example,
128.32.0.0 255.255.255.0
can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition
to the standard sixteen bits in the network field.
When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being
the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a
lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net-
masks file. For example,
128.32.0.0 255.255.255.0
128.32.27.0 255.255.255.240
128.32.27.16 255.255.255.240
128.32.27.32 255.255.255.240
128.32.27.48 255.255.255.240
128.32.27.64 255.255.255.240
128.32.27.80 255.255.255.240
128.32.27.96 255.255.255.240
128.32.27.112 255.255.255.240
128.32.27.128 255.255.255.240
128.32.27.144 255.255.255.240
128.32.27.160 255.255.255.240
128.32.27.176 255.255.255.240
128.32.27.192 255.255.255.240
128.32.27.208 255.255.255.240
128.32.27.224 255.255.255.240
128.32.27.240 255.255.255.240
128.32.64.0 255.255.255.192
can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through
128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits
in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other
addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field.
Invalid entries are ignored.
SEE ALSO ifconfig(1M), inet(7P)
Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park,
Calif., August 1985.
V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519,
Network Information Center, SRI International, Menlo Park, Calif., September 1993.
T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif.,
December 1995.
NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility.
SunOS 5.10 7 Jan 1997 netmasks(4)